Seth Thomas Westminster Chime Tambour Mantle Clock after repairs

[@ogClockTV]

One more thing to note here, Upon further research and with the help of Conner's Clocks, I've confirmed that the new movement in this clock was actually manufactured this year, 2021! Brand spankin new mvoement!

[@Fred-nz9dp]

Very nice and it should be running without issue for next 20 years with some oiling!

[@ogClockTV]

@@Fred-nz9dp Let’s hope so!

[@woodentrainseriesofficial9511]

Pls fix the revere.

[@mmmm_3466]

Гещ7щннщшгг ее

[@RyanWeinhold]

Finally this clock got fixed! It feels great that it runs in your collection. This mantle clock indeed has a good chime. Good clock repair Kam

[@ConnersClocks]

Glad to see it working again, Kam. I’m happy for you.

[@deathplaysrobloxmore3602]

I’m glad this clock is fixed! This was always my favourite clock!

[@GodzillaZachary]

I'm so glad that you got it fixed and running again. It sounds the same with the chiming to me. It was a good idea to replace the movement but keep the chime rods. It's now your first repaired Seth Thomas clock in the shop! This thing has never looked any better and I love how it was rescued from the landfill/dump. Great job repairing it, Kam!

[@trapzbeatz346]

Glad to see this running again! 👍

[@DannysClocks]

Glad to see it with a new movement and in good working condition finally! :D You made the right call to be honest, that old movement wasn't worth rescuing with those plastic gears and parts.

[@DannysClocks]

@The Clock Collector Because plastic is cost cutting. :) There are much better quality movements (example: this new 340-020A) which have fully brass gears. Generally it's undesirable to have plastic in a clock movement because they're parts that wear out much faster than an equivalent part made of brass.

[@feli0999]

Congratulations on fixing that clock!

[@ogClockTV]

Thanks!

[@FidgetTV72]

Congratulations for fixing the broken clock! I am glad it working again yay

[@cxddlygoidkosmos7969]

You are becoming very good with repairing clocks 1st empower grandfather clock now this Im proud of you my friend.

[@ogClockTV]

Yeah thanks!

[@donaldpaquette7151]

I love watching the chimes strike. Thanks for using a great camera angle to see each of the hammers.

[@ogClockTV]

Glad you liked it!

[@bprife]

Beautiful clock and great sounding of the chimes

[@jaksclockscollection2705]

I love it Great chiming sounds

[@Jamestube8439]

Glad to see you finally got this clock working! It sounds awesome!

[@ogClockTV]

I am too!

[@michaeldavis5106]

now you have another clock that will go off when the shop madness happens haha. grait job on fixing that clock!

[@ogClockTV]

Thanks!!

[@blue_hedgehog_gaming_clock9580]

Omg yesssss!!! Glad you could pull it off!

[@lucagamer681]

Congrats on 17K Also do the video of the clock that was broken you fixed

[@lukascz6023]

Good video 👍

[@ogClockTV]

Glad you enjoyed it!

[@RainerandRobert]

I'm glad your Seth Thomas clock is all fixed Can you please get a new movement for the German Westminster Chime Clock please I want to see the German Westminster Chime Clock all fixed in your next video best wishes Tomodachi Life With Rainer and Robert

[@ogClockTV]

It’s gonna be tough for me to find a movement for that one.

[@Aerlasta]

The second closest hammer to the camera sounds nice

[@ceilingfansclocksminecraft1226]

By looking at the original movement, I would guess maybe the spring to the balance wheel was the cause of it not working. Also I’m glad this clock is running again!

[@ogClockTV]

The issue mainly was the escapement platform. You know how there are two very small metal rods that stick out towards you when looking at the back? They hang over the one small gear at the front which makes the clock tick. One of them was missing and somehow broke off.

[@ceilingfansclocksminecraft1226]

@@ogClockTV Oh I see. Where’s the escapement platform? Is it the balance wheel and all that mechanism? I would love to know more about that.

[@fazbear2546]

this clock does not run, but you fixed it now it's running again.

[@ogClockTV]

Yes.

[@epiccoolgames]

It’s so cool that you fixed the clock! I have a question. Are you going to keep the original movement?

[@ogClockTV]

I most likely will.

[@JackMustang]

I have a Seth Thomas that is kind of similar to that. But has 2w holes. 1 for the running, and 1 for striking the hour & half hour. It is unfortunately unable to be fixed. The model number is E511-003. And I wonder if Hermle has a movement for that kind of clock. The chime is basically downward which is basically on the bottom of the clock. I do have the winding key as well. The pendulum does nothing, and when I move the hands, the chiming mechanism is completely broken. I can only hear the striking starter thing when I move the hand to the striking position. So, I am thinking about replacing the movement someday, but I don’t know what Hermle model will fit in that particular design clock. That Seth Thomas was built in July Of 1953; and I want to see it run again. My Uncle Dave gave it to me. And I don’t want to get rid of it. I am clock lover. And I love my clocks!

[@vintagesimplexfirealarmsof6440]

i am glad you fixed it and can you try get the hac clock running again if possible

[@ogClockTV]

Idk about the HAC tbh. It's a tough process.

[@vintagesimplexfirealarmsof6440]

@@ogClockTV is that one oiled and is it in beat

[@clocktube7010]

I have a Seth Thomas mantle clock but sadly doesn’t run because the balance wheel broke. So I’m possibly getting a new movement in it soon

[@ogClockTV]

Good luck on getting a movement!

[@clocktube7010]

@@ogClockTV I already purchased one

[@ogClockTV]

Ah nice.

[@italianogeorgianomonoposto]

nice, Kam can you try fixing that Westminster HAC German clock. its really good clock.

[@ogClockTV]

HAC may be much harder unfortunately.

[@italianogeorgianomonoposto]

@@ogClockTV is it possible to replace the overwound keyholes?

[@perfume6815]

文字盤の臼ベージュ小さいのに音の迫力すごいね❤️☕️😌💕💓😍💓上品な時計⏰💥

[@vincentvango5338]

Good video, 👍 the breathing is a little creepy.

[@ogClockTV]

My apologies for that. It’s a habit and I’m working on getting rid of it.

[@vincentvango5338]

@@ogClockTV hahaha ! No need to apologize,... I love the sense of humor. IE. it's a habit.. 🤣🤣🤣 a great sense of humor is hard to find these days! Thanks, 🤘

[@ogClockTV]

Oh lol!

[@Jeronus1]

I’m looking for a grandfather clock that doesn’t just tell the time of day but also the year, month of the year, and day of the month. Does such a grandfather clock exist?

[@ogClockTV]

As of right now, I am unsure. Sorry.

[@gameratwork1075]

When will we see a new clock collection update?

[@ogClockTV]

No clue yet. I have just been insanely busy with personal events and haven't had much time to make videos

[@gameratwork1075]

Oh.

[@gameratwork1075]

Request: Joe boxer alarm clock

[@ogClockTV]

I may consider that one.

[@SamTheMountainBikeBeast]

How much did the movement cost?

[@ogClockTV]

$250

[@luger9774]

So what are you going to do with the old movement?

[@ogClockTV]

Probably just keep it for extra parts.

[@luger9774]

@@ogClockTV Ah.. Oh I just thought of this would any of those hammers on the old movement fit on the Sandringham or something?

[@RandomnessKevin]

Hardwork huh?

[@ogClockTV]

Wasn’t too hard. It was just hard getting the new movement inside the case.

[@blue_hedgehog_gaming_clock9580]

1:47

[@uc8tv]

Goodbye.