Setting Up Network Connectivity for Roland Inkjets

[@jelx1107]

This is the absolute best tutorial i have watched on this topic. This not only solved my connection issue, but educated me on how the network connection process works. Thank you so much for putting this together.

[@RaceAngelSS17]

I upgraded my internet and which pretty much brought my office to a screeching halt. After hours of trying to get the computer to communicate with my Versacamm VS-300i this video was exactly what I was looking for. The explanation was very clear and understandable. I had read so many articles and watched so many videos and still nothing was working to get my printer back on line. These videos will be my first "go to" in the future.

[@patentagosse]

At 2am, 'was ready to print when I realized I've lost my network connection due to a reset I made an hour before. The job has to be printed absolutely. Gladdly, I found this amazing tutorial which put me back on track. OK now it's 3am but at least the printer is almost finishing so I'll get to sleep soon! Thanks Roland for the 24/7 tutorial access!

[@travismccloskey9733]

Very helpful, even 12 years later.

[@NEMZOOO]

Man i had to factory reset so my printer could calibrate; our print sizes were very incorrect .. all the network addresses came up as all 0s. You have saved my life thank you so much!

[@arshdeep-hu5of]

Thank you so much for your video helps alot

[@changofett77]

Very instructive, it was usefull for me. Many thanks Roland

[@wilwad]

Thank you very much. About to connect a Roland printer to a client's network.

[@kevinramos3124]

Need more people like you!

[@sHSxGorDiiNhoO]

Thank you, it helped me a lot!

[@billpearre9195]

I don't show anything in the default gateway when I typed in ip config? I see the IP address and the subnet mask numbers. Any idea what I'm doing wrong?

[@tcal9230]

Did u ever get fix I have Same issue

[@RuralVibesVa]

Thanks!! This was so helpful!

[@jcksn8711]

How do I configure an IP in a plotter SP- 540V ?

[@fullanotaylorwiz2158]

Muito Obrigado...Funcionou Na Perfeição

[@mdw1338]

Thanks alot!

[@naveenakalankasahabandu4706]

is this direct connection or through hub?

[@gomobileprintingandsigns4747]

hello I Need the old versawork 4.0 or older software for my Roland VP-540 Please

[@alexhardsof]

excelente amigo ok el video

[@staciaposson8382]

my roland soljet does not have the system info option . .. what do I do

[@damianmartinez6325]

Excelente. Ayuda

[@svcdaredevil]

osem....thanks ROLAND

[@mamarkia12]

tkank you very mach

[@DLAmy]

AN : Thank You I'm up and Running

[@llMuratll]

thank you very very very very veeeery much :))))

[@bretwithvinyllabnw7072]

Thank you! It worked perfectly.

[@aminem18]

thank you so=mush :)

[@elbandido8699]

Hello ...hope someone can help me. I have an Roland PNC 1100 ... sadly i lost my connecting cable. I used an Serial to usb Cable. Now i buyed a new one ...and there will be no connection. I know that there is another pin wiring if i read right in the web. Or must i only buy a special cable ? Please can someone send me a link to a cable that works for me ? Best way is Windows 10 but i can install an older OS if there is no other way. Thank you and forgive my bad english ...greetings from Germany

[@MinelabCTXKing]

It did not work for me, I need help