How to Replace the Battery on a Apple iPhone 8

My Favorite Tool Kit - amzn.to/2zvwUjB
Hot Plate Machine for repairs - amzn.to/2hnyqQ8
Heat Gun for repairs - amzn.to/2hlClgb
The camera used to film this video - amzn.to/2AuXTvL
This is a video tutorial on how to replace the battery on your Apple iPhone 8.
All models -
iPhone 8
iPhone 8 Plus
A1905
A1897
A1864
A1863
I used the following tools:
1. Small Phillips head screwdriver
2. Open Prying tool
3. Hair dryer or heat gun
Warning: Repairs will void your warranty with the service provider and manufacturer of the device. We are not responsible for any damage caused by attempting this repair.

[@bassinbillRC5300]

Good video. If I may. I personally would not even take off the flex cables connecting the screen to the motherboard. I have a tool that holds up the existing screen at a 90-degree angle. On one end is a spring-loaded set of jaws to grip the lower end of the screen and the other end fits into the charging port. The tool can be posed so as to keep the screen up at the desired angle. Once I do that, I can use a set of tweezers to slowly peel off the glue strips at the charging port end of the battery, basically spinning the stretchy onto the end of the tweezers. Once you get the battery hold-down adhesive strips removed, you can replace them with new ones that come with a battery kit. Before inserting your new battery adhesive strips, connect your new battery to the motherboard so as to get the right fit before you mount the new battery. I install the new battery tape onto the battery just like they were when you opened up the phone. Then it is simply attaching the battery flex cable to the motherboard. Test by turning on your phone. After testing on/off function, install your new double-faced adhesive frame strip all along the perimeter of your phone pressing into place with the pointed end of a plastic spudger. Once you have done that, remove the translucent tape backing. Close your phone, replace the screws on both sides of the charging port and you're done!

[@TG-nh9jx]

Is this guy a hot plate salesmen?

[@davidgsanchezc5363]

Hi, afer this process is done, do you have the battery healt data restored, I mean, do you have battery Health at 100% agin ???

[@deronsworld5384]

Did you get the battery health to show after you change the battery?

[@jakubmazanek9745]

nice job

[@bumingdeath]

If you have the effort to replace that battery. Why you just dont replace the new adhesive strips and the screen seal? Otherwise its a good tutorial.

[@CH-pv2rz]

Yes he should have simply peeled back the adhesive strips when he wanted to remove the old battery and then used new ones to install the new battery...

[@bill210kouk]

Nice!

[@Figjamxlaststar]

Should start a drinking game, take a shot every time he says hot plate!

[@martinmck505]

Ha ha ha ha ha 😂

[@kasebuchanan4890]

All you have to do is pull the adhesive strips if your gonna replace the strips

[@ScottPlaysKeys]

Thank you, clear and very informative.

[@remynisce33]

You're repeating yourself, you're repeating yourself..

[@TonyStark20999]

Scott lang

[@savagegaming587]

Do you give away iPhones?

[@joanneazeez9938]

Guess after battery removal you phone won’t be waterproof unless apple Do it for you thanks for sharing

[@blakechapman7070]

I know how to take the battery out i didn't know where th plug was

[@Andreaskep]

Not waterproof anymore

[@saeoce4794]

andreas stavrou resistant*

[@joanneazeez9938]

Think it only stays waterproof if apple Replace the battery if you Do it yourself it won’t be waterproof anymore

[@Reeljoymedia]

I work at Apple and this tutorial makes me squirm lol

[@michaelanderson9792]

Ok found service on ebay $69 battery swap

[@angelvikernes]

Hola :v

[@akak8299]

youre so handsome