Setting a Second Reference Position on Mill and Lathe - Know Your DN, Episode 20

[@Lrmarsh16]

Good stuff, thanks Mark!

[@seilkim9402]

Great presentation. Looking forward to another one.

[@johnn.katsaoras4958]

It is an awesome feature, personally on my LYNX2600 I have the possibility for more than one reference position points (G30 P2, P3 etc). Is it possible to have many different reference position points as an option also in a milling machine? How many is the most?

[@ObiWanPL]

maybe now you will show each cycle one by one in the manual guide for lathe and mill, for beginners?

[@andyhildreth414]

Remember everyone, do NOT accidentally change your #1241 Z value on a mill. This is your tool change position and modifying it will likely screw up your tool changes and hang up your ATC. Of course, if you do that, look for the Know Your DN episode #1 on Tool Change Recovery.

[@MrEtorres323]

Can someone please explain whats the advantage of having G53 G30 vs just having G53.

[@markchristopher5809]

Sure. You will need G53 G30 when commanding a transfer axis (A or B) on a two spindle lathe (if there is an offset other than Zero in the work offset page). If the is an offset in the register for this Axis, the machine will go to work offset zero first, then go to G30 position. To be safe, I always use G53 G30 to send a transfer axis home.

[@randomtechcnc]

Hi Can you explain Renishaw setup in nhp500

[@markchristopher5809]

When you say Renishaw setup in NHP... in what regard? The tool setter? The probe? Calibration? Inspection? Give me a little more detail of what you are looking for.

[@probapro7068]

Background music is not loud enough, make it louder in next video. Other than that it was OK.

[@William97864]

Music is perfect, no louder, or it will be annoying

[@probapro7068]

@@William97864 You didn't get it, did you.

[@William97864]

@@probapro7068 I got it, just a difference of opinion

[@markchristopher5809]

Thanks for the suggestion. We are going to tone it back in the future videos.