How to replace Mirror Turn Signal Indicator Light Blinker Lamp Mercedes-Benz A, B, C, E, S, CLS, ML

How to replace or remove Door Mirror Turn Signal Indicator Light Marker Blinker Lamp on Mercedes-Benz A-Class, B-Class, C-Class (W204),
E-Class, S-Class, CLS, ML (W166), CLA, GLK, SL, SLK, GLA in just six easy steps.
For US customers:
Left Door Mirror Turn Signal Marker Lamp for W212 E W204 C W221 S: amzn.to/3KZKAKb
Smoked Lens Switchback White Amber Dynamic Sequential Blink LED Side Mirror Turn Signal Light Assembly For Mercedes-Benz C E S CLA CLS GLK GLA Class etc: amzn.to/3L3KRMu
For UK & Europe customers:
Car Rear View Mirror Indicator, Turn Signal Light, LED Blinker Lamp, for Mercedes - Benz W221 W212 W204 W176 W246 X156 C204 C117 X117 (for left): amzn.to/3yiH3zb
Reflector Light Smokey Lamp Fits，Led Side Wing Dynamic Turn Signal Light Flowing Rearview Mirror Indicator Blinker，for Mercedes-Benz A B S C E-Klasse GLA GLK W176 W246 W212 W204 C117 X156 X204 W221 W218: amzn.to/3myWeln
Aliexpress:
Car Rear View Mirror Indicator, Turn Signal Light, LED Blinker Lamp with Dynamic Light, for Mercedes - Benz W221 W212 W204 W176 W246 X156 C204 C117 X117 (for Left & Right): bit.ly/3YwtTt2
Required tools:
- T10 Torx (Find 12-Piece Magnetic Torx Screwdrivers Set HERE: amzn.to/2DJ8yZT)
- trim tool: amzn.to/3uy4FMd
READ THE COMPLETE ARTICLE HERE: bit.ly/3ZUBtP9
All about money that makes money. Change the game! 8 steps to know everything you need to know to get there! -- bit.ly/3sYgQDM
In this post you will find affiliate links, meaning if you click through an affiliate link and make a purchase, I could make a commission. Thank you!
If you enjoyed this video tutorial, make sure to give it a thumbs up and share it with your friends. Also, don't forget to LIKE and SUBSCRIBE!
More VIDEO TUTORIALS on www.servicetutorials.com
Follow us on INSTAGRAM: service_tut...
SUBSCRIBE our KZbin channel: / @servicetutorials
This video is only for informative purposes! We do not take any responsibility and we are not liable for any damage as a result of the information contained in this video. Use this information at your own risk. Thank you!
If you have any suggestions about new tutorials, please let us know in the comments section!

[@kierancrowley9096]

Good video. Top tip from my own experience... Check the connector pins first! So I took down the mirror housing and tested my new LED. It didn't work. But I happened to notice the connector pins (the blue harness plug ) in the mirror unit were bent. After I straightened them the new LED worked fine. That got me thinking that maybe the old LED wasn't even broken. Sure enough, I popped it back on and it was working fine after straightening the connector pins.😂

[@Servicetutorials]

@@kierancrowley9096 thank you for the info!

[@davestarr.8772]

Good video: I wore thin work gloves which gave great grip when pulling the shroud up and over the mirror. The rest was easy - exactly as described. Thx

[@Servicetutorials]

Thank you too for the feedback!

[@user-fj5mq7lp5x]

Great tutorial! I knocked my mirror & indicator wasn’t working, took the housing off like in your vid & put it back on & it started working! Thanks! 👍

[@Servicetutorials]

Thank you for the feedback!

[@benoitraymond1997]

Thank you for this video, the explanation to remove the mirror cover was spot on. My issue was related to the two prongs having corrosion so I used sand paper to clean the prongs and added a bit of Dielectric after cleaning. Works like brand new. Thanks again.

[@Servicetutorials]

Thank you too for the feedback!

[@griseldxherri4157]

It was very helpfull , thank you bro , keep up with the great contect

[@user-zb7rv6ks7o]

thank you, you helped me :)

[@ivarsmatisons]

Paldies par informaciju 3:58

[@adnansadikovski7517]

Thanks 😊

[@musha229]

TOP,bravo my man very nice expleination of all the stuff in the video

[@Servicetutorials]

Thank you too for the feedback!

[@LpAntorax]

This really helped me! Thank you!

[@Servicetutorials]

Thank you too for the feedback!

[@Moinuddin-pd2uz]

Thanks mate good video very helpful

[@Servicetutorials]

Thank you too for the feedback!

[@williamhache5628]

Great job nice and simple

[@Servicetutorials]

Thank you too for the feedback!

[@irfant4968]

Bravo

[@himo3973]

Perfect tutorial 👌

[@Servicetutorials]

Thank you for the feedback!

[@emanuelgrigoras3950]

Great tutorial, man! What type of led is it? I mean the bulb model. Thank’s!

[@ryan4372]

I just cannot find any for the CLC 180 (the orange light indicator is slightly longer). I’ve looked everywhere lol. Nuts. Says these fit but the the second indicator line looks shorter

[@johnjkizer6399]

Great video Can we just replace the light bulb instead of the whole lense

[@Servicetutorials]

No, you can’t. Thank you for the feedback!

[@luky196]

Hey, thank you for tutorial, but after changing light my blinker have error message and blinking twice as fast inside, any tips how to fix it ? Thank you.

[@user-fj5mq7lp5x]

Mine was doing the same after I knocked it. Took housing off straightened the prongs that go into the light made sure they were straight put housing back on & worked. Took a couple of goes though just make sure it’s in place properly.

[@lululu111]

How did you fix that? Now I have the same error messages😂

[@eddthirty4065]

Thanks for the video. I checked my 2009 CLS and it has a different mirror housing, it doesn't separate like that and is a single unit.

[@Servicetutorials]

Thank you for the feedback!

[@foxhunterC137]

How did you manage to do it, I have the a CLC from that same year

[@s1003232]

my god this look uncomfortable and not smooth, like you do it for the first time yourself as well.