Setting up the Axe-Fx II XL, MFC-101 MK III, and Mission Engineering SP-1

[@travisfritts6262]

Cooper! Thank you soooo much! Your video saved me hours of frustration and manual searching! I had my MFC and SP-1 up and running in 20 minutes (I paused a lot so that I could keep up!). Everything works PERFECT! Bravo, sir! Thanks again! You are a GIFT to the Fractal community!

[@LostWithinOfficial]

My sincere thanks for this video! I was pulling what little hair I have left out of my head trying to figure this out on my own!

[@Dwoalin]

I have my first Axe FX on the way (an Axe FX II XL+) so I imagine this video is going to be incredibly helpful once I get it. Thanks so much!

[@gtrmusic69]

I hope you never delete this video. I don't have the MFC yet but it's coming in about two weeks. First thing I'll do is go right here.

[@even200x]

All the tutorials assume we all purchased the footboard as well. I have yet to find a tutorial that explains how to set up the expression pedal without the board. I just have the rack unit connected to a PC.

[@G66eu]

+Brian Chamberlain kzbin.info/www/bejne/eH_chKGtbrV7Y5Y

[@lyo1718]

awesome video I just got the pedal for my axe fx xl2 , thank you man , defiantly deserve the like and subscribed

[@mjborey]

Thank you for this video. Saved me..

[@CJTeffner]

Excellent, thank you!

[@yjm100playloud]

Hi Cooper I just bought the AxeFx and matrix power amp and two 2x12 Mesa boogie cabinets I'd like to know if I have to change something on AxeFx

[@mrk4510]

Geesh, that's allot of stuff. Man i just want my Guitar to sound Cool but i might have to go to school to learn how to use this thing.

[@artstramentalistperez]

Does anyone know what speaker's Cooper is using on his instructional video?

[@alessandro3000]

Very nice explaining. Helped me alot. Thanks!

[@oriellevi5346]

i have the sp-1 and i did exactly the same like in the video but it seems that i need to turn on the pedal ( leds on ) to STOP the wahha and not the opposite... how do i set it up?

[@r.llynch4124]

I guess the carter 6 hr tutorial for sale @ 49.00 covers the xl+ too? thanks

[@ernieumass]

Where do you get those cool magnetic labels!? I found some but they are different than those, and there are very few out there.

[@clintwilson338]

Just got my axe fx 2 XL+ bundle and it didn't come with a that cable????

[@dalefaulkner2348]

Hey Clint I just found out it doesn't come with one!! you have to go buy a xlr cable. You think they would include one for the price you pay!!

[@Rickmayan]

What's the main difference between the Faslink and the ethernet I know the faslink is a standard XLR but about functionality?? I just got my Axe Fx II XL and I am using ethernet cause that is what I Had.

[@arstocker]

The Faslink cable provides the same functionality as the Ethernet/Ethercon connector but with the added advantage of easier to find XLR cables (cheaper too). If you are at a gig and your Ethernet/Ethercon cable breaks you will be less likely to find a replacement quickly.

[@SamPlaysBass49]

Great video, everything worked except setting up the Mission Control. It's all wah, all the time on patches with wah.

[@AyBi_Studio]

doesn't work for me either.

[@jeffloven839]

sure would be handy to have a video that explains how to check/update the firmware on a used mark lll I purchased...

[@dba4292]

5 years late but for others, I think the steps to do this is in the MFC-101 manual.

[@erifnogard]

Any idea of how to assign i.e. preset 55 to IA01 and preset 247 to IA02? I jest need for now to have a clean and distortion tones, thanks!

[@ogmakefirefiregood]

And this is why pro's have guitar techs...

[@mrtmcmorton]

life saver

[@RiesLippy]

my MFC 101 mark3 does not work with the xor cable as faslink with the XL+ . Do i have to buy a special faslink cable? It only works with midi cable

[@JasonWB007]

That's cool, it helped me with the offset, but there was a really good video awhile back where you could set up the pedal to control wah AND volume by using the EP2 input for the switch and using it to control the volume and wah engage, but backwards. How do you do that?

[@Adieu]

hey cooper. even after turning off the auto engage function and doing all the steps above, all my presets still auto engage the wah. is there anyway i can turn this off :(

[@Dj2Splash]

Danesh, you need to update your Firmware to Quantum 1.x, then you will see the XL in Axe FX mode.

[@verificationsandwich]

i got a problem with my mfc101, all is in default and by pressing "reveal" button it should switch between presets and scenes, however it doesn't, it always stays in "preset" mode. anyone got any idea? i tried factory reseting, but no change.

[@behzaddanesh4355]

hey man, i cant set up mfc, my mfc and axe-fx doesnt comiunicating. may be this is my case: when i go to edit=> set up=>axe-fx mode=> here i cant find axe-fx xl. is this because my mfc frameware hasn't been updated?

[@sj01sdale]

6:03 before you get to the SP-1 settings...

[@GeorgeVGuitars]

Cooper, what is the name of the song playing in the background? :>

[@desyguns1]

My MFC 101 keeps going back to the set up mode showing X001 and no patch names, then after a few seconds 'AXE FX NAME TIME OUT' shows, and no matter what I do (including resting the MFC101) I cannot get back to my patches. And when I am changing preset 1-17 the MFC101 is showing X001-X017 and the AXE FX II is not changing at all! I have reset the axe fx in utility and I can change the patches from the Axe FX by using the toggle, but I cannot change the preset there other way round. And no preset names are showing! Please help!!!!

[@eddiem4868]

desyguns1 has changing the firmware do anything for you?

[@mrmres]

Does it have a "uni vibe" effect?

[@BigMeatSunday]

either you are on big ass dude or your new Magisty is pinner... either way I love my Axfx xl and my Petrucci collection

[@JorgenForsMusic]

Great run throug. Thanx! (Background video game muzak is somewhat annoying on such videos though - sorry :-/ )

[@donharrold1375]

Complicated

[@l-maerecord1205]

❤ Thanks you somuch 🙏 Review Very Clear, Thanks thanks.🥳🤩🎸🎹🎧🎛️