ha ha I remember a few years back was doing slab survey using rotating laser with staff (or sometimes just a measure tape) and manually putting data on A2 size drawing ... comparing to this method I was like a dinosaur LOL Thanks for the upload!
@SITENG2 жыл бұрын
Hi Negotium! Yeah it's all changing fast, even TS06 becomes a dinosaur's tool now 😊 If you set a robotic one it will do all survey for you as per nice set grid etc. Whatever it is I really love TS06 as you can really do everything with it😁
@rasalih92002 жыл бұрын
Thank you so much for your effort engineer!
@SITENG2 жыл бұрын
My pleasure! Happy to have you here in our community 👍👍
@onearder28873 жыл бұрын
I didn't knew you Can level only on one face. Thanks
@SITENG3 жыл бұрын
Hi One Arder! I always using one face. Sometimes for resection I am using both faces to reduce the error, but 99% I use 1 face :)
@TheMrasimqureshi3 жыл бұрын
Another fine video. I was not clear about in which job did you record all the survey measurement of the floor. Did you created another job or was it included in the same job. You said previously that your method saves the memory of the instrument with this method. Please define it.
@SITENG3 жыл бұрын
Hi Asim! When doing a survey I always open a new job so when I am taking it from edm there is no mess :)
@manimumin79724 жыл бұрын
Wow this is amazing
@SITENG4 жыл бұрын
Thank you Mani :)
@sergisergi84974 жыл бұрын
Hi !! Can you please show us how will look all the points that did you take the masures in Autocad? And is not clear how to check verticality of the pillars! Thanks!!
@SITENG4 жыл бұрын
Sergi, I will soon start site videos so I'll show this. The easiest way to check verticality is to 'shoot' the bottom and top, your co-ords should be the same, when using ref. line your offset should be the same.
@fesocanman3 жыл бұрын
Hi, Please is it possible you train someone how to use the Total Station, I already had a degree in Civil Engineering, but am struggling to get work experience. I am based in Essex, so travelling to London shouldn't be an issue for me. I will be eagerly waiting for your response. Thanks
@SITENG3 жыл бұрын
Hi fesocan! Keep looking for junior engineer/ assistant engineer job and you will learn the quickest way after watching my videos about setting out of course😊 I am outside UK now and will be back in few weeks. Unfortunately can't promise anything as I will be probably too busy, but working on a course for all you guys 😁
@fesocanman3 жыл бұрын
@@SITENG Thanks for your quick response. It's just been a bit challenging to getting a job without experience. I hope to get something sooner
@SITENG3 жыл бұрын
All the best!!! If I know something I'll let you know 😁
@fesocanman3 жыл бұрын
@@SITENG Thanks
@andreirafaila36043 жыл бұрын
Interesting videos. You should do this for a living mate!(see you on site)
@SITENG3 жыл бұрын
HAHA! That's the plan ;) see you!
@onearder28872 жыл бұрын
Hi can please tell me can you do levelling with doing face left and face right of the points. Many thanks
@SITENG2 жыл бұрын
Hi! Not really sure what do you mean by that. Once your resection is ready you can use EDM for levels (providing your control targets have set height)
@iyceintegrated90627 ай бұрын
How do you get the height of Instrument
@ruijackson76973 жыл бұрын
Approximately what is your salary? please share as this is a big question for those entering the field.
@SITENG3 жыл бұрын
Hi Rui! I will do a video soon about the salary for engineers :)
@ruijackson76973 жыл бұрын
@@SITENG and also what are your working hours
@SITENG3 жыл бұрын
Hi Rui! It's typically 10h a day (8-6), I will do the video soon :)
@DanielZergaw Жыл бұрын
Survey setting out
@SITENG Жыл бұрын
survey program, setting out
@catalystcreations77713 жыл бұрын
Hai sir i am from kerala iam a surveyor i just started a company but i fail due to with out a totalstation. My family contition is very poor i cant buy a totalstation due to money is my problm i request you to give me a old total station for working my company Its my request sir pls save my life
@SITENG3 жыл бұрын
Sorry, but I don't have any old station to help you. You don't need one to find a job though. All the best with your company!