Serato dj pro with denon prime demonstration

[@razyel93]

This dude covered every step there is. I am not a Serato fan but if they would increase the waveform size I would use it maybe just for the colored waveform. I am sure they will improve it as they have been since the launch. Great video man, keep on spinning. ✌🏻

[@djshortefromphilly]

I appreciate that!

[@d.holland209]

Gratitude for uploading this video. Great video.

[@mikedubz5576]

Great video thank you so much for your service

[@ComingUpNextTime]

Great video man

[@djshortefromphilly]

Much appreciated..thank you.

[@bboymac84]

Great demo

[@CarlosRivera-b8d]

yo have your decks started to lag, I have the 5000M's and the platters dont stay in Time. they Lag. I am down to go with the SC 6000 non motorized now.

[@djshortefromphilly]

nope. I have never had that issue

[@DjSCode]

greate video, thanks SHORTe. Is it easy to switch from serato computer mode, back to usb for playing a track from a usb stick or internal HD and after switching back to serato mode?

[@djshortefromphilly]

Not sure cause I don't use serato anymore but, I will test it and let you know if its easy if I have time before my gig today

[@DjSCode]

@@djshortefromphilly wow that would be AWESOME!!!

[@DjSCode]

@@djshortefromphilly did you tested it?

[@ferozdj]

I have the same doubt! because in prime 4 it restarts when you make this change, right?

[@Ray-yt7mk]

I’ll like to know the first cable you connect from the player you say to connect it to the usb on the back,back of what. I’m trying to connect my sc5000 to serato. Thank you for your help.

[@djshortefromphilly]

This:Chroma Cables: Audio Optimized... www.amazon.com/dp/B083QMZ9L3?ref=ppx_pop_mob_ap_share

[@djshortefromphilly]

Or this; USB 3.0 Printer Cable, JSAUX Type A Male to B 3.0 Male (6.6ft/2M) USB 3.0 Type B Upstream Cord Nylon Braided Compatible with Docking Station, External Hard Drivers, Scanner, Printer and More(Black) www.amazon.com/dp/B07V6G1GYK/ref=cm_sw_r_apan_i_R06E7Z3JZ1S2ZMYK3CCG?_encoding=UTF8&psc=1

[@animeshbeladiya5470]

thankyou sir

[@djshortefromphilly]

NO PROBLEMO.

[@techsavvyhero]

Thanks for explaining how to make the SC6000M (in my case SC5000M) go in Computer Mode, so it can listen to the commands of the Serato DJ software. Much appreciated. I was trying to switch vocal samples with the pads on the SC5000M (like you would on the pads of the Rane 72) while my turntables are playing Serato Control Vinyl records. How is it done if possible?

[@djshortefromphilly]

I'm not sure sadly cause I stopped using serato..all I use now are the players by themselves or virtualdj with them..sorry.

[@oleglang5750]

I’m trying to use the SC6000Ms in Serato DJ, I’m connecting them using rca cables and each SC6000M’s usb connected to USB hub. Am I doing something wrong? This setup worked well with SC5000M but disconnects from Serato DJ approximately 25 minutes into the set using SC6000M. I’m using X-1800 mixer with Serato interface.

[@djshortefromphilly]

have you made sure youre logged in on serato?

[@oleglang5750]

Pitch N’ Play caused the issue, once I turned it off no more issues! Thank you!

[@2119rocky]

Thanks for the video, I jyst picked up a couple of Denon SC5000M Decks. What mixer would you recommend using with these decks I would want to use Stand Alone Mode. Don’t want to use the Laptop Thanks Man

[@djshortefromphilly]

DENON X1850 OR X1800

[@2119rocky]

@@djshortefromphilly Ok thanks. Would the Pioneer DJM S7 work fully with the SC5000M

[@curt356]

Question, how are your DenonSC6000m’s still holding up after a couple of years of having them. Also, is there away to midi mapped them to run stems?

[@djshortefromphilly]

mine work fine...loving the updates...also, I always use stems when i use virtual...yes, I have it midi mapped cause i dont use slicer so, that's my stem page.

[@AmgadMakarem]

Amazing tutorial! Can I do the same thing with Engine Dj app? And have it send data to my cs6000

[@djshortefromphilly]

Somewhat yes.

[@AmgadMakarem]

@@djshortefromphilly you mean straight from my laptop without the need to move my music and playlists to a flash drive? If yes then how?

[@lifesweb]

You where do I buy those dope skins at?

[@djshortefromphilly]

12inchskinz.com

[@therealdjblack29]

Great video, Hey, question, I have the 5000m's, I just subscribed to Serato DJ Pro and tried it out. The waveform is a solid green. It's not like yours with multiple colors. I guess this is the difference with the 6000's and 5000's. When I set the player channels, player 1 controller defaults to channel 2 on my x1800 mixer and player 2 defaults to channel 3 on the mixer. Do you get that same result? If so, can this be changed?

[@djshortefromphilly]

Yes I do...but I changed it in the software on virtual dj...ill try it on serato and update you ok?

[@djshortefromphilly]

Check my post on IG fam.

[@chadnliz2k11]

Serato wastes entirely too much screen on the Denons just for constant library. Cool video but stand alone is where it's at.

[@jersey21212121]

Do the Denon sc6000m has a dedicated sampler midi key

[@djshortefromphilly]

No.

[@jersey21212121]

@@djshortefromphilly How do you access your samples like horns sirens etc. without using laptop?

[@calendar64]

Can Serato DJ Pro be connected to Denon Prime Go ?

[@djshortefromphilly]

I believe so, yes...let me check the website.

[@djshortefromphilly]

www.denondj.com/prime-go

[@djshortefromphilly]

Hope that helps

[@1Twisteddj]

Just curious, is there a noticeable difference when connected to VDJ vs Serato??

[@djshortefromphilly]

Only in volume when it comes to recording...serato is loud...vdj is 0db

[@djbeasleytechno]

U on tik tok?

[@djshortefromphilly]

Yes same name