I'm guessing that this engine is fitted with the later oil pump driven from the crankshaft? Recommended oil change procedure with the old gear type pump, was to refill the sump before removing the old filter. Otherwise, it's possible to find that the pump refuses to prime. If that should happen, the pump cavities need to be packed with petroleum jelly which is a nuisance, to say the least. Does anyone at Rimmer's recall the Unipart GFE158 filter being replaced by the GFE175? They looked identical, but the GFE175 allowed oil to drain down causing a delay in oil pressure build-up on cold starting. I ended up buying old stocks of GFE158s to solve the issue.
@RimmerBrosTV2 жыл бұрын
Hi there, thank you for your technical question. Please feel free to email our Land Rover Specialists at: lrsales@rimmerbros.com and make the subject 'FAO Andy R' and they will help discuss the technicalities with you further.
@azuanaziz72953 жыл бұрын
Thanks bro for your information
@shirleyboy88594 жыл бұрын
Good video, very useful. I have the same model. I think my "Transfer Chain" needs replacing, Is this a DIY job ( I am a competent Mechanic ) or are special tools needed? Cheers.
@sebastiansalvador32124 жыл бұрын
Great video sir, thank you so much for the info.... how can I buy one of 'em p38 catalogues???? My 96 4.0 is the only manual p38 down here in Ecuador and it's pretty hard to find original parts....
@RimmerBrosTV4 жыл бұрын
The catalogues are free if you just want a single one. You can go to rimmerbros.com/ and highlighted in red on the right is "free catalogues". You can either order one or download any of them as PDF files. We ship parts world wide. Hope that helps :)
@stuarthumphries68174 жыл бұрын
I so love my Range Rover (1996 P38 RHD, 4.6 HSE, duel fuel). I need a new battery, but the bonnet release has failed on the driver’s side. Managed to open approx 1/2 “ and get WD40 in the area but still can’t release the leaver. Can you help??? StuartH.
@RimmerBrosTV4 жыл бұрын
Hi, Stuart. Think this is a job for a garage I'm afraid.
@stuarthumphries68174 жыл бұрын
Rimmer Bros TV OK. Thank you for letting me know! Appreciated.
@ianjamesbrady6841 Жыл бұрын
Excellent
@terrystratford12355 жыл бұрын
Can u not use fully synthetic oil? Would this offer better protection? How often should the items you've done, be replaced?
@RH-xr6oz5 жыл бұрын
Did you ever get an answer to this, as I too wonder if fully synth is not better?
@kennymacm30314 жыл бұрын
I would go with what was recommended by the manufacturer.
@user-pc5ub5gs8m3 жыл бұрын
Can I use other oils besides 10w, maybe 5w40
@Thanos.m3 жыл бұрын
Oil is a very controversial topic but you have to bear in mind that the Rover v8 is essentially a 60s engine designed to run on conventional oil so it won't benefit from using modern synthetics you run it on 20w-50 conventional they usually run a little more quiet on it but 10w-40 semi synthetic and per handbook will do just fine