Setting blade gap on Cumberland plastic granulator

[@thomasdudley6055]

wow thanks i work with this machine everyday have to set blades all the time but never seen it torn down this are i learned a few things

[@WilliamHutson81]

I sharpen these at my job and it takes me about 10 minutes to set one up on the sine plate to make sure it's even and flat but even after I check it and grind them the ends are about .003 bigger than the middle. Even on the wet grinder it will suck up from the heat. That's probably why the ends hit first.

[@javierquintero3785]

Excellent work friend. What is the power of the motor and how much does it produce (kg/h or lb/h)?

[@nadjianadjia8271]

Plastic chopper blades wear out quickly in a one-hour time. Can I know the reason and solution that helps me improve them?

[@timramich]

I just watched the guy do this at work. They never get the gap closer than about 1/16". They never use any kind of tools to make sure these are properly torqued or even check the gap. It's all by eye and impact gun. I'd like to start doing it instead.

[@zacariassilvestre1308]

ola essas facas sao de aço onox 420?

[@CuriousEarthMan]

Thank you!

[@barcelonafood2280]

Excellent Dear

[@shaiknoormohammed7039]

How much this cost bro?

[@kingsupra5023]

I I have crusher for pet plastic but I do not know how to set the blades Can anybody help me?

[@nbpplastic3052]

Nice working environment. Your knife tolerances are larger at the center because whomever is doing your sharpening has a machine that no longer grinds the blades true. As a machine with a traveling bed or traveling power head moves back and forth the center of the travel wears 2X faster than the ends creating a curved bed surface that will show in your blades. Your knife grinder should replace their wear parts on their machine to bring the machine closer to true or have the machine worked over by a rebuild shop.

[@eugenesincere3359]

sorry to be so offtopic but does anybody know of a tool to log back into an instagram account?? I was stupid forgot my account password. I would love any tips you can give me.

[@kelvinmatias4107]

@Eugene Sincere instablaster :)

[@eugenesincere3359]

@Kelvin Matias Thanks for your reply. I got to the site thru google and Im waiting for the hacking stuff atm. Seems to take a while so I will reply here later when my account password hopefully is recovered.

[@eugenesincere3359]

@Kelvin Matias it did the trick and I actually got access to my account again. I am so happy:D Thank you so much you saved my ass :D

[@kelvinmatias4107]

@Eugene Sincere You are welcome xD

[@hiramkhackenback]

Wear kevlar gloves with rubber friction dots when handling blades, and when installing blades wear kevlar sleeves. And don't stop a rotating rotor with your hand!!!!!! Some health and safety is common sense.

[@asimsaikia9451]

I want to buy a pet bottle scrap grinder machine . But what type of blade is appropriate for this machine ?

[@maxymjobin660]

Shut the fuck off loser...people who wear glove are not to be meant in the industries

[@iantelesdeoliveira]

Alguém do Brasil assistindo esse vídeo?

[@Anythingthatisloud]

hmmm. i will have to ask them about that. thank you.

[@rajaali-hu6rf]

Brett Shaw hi,I have a wire granulator with different diameter and the sieve size 3mm,can you guide me the distance of rotary blades and fixed blades thanks in advance