Setting Up my DREAM HOME STUDIO

Instagram / coltcapperrune
My Photography / coltcapperrunephotos
Vero vero.co/coltcap...
Website coltcapperrune.com
My Outdoor KZbin Channel / @trailtherapynash
Purchase All Music Gear HERE: imp.i114863.net...
Gear In This Video
Gator Racks sweetwater.sjv...
Jumperz Snakes sweetwater.sjv...
Avid HD Interfaces sweetwater.sjv...
Avid HDX Cards sweetwater.sjv...
Music I’ve Worked On / from-the-studio-of-col...
Best Vocal Mic Under $100 imp.i114863.ne...
Best Budget Interface imp.i114863.ne...
Best Budget Studio Monitors imp.i114863.ne...
My Gear:
Ultra Wide Monitor amzn.to/3DaYR2G
Monitor Arm amzn.to/3cV7mo8
Gator Racks sweetwater.sjv...
Microphones
Lauten Audio Atlantis sweetwater.sjv...
Lauten Audio Eden sweetwater.sjv...
Manley Reference Cardioid sweetwater.sjv...
Lewitt LCT 1040 sweetwater.sjv...
Neumann TLM67 sweetwater.sjv...
Neumann KM184 sweetwater.sjv...
Warm Audio CX12 sweetwater.sjv...
Byerdynamic M201 sweetwater.sjv...
Shure SM7b Standard sweetwater.sjv...
Shure MV7 sweetwater.sjv...
Lauten Audio LA-120 SDC Pair sweetwater.sjv...
Lauten Audio LA-220 LDC sweetwater.sjv...
Lauten Audio LS-208 sweetwater.sjv...
Royer R-121 sweetwater.sjv...
Sennheiser MKH 416 Shotgun sweetwater.sjv...
Sennheiser MKE 400 sweetwater.sjv...
DJI Lav Mic sweetwater.sjv...
Rack Gear
Avid HD Interfaces sweetwater.sjv...
Avid HDX Cards sweetwater.sjv...
SPL PQ sweetwater.sjv.io/y20QaG
SPL Channel One mk3 sweetwater.sjv...
Rupert Neve Designs MBT sweetwater.sjv...
Rupert Neve Newton Strip sweetwater.sjv...
SPL Vitalizer MK-3 sweetwater.sjv...
Distressor sweetwater.sjv...
Audioscape V-Comp www.audio-scap...
Audioscape Spring Verb www.audio-scap...
AudioScape 260 VU www.audio-scap...
UA 1176 imp.i114863.ne...
SPL BiG imp.i114863.ne...
Pope BAX 2020 EQ www.popeaudio....
Eventide Omnipressor sweetwater.sjv...
Interface imp.i114863.ne...
Drum Bus / Vocal Comp imp.i114863.net...
Radial EXTC imp.i114863.ne...
Mix Buss Comp imp.i114863.ne...
CAPI Mic Pre www.capi-gear....
Coil Audio Mic Pre coilaudio.com
Power Conditioner imp.i114863.ne...
Interface imp.i114863.ne...
Monitor Controler sweetwater.sjv...
Budget Monitor Controller imp.i114863.ne...
Budget Patch Bay imp.i114863.ne...
Flock Audio Patchbays sweetwater.sjv...
Monitors / Headphones
Favorite Monitors imp.i114863.ne...
Second Monitors imp.i114863.ne...
Make any Speaker SOUND BETTER imp.i114863.ne...
Favorite Speaker Stands imp.i114863.ne...
Budget Speaker Stands imp.i114863.ne...
Best Mixing Headphones imp.i114863.ne...
Tracking Headphones 1 imp.i114863.ne...
Tracking Headphones 2 imp.i114863.ne...
Bose Bluetooth imp.i114863.ne...
Plug-ins
Fabfilter imp.i114863.ne...
Noire Piano imp.i114863.ne...
Komplete 14 imp.i114863.ne...
KIT (Neve) Channel imp.i114863.ne...
Melodyne imp.i114863.ne...
Waves Tune imp.i114863.ne...
Slate Trigger imp.i114863.ne...
Waves Element Synth imp.i114863.ne...
Instruments / Amps
Handwired Fender Deluxe Reverb sweetwater.sjv...
GTR Load Box / IR sweetwater.sjv...
Favorite Synth imp.i114863.ne...
Acoustic Guitar imp.i114863.ne...
Resonator Guitar imp.i114863.ne...
Maschine imp.i114863.ne...
Keyboard imp.i114863.ne...
GTR Amp imp.i114863.ne...
Iconic Guitars iconicguitars....
Lauren Audio www.lauren.audio/
Camera Gear
Main Camera bhpho.to/3P0Iyt1
Main Lens bhpho.to/3ZqcHHi
Vlogging Lens bhpho.to/3ykQG1F
B Roll Lens 1 bhpho.to/3l61Qj3
B Roll Lens 2 bhpho.to/3sj70Mh
Telephoto Lens bhpho.to/3CCYLQD

[@billyfields7722]

I love you organizing your cable management, it makes it simple to use. Keeping it simple to use.

[@ColtCapperrune]

Thanks!

[@flite25]

he said "WE? it was all ME" lol. Studio looks so good man

[@ColtCapperrune]

Lol! Thank you so much!

[@simonbarth3181]

Hahaha

[@g3cd]

@@ColtCapperruneHaha, I just published a video on KZbin 6 weeks ago called "German Organisation & Effiency: Epic Studio Tour" where I talked about labelling every single cable with a Brother labelmaker and documenting all the power / snake / MIDI inputs as well as using power conditioners with lamps. Well done, I approve! 😂

[@BrandonHartOfficial]

Man. Your studio is immaculate. Happy for you. Miss you!

[@ColtCapperrune]

Thanks bro! Come visit!

[@ChaxSouthSide]

Amazing job Colt! But, you are missing the most important piece in every studio - couch! 😄 Can't wait to see which one is gonna sit next to that beautiful diffuser

[@DuncanTembo]

"Dream Home Studio" is a freaking understatement! And I'm mad at you for that!! ❤😮🎉😂

[@caseybowen3826]

Since your apartment setup you have been inspiring my studio setups. Now have my Focal MG Clears + monitors and sub one. been loving it. Cheers to you Colt! thanks for the videos.

[@ColtCapperrune]

Amazing! Thank you so much for following all these years!

[@jonathanbarrios6405]

I know it doesn't mean too much, but as someone who has to DIY most of my own studio, I'm so, so happy for you. nothing like the enjoying the fruits of hard work.

[@ZachMeadowsMusic]

The space was super rad before, but even more-so now! The producer’s desk/ rack was a great idea. Well done Colt! Although I’d expect no less of you lol. Can’t wait to see the Atmos rig!

[@jonrussell4894]

I started working for an AVL integration and production company at the start of this year.. and making custom length snakes and cables has been one of my most valuable skills ive learned how to do. The longest part, at least for me, is soldering all the XLR and DMX ends. We also make our own ethernet cables but thats its own beast making sure you have your twisted pairs in the right order. But all in all its been a valuable skillset for me building a studio in my home.

[@kennethhughmusic]

Thank you so much for sharing your journey over the last few years. I could feel the joy through the PC monitor! Keep it real and enjoy :)

[@micturner_9167]

So happy for you colt. I'm never going to unsunscribe. You inspire me s deeply

[@micturner_9167]

You doulsbe doing nterior design on the side

[@larswillsen]

2 days ago? How could I miss this .. ? .. well better late than never :) - Looks astoundingly huge .. man, imagine mixing through that gear 🙂

[@schmuckeprinz]

Yeeeah! Gear Tour! ❤

[@Terry_Dale]

I have been watching your channel since you first built that room, to see it evolve and become what you have now has been a great experience. So happy for you to have your dream room, it looks (and must sound) amazing. Nice work Colt.

[@tronmosesmedia4816]

I'm loving it. Looks very nice and neat. You take good care of your equipment.

[@theomack8573]

looks great! I wonder if you will end up moving your patch bay? Eye level is so much easier, or a waist high top loader rack so you cans see what you are doing.

[@charlienelson2395]

Hi buddy, two thoughts: it’d be cheap, you can cut an amber light gel into little strips and cover the white light to creat a warmer glow on the conditioners. Also, I’d encourage you to put some kind of ventilated covers on the back of the producers desk, (like a type of lattice), so someone doesn’t accidentally kick the back of your gear when sitting on a stool. It all looks great! Great job filming too!

[@IKnokBeats]

Room turned out absolutely beautiful!!!! Great job!!! Love the back rack desk. Great idea.. enjoy!!!✌🏽

[@shanegrush]

Zane and the Jumperz team is pretty incredible. They did my entire studio. If you haven’t seen their QuickConnect stuff, it’s incredible! All my wall plates are made with that, and they install and uninstall as easy as connecting Cat5/6. No soldering! 🙌🏻

[@airwavv7054]

this studio is absolutely gorgeous. The desk, the gear, the vibe, it’s all there. Hope you love the new room, lot of hard work paying off :)

[@AaronDaniels123]

Genius idea for the producers desk!!

[@braxal6983]

I know your favorite word Colt. Pumped!!!! haha. It is all good. I am glad you are excited.

[@Jawmsie]

WOW! That labelling of cables helped out on my home rig, and I literally only deal with maybe 12 inputs at my most well-equipped. Guess it's good to get into the habits early!

[@thelab705]

Yes brother!! So happy to see the room modifications !! I would imagine the bass traps in the corner and rear wall must be a significant difference. Great Stuff Man 🤙🏼🤙🏼🤙🏼

[@TheStudioHacker]

Bro!! That room is so sick, that would be a dream for me

[@2011Rollsroyce]

NEW STUDIO looks Amazing, God Bless You, Keep up the Great Work.

[@yillars]

Excellent job! and looks so amazing man! 👏 I was on the hunt for a 3-bay rack but couldn’t find one that met my needs, so I decided to have one custom made. At the last moment, we came up with the idea of adding holes between the bays. This way, we could connect a device in rack A to rack C without having to loop the cables from behind. It reminded me of a point in a video where I saw someone opening a hole by hand😅; it turns out I went through the same process! 5:13😝

[@ilikeweirdonames4187]

This is really good, pretty, beautiful........Make a video on how to organize your files and Projects.

[@TheNathanMChannel]

It's quite an amazing achievement. It certainly fulfills my love of all things knobby and switchy. Those two 500 series units seen at 11:38 with the curvy meter doodad is especially aesthetic. Not sure what that is, but it's very tasty looking. This is the first room I've seen where someone achieved a pure bare wall look, but it's actually absorbers.

[@bobeschism9426]

Damn, I've never thought of using a cloth to gently place the outboard in the desk racks. And you can plainly see the result of not using a cloth on the top of your Distressor at 11:17! Great tip.

[@BlackenedNL]

Dude! What a vibe in there, would be a dream to work in there. And that in your home..... Congrats on all of your success Colt!

[@user-wi1776]

Wow beautiful! Good for you!!! I hope one day........:-)

[@ColtCapperrune]

Thank you so much! Work hard and stay consistent and it’s totally possible!

[@yymmdd2391]

Someday, I also want to have a studio like that.😍

[@sideast]

looks great ! would love to see video on gear&connections how its all patched in

[@gregoryivesdolbyatmosmusic]

DadMOM works really well in my ATMOS room. I still recommend it. also running the newest MTRX II, which I upgraded my old MTRX I purchased two years ago. Love the new setup. Sold my older MTRX to a friend in LA at a post house. It was just what he needed and only had to spent maybe another $1200 to get the new one and my AD DA and cards went into my new MTRX II.

[@yakoboss]

It's not your dream home studio It's my dream home studio! Great job!

[@RealCbase]

oh yea, killer! Have fun in this beautiful dream room. 😍

[@idakamusic2930]

Great vid! Levalore or however you call it makes great motorized curtains if you need

[@ryannicholl9054]

You may be too close to the project to see the raw plywood poking out from between your rear wall diffuser panels. Flat black paint may be too much of a pain but you can also staple up black “stop grow” cloth for use in gardens or just black cloth. It’ll make the joint just that more rad. Keep up the great work - you’re an inspiration.

[@ColtCapperrune]

There’s definitely some refinements to make to the room, that being one of the main ones. Thank you!

[@MillYinzMedia]

First I have loved this series and how it turned out. It's been a blast watching how you tackled every aspect of it. Am I the only one who wishes the live edge was on the producer's side? Also, can you add doors on the back of the racks on the producer's side so they don't put their feet all over your gear?

[@Birke1981]

This looks so clean! Congratulations to your new room! Have fun!

[@heliobluesrock]

I miss your espressos shots! They make your amazing videos even better!

[@TonyThomas10000]

You and Andrew Masters seem to have a lot of energy for disassembling and reassembling your studios over and over. Wait until you get old like me. That is why I live ITB!

[@ColtCapperrune]

I’m done with it now hahaha.

[@TonyThomas10000]

@@ColtCapperrune Until next time. LOL!

[@kwameeyiah]

Just to create content😊

[@merkotan4679]

So amazing! The vibe of the whole video is like spring, when everything is growing and blooming )

[@trulyintense6613]

Very cool! Research, planning, execution hard work, hell yea!! Good fer U!

[@johnnydub3546]

Love to see the progress in the room. Forward bro!

[@CallieKirkwood]

Great video, keep up the great work Colt.

[@thestudbq]

Glad to see everything turned out nicely.

[@ColtCapperrune]

Appreciate it!

[@DrProgNerd]

Been waiting for the reveal. So so *so* cool. Man, I'm stoked for you.

[@TheTeacherMusic]

Awesome room transformation

[@DlllonJ]

Dream studio there bro! Well done, the Phillips lighting is so clean and the warmer hue is perfect for those late night sessions. Realistically after all that effort you're gunna have to chase those wires through the floor once the Atmos comes, can't have those cables everywhere.

[@ColtCapperrune]

I’m absolutely dreading cutting holes in the floor, it is five layers, thick with doubled, and triple up floor joists from when we built the house around this studio. I’m nervous. It will make the soundproofing of the room significantly worse, in addition to the headache of actually doing it. But time will tell, it may annoy me to the point where I do it anyway. Thanks for watching!

[@Benprogfuse]

I’m thinking you may ultimately want to move your 3 rack bays to the left of your desk at 90°, then get a high-top table as your producers desk, to set behind you with stools.

[@skyyyazer]

Incredible work man! The new setup looks so legit. Thanks for sharing the whole process with us.

[@Chaos-Dynamics]

Looking really great, what a nice setup you have there. You’re definitely going to enjoy your hard work. I would love to hear the sound of the room. With those two subs and the tuning I bet the low-end will be awesome. Love the producers desk as well, great job 👌🏼

[@riotsoundsstudio9501]

Phenomenal man! Congrats 👏🏼

[@GeorgeAmodei21]

Came out Really GOOD!

[@kevnblvk]

For monitoring in our studio with DADMAN we have an S4 but we mainly use the MOMDECK on the stream deck + for control of the monitors. The volumes jumps at 1db increments which doesn’t bother us but may be good for you to know.

[@andygreen5565]

Looks great man.

[@EdgaAlanFlow]

Totally nuts on gear! Show us what u got! Awesome job - besides all technical aspects, amazing aesthetic finesse👌

[@adambakercollege]

We do things right here in the Mitten, Colt!!!

[@schmuckeprinz]

What a nice Studio!! Inspiring!

[@Steviee8]

Love it! WE need to build a producer desk. You mean "I" need to.... Let's get that put together". Let's (ME) put that together. LOL Wish I was there to lend a hand I absolutely love the re-building phase. Kudos to jumperz!

[@ColtCapperrune]

Hahaha thanks for watching!

[@KernSound]

Amazing job. You are good in helping us dream.

[@reffe03]

Man I love everything about these vids and I love you! Almost cried seeing how the studio turned out, can't imagine how you felt! Thank you for being so inspiring

[@scottiesomerville5763]

What a studio! You have the perfect setup man. I love it!

[@Jarrix]

Sick Studio man ! thanks for the inspiration

[@martijn_nl]

Looks absolutely great! Now this project is coming to an end ( does it ever? ) what's next?

[@dalestandard1095]

You've got that right. It NEVER ends.

[@MrBlessup247]

Fantastic job colt you’ve work your backside of and it looks amazing ❤✌🏽 & happy mixing

[@robflores5172]

You be having a dream studio setup every other year lol

[@HindsightHero]

You are sooo dang organized!!! It’s looks beautiful, Colt🎉

[@JedWunderli]

Congratulations, Colt. That's a beautifully amaing room!!

[@frnx0077]

You doing a couch at the back? Its looking amazing! Congrats and well done.

[@chosendhj1]

Super hype for you man!! The room looks awesome! Congratulations!!

[@rapdup]

Looks amazing Colt. Would love to see a rundown of the gear, routing and reasoning. Thanks for taking us on this journey.

[@Plauton66]

Well done ...lookin´really good !

[@chriselliott5122]

Colt, this setup is legit! Great job!

[@sparecordingstudios3145]

Yes we did it😂😂😂 I like this channel so much ❤❤

[@leandrobremer-music]

Contrags on the room Colt. It's looking great! I can't help but thing that it needs some decoraction though :)

[@mixedbydk]

It looks amazing man!!!

[@JamesArthurHurley]

“Construction is done”. Best Colt video intro yet. So stocked for you!

[@sebk2669]

what a dream place !!!! amazing ! congrats for all this build you've done

[@ColtCapperrune]

Thank you so so much!

[@funkyvogelfutter3147]

nice video ...thanks for sharing ... i love the studio ... looks so nice .... peace

[@jamesthomas70]

Looks awesome brother. Inspiring!

[@pro_influence]

This is Wow, it's a beautiful and amazing ❤

[@DerickMcelveenJr]

I love it man super inspired you gave me plenty ideas for new studio.

[@Sinslikescarlet100]

Into it!

[@tommih597]

You should do some LED strips around the ceiling clouds!

[@thumbody1]

Very nice vibe! Well done. I understand about neat cable management. I HATE cables exposed and strung everywhere. I don't have as much gear as you but I have quite a bit. My solution was to put it all into a single big rack. That way all of the cables are in one location. The only cables leaving the rack are computer monitors, power, and my external guitar rig Ox Box. The problem with that is that my rack is full and I have no more room for additional gear. That kind of makes me less enthusiastic about buying more gear and that's a good thing. :o) That's how much I hate cable-clutter! I understand that is not an option for you. 500 series stuff has been a Godsend for me. A lot of gear can be crammed into a tight space. As far as documenting the cabling goes, I have an Excel spreadsheet that I made and spent a ridiculous amount of time in the planning stages with it before I ever hooked anything up or made any cables. Most of my interconnects are either TRS or XLR. I only have one DB25 unit. All of my patchbays are TRS. I make all of my own cabling and snakes using quality cable and plugs so I can make them whatever length I need to in order to keep the internal rack mess at a minimum. I use colored shrink tube at both ends of each run and on each snake and those go onto the spreadsheet along with the patch point locations for every I/O in the patchbays. There are no duplicate colors anywhere in my system so problems are easy to trace even though I have never had any interconnect problems whatsoever due to the excessive planning I do before ever making any cables. I use the spreadsheet as a guide as I am making the cables so when it comes time to plug everything in I use the spreadsheet as a map. I am always amazed that everything works as it should, the very first time, every time. I learned that lesson the hard way after doing this stuff since the late 70's. I would like to see a video about how you keep all the dust cleaned out of the racks and off of everything. That is always a problem for me and I haven't found a solution I am happy with. Feather dusters and brushes just move the dust from one place to another and don't really clean anything. I haven't been able to find a brush attachment for a vacuum cleaner with long, or soft enough bristles to get the job done satisfactorily. Especially inside the rack. Thank you for documenting your journey. It is inspiring to see how someone else does it.

[@djagile]

Space looks great!

[@clintyoung9902]

Stream deck would be interesting. Could control monitors, lighting, Flock, etc etc in one place. And YES, gear rundown vid!

[@JimBaldree]

Love the room! I’m also in a bonus room above the garage. I mix tv shows from here every day. You won’t regret a DAD MOM. In addition to the normal stuff, like dim, cut, talkback, you get layers which expands your sources. Say you have a different layer just for referencing ATMOS. You can quickly listen to just sides or just tops etc to see what other people are doing with the space. Quickly being able to listen to different down mixes is nice as well. Plus no added software to run it. Just load up your last profile and get to work.

[@ColtCapperrune]

Thanks! That option is currently top of the list, just haven’t made the commitment on it yet. Appreciate you watching!

[@yonikessler1912]

Go for the Dadmon. I've used one before with a MTRX Studio and it's one of the nicest monitor controllers if not THE nicest monitor controller I've ever used. It's worth every penny, for what my opinion is worth I say just go for it.

[@Bonzvy]

OH MY GOD is this great. Congrats to you and even if it sounds weird i am proud of you. even more if i remember where you started!

[@Capt.Tillo13]

Looks amazing !! 😁 Thanks for Your Contant!

[@BillyHarisTME]

Amazing work. Looks great.

[@EdgardoRosa]

Looks awesome!!!!!

[@claudemanning6578]

Definitely want to know what's in the racks, would also be interested in knowing if you'll still be using the B room for anything and was there any gear that didn't make it in this room or that may not remain after atmos

[@sagarchawla8145]

Congrats Colt 👏👏

[@jairedrob]

Gear tour and how its all connected !!!

[@ColtCapperrune]

I’m on it!

[@rburton5731]

this is so encouraging to see congrats to you

[@ColtCapperrune]

Thanks so much!