Setting up servo winch &/or rear steering with DX5 rugged.

Simple little walkthrough on setting up servo winch and rear steering

[@tcolbymartin]

So helpful! Planning a 4WS and servo winch set up and wanted to know how to do it best on the rugged vs my other tx’s. Thanks a bunch!

[@400AGLNET]

Dude, I have looked and looked at video after video. Not sure how but your video hit home for me and I was able to get my 4ws all set up on my scx24 Deadbolt with a SR315rx on my DX5C.. Thanks for your video...

[@jbsgarage6371]

Tim. Thanks a lot for making this video brotha. I’ve had to come back to it several times over the last year for programming different rigs, because I forgot what I learned from watching it the time before. Super helpful man!👊

[@joshlvn7732]

That was awesome when she took off in reverse, I’ve done it and bet 99 % watching have done it!👍👌😂

[@birddog435]

Perfect video for setting up my DX5Rugged and SCX24!!! Awesome, and thanks!!!

[@patrickbishop6296]

Dude you made that sooooo SIMPLE....TY!!

[@rickboyster1515]

Perfect video, got me going quick with the new radio

[@rustysglass]

Wow great catch man!!! Thanks for the info too been wanting to set up rear steer!!

[@lilhick33]

Thanks a lot man Your 4ws set up work perfectly awesome videos

[@garycooper1162]

Awsome as always thank you.

[@SavageX125]

Learned the hard way to shut my truck off. It broke my winch cable lol

[@gabrielhoesel407]

needed this vid

[@BlindGuyRc]

Great tips. 😎👍👍

[@Kon7ptor]

Thanks a lot!

[@JoshDitzlerMusic]

I set my winch to F just as you did. Was easy. Thank you. However… I power on the vehicle and the winch has constant power just retracting. The switch doesn’t work art all. Any suggestions?

[@ovidium8020]

How did you manage to set up the steering end point adjustments?

[@integrityrc7356]

I am using it as a Plow modular on my dx5 rugged

[@KaosCreator69]

What cell phone mount are you using on the transmitter? TIA

[@Jacksquatch69]

Are E, F switches on the DX5 rugged spring loaded? or are they toggle switches? My current radio they are toggle and its annoying to try to get it back to the middle ( for winch or steering ) - edit: 6:18 sounds like its spring loaded?

[@TRDAdventures]

Yea they are spring and go back to center.

[@Jacksquatch69]

@@TRDAdventures Cool thanks

[@integrityrc7356]

I need help please on my servo for my Plow.

[@integrityrc7356]

I have the same transmitter. Want the servo to go much more down and up.

[@TRDAdventures]

That would be adjusting the travel of the channel you are using

[@integrityrc7356]

@@TRDAdventures thanks. I did that. It’s 50% more bud not enough. How do get it to go more or Continuously run till I stop it like a winch?

[@TRDAdventures]

@@integrityrc7356 you would need to modify the servo, or use an actual servo winch

[@raceman66]

Can you not put rear steer on aux 1?

[@TRDAdventures]

You can this was just the open channel I had on here

[@angeliquechurilla121]

Hey bro are u able to pm me I need help can't seem to get any with this remote I just can't fig it out thanks

[@TRDAdventures]

Only way to pm is thru the The FB page or on Instagram

[@CheeZyNutZ]

How do you change the brake trim? I cant find ANY videos and the manual SUCKS!!!! I have my winch set to the F button as well but every time I winch in it turns my brake down and then I have no reverse!!!!! This remote is so damn aggravating

[@TRDAdventures]

You go in to the rates setting and you will see like steering, throttle, brake and below them you will see switch, select it and ch age the switch to inhibit

[@DrunkSleth]

OMG thank you. Been searching for days on how to turn brake off that channel. If you ever make another vid on this, make sure to add that bit 😂. Thanks man

[@jayhosh8126]

Can anyone tell me if there's a way to flip the steering controls, such as instead of rotating up to turn left you rotate down to turn left?

[@TRDAdventures]

You can reverse the steering

[@jayhosh8126]

@@TRDAdventures thanks, I just wasn't sure how exactly, been looking around and also read the manual but can't find exactly how to do it, it's my buddies DX5 and I was trying to help him

[@TRDAdventures]

@@jayhosh8126 open the menu and scroll down to “reverse” enter then select steering

[@jayhosh8126]

@@TRDAdventures thank you so much that worked :D

[@joeygodoy509]

Thats embarrassing lol