Service Tutorial K1 Max Replacing Filament During Printing

Accessories purchase, Please contact our official email or website, remember to attach your machine type and accessories pictures
Official email：[e-mail]
Official website: www.creality.com
Any technical support in need, Please contact our official service email，remember to attach your printer model、complete orderscreenshot、purchase link 、printer product SN and the issue relevant video or picture .
Official service email：[e-mail]
Any inquiry of firmware and software，Please download it by creality official website：www.creality.com/pages/download
Creality firmware obtaining tutorial： • Video

[@guaracycardoso3589]

Obrigado.

[@HikaruGCT]

One thing you forgot to mention here is REMOVE the clip before you click extract or you will pop the teflon tube!!!

[@ohfussumgeknickt1393]

Und was kann ich machen wenn er das neue Filament nicht einzieht? Es kommt einfach nichts mehr aus der Düse, und ich habe die Rolle zum ersten mal gewechselt

[@crealityafter-sale5706]

Hi, if you encounter any problems, please feel free to contact our after-sales service and they will help you solve the problem as soon as possible. (Official service email: [e-mail])

[@jansengusmao]

How can i change the color of filament in a specifc layer using the creality print software? I have a k1 max . Thank you

[@ruianastacio]

Hey did you find how to do it?

[@AntiKipKay]

@@ruianastacio I've been looking for information all day and night and found nothing. They need to add it to the software. You can't even change the gcode to do it at layer change. I tried it and it stops printing before it even lays the first layer.

[@charleeh369]

@@AntiKipKay Orca slicer has the K1 Max printer profile. You can slice and add a 'pause' at your chosen layer to do the filament color change. I was able to do filament painting with hueforge now!

[@AntiKipKay]

@@charleeh369 I tried the orca slicer but the printing times are doubled. I don't think it's fully optimized for the K1 yet.

[@charleeh369]

@@AntiKipKay Orca slicer is still in beta and it's not fully optimized for any printer. Try uninstalling/reinstall Orca slicer and reload default K1 profile printer. You probably need to adjust the settings depending on what you're printing and which types of filaments.

[@paulevans7742]

Next time, try it without the music