sennheiser ew 100 g2 power button fix

[@georgeyang2365]

Thank you very much for your nice work. I learned a lot from you.

[@SUNILRAHEJA]

Thank you so much for this video. I had a wireless microphone lying unused from so long since i could not spend money to get it fixed. this video showed me how i could fix it myself and i tried and it really worked. So happy to have it learnt myself. Thanks so much once again.

[@jonathanacosta4682]

😯.... Excelente Gracias...

[@jonathanacosta4682]

Por favor, podrías mostrar un Diagrama Sencillo para conectarlo los cables del pulsador al sensor ?.

[@jecjec2002]

Ahi esta todo explicado en el video, O me puedes contatar por email o f a c e book

[@jonathanacosta4682]

@@jecjec2002 Gracias, Por favor Cuál es su Dirección, para escribirle ....

[@cuentochino4399]

La tapita de plástico que tapa la parte de a tras se me perdió. Sabes dónde puedo conseguir una?

[@jecjec2002]

ebay tiene algunas www.ebay.com/itm/404537213733?hash=item5e304c0325:g:QDMAAOSwLK9lIh1d

[@amhey1]

I don't get it. Do you solder the switch on? Our microphone has a corroded switch. I hit it with a screwdriver and it came on. I guess it was because the screwdriver was magnetized. Did you put extra wires to solder to the switch. I didn't see the finished product! How do you remove the old switch? It looks to be soldered. Did you have to separate the boards so it was easier to get at the switch which looks to be inside the board? Is 045899 part the only thing I need, or do I need wires?

[@jecjec2002]

yea once the power button goes out you will need to put a new one. Our power button has gone out a few times and I just got tired of fixing it with original power button. People will used anything to push that power button and eventually goes out. The power button has four connection, one on each corner. You need to solder wires from opposites corners, any of this two opposites corners turn on and off the mic. and solder the magnetic switch to this to wires and then any magnet will turn it on and off. This way people do not mess up with the power button any more.

[@jaictampus]

what do you called that white thing that used to turn on the wireless handheld microphone??? where can we buy that thing??? Hoping for a reply! Thank You!

[@jecjec2002]

It is a magnet cover with white plastic, you can used any strong magnet

[@camillasalim3010]

good evening i have the same problem where my button need to be soldered but my friend who knows how to solder cant seem to detach the board to get to the actual board to solder it only wiggles letf to right any advice so it doesn't get broken

[@jorgeluishuacotamendoza1896]

hola tengo el mismo mic anda todo enciende normal y capta todo normal la comunicación con el cabezal que va a la consola de sonido el problema esta en que el micrófono no capta sonidos alguna vez grite muy fuerte y recién emite un sonido distorsionado entonces quisiera saber q es para llevarlo a reparar y no me salgan con que era otras cosas y etc

[@jecjec2002]

Nunca me apasado esto. Tengo varios mic de estos pero nunca me ha pasado algo asi. Puedes desminuir la sensivilidad del mic. tiene high med y low.

[@loyallen]

Looks very good. . . I need english :(

[@jagch6285]

No indicas el.proceso tecnico en si.