Setting up Torque pro on an Android phone with ford enhanced. Powerstroke

I tried to show a complete install on a virgin phone. Most of the videos I've seen left out too much for me to do it without research so I made my own. Included are some special pids needed for the Powerstroke.

[@endurotruckererniedesjardins]

Ive learned more about my 6.0L from Ron then anyone else. Thankyou to the family for not removing his very valuable lessons we learn from.

[@skylerhouston]

yes absolutely greatly thankful!

[@brianjames6394]

I just found this channel and I'm so thankful to Ron and his family!

[@thoroughbread1975]

The fact that most problems that I have researched and videos that I have watched, have mentioned the knowledge that this man took so much time out of his life just to help others on how to diagnose, and repair these diesels is amazing. It is the simple fact that people like him make owning these diesels possible without breaking the bank. Manufacturers these days want you to spend your hard earned money on these common problems that should actually be recalls. People all over the united states have been educated and have noted that they learned something from Ron. It is sad and as I have written this post I have welled up with tears because he is in heaven now. This world we live in needs more people like Ron. He is gone but in a better place, and he's still to this day teaching people. I wish I could have been a friend or even met this down to earth gentleman. RIP Ron, you're truly truly missed by so many, and my heart goes out to his family because they were so blessed to have him in there lives. God bless you Ron and the family.

[@silvergrizzly316]

Phillip you're exactly right! When I found Ron's channel I was excited beyond words. I had only watched maybe three of his videos only to find out that he was killed only two days prior, my excitement turned to tears and I didn't even know of him. I've been watching and learning and he has educated me on diesel mechanics in so many ways, I'm forever grateful and thankful. To Ron's family, Thank you for leaving up his videos and Thank you for sharing such a wonderful man with us, God Bless you all ❤

[@erniehernandez765]

I concur with Phillip Ross > I have learned so much from Ron the Lord bless his family. Ernie Hernandez

[@fordbossss]

Still helping us powerstroke owners everyday, respect.

[@abrahamabud4001]

This man was a legend. RIP Ron. Thanks for all your help.

[@SN1PE]

Here I am buying yet another 6.0 after not having one for 5 years. Thank you Ron for all your help over the years and to to the huxell family for leaving his content up! Ron helped a TON thru his videos with my first 6.0 and I’m scouring his vids yet again! RIP Ron 🙏

[@cook4015]

To Ron's family and himself thanks for sharing your knowledge and wealth of information with the world you've helped many people over the years and you still are today. God bless your family for keeping your KZbin account active not a easy thing to do I would imagine. RIP Ron you're a legend!

[@droid1152]

It's 2019 and never knew a single thing about Ford powerstroke Diesel's, my son purchased an 05 f250 6.0 no start, I have watched every video, from Ron, and because of him I have learned alot and fixed this vehicle, I just wanted to say I am very sorry for your loss, to his family, lot's of prayers and thank you for allowing Ron to continue to help people, and touch there lives, God bless!!

[@Toledonitro79]

Can you give me some ideas of where to look from your experience? I'm buying the same type for truck as you did.

[@endurotruckererniedesjardins]

Had to revisit to learn how to set up my torque pro again on s new phone, thanks again to the family for keeping Ron's videos up.

[@deepbludude4697]

I was bummed to hear of his passing but im thankful the family has left his awesome videos up RIP DTR!

[@stephensallak2059]

Ron has been so helpful during his time on youtube. I bought my first truck yesterday, an 06 crew cab lariat, and there's no way I would have felt comfortable with the purchase without Ron's way of explaining the 6.0L system.

[@turbomac8859]

I just found Ron's channel today and he helped me with this video, thank you for keeping up his content.

[@PatriotPaulUSA]

Ron's videos have helped me soo much over the years, Thanks for keeping his videos up. God Bless.

[@christophercandler8681]

I have been watching your videos because I am learning so much from you on working on my 2006 Ford F350 Lariat 6.0L Diesel. I downloaded the Torque Pro app and just finished watching this tutorial video. You explain it in detail and I really appreciate you taking the time for making the videos. Hats off to the person for filming you (I assume it is your wife-of course her and the kids get 95% of the profits!). Thank you so much, it is greatly appreciated.

[@rcalzadilla]

This is best presentation I have ever come across. I have had Torque Pro for 3 years. Thank you. I have '08 Equinox 3.4L 6 cyl. I tow a small pup camber with it, about 2900 lbs, this Equinox's limit for towing is 3000 lbs (with electric brakes on camper). So I am close to the limit and worry what may happen to the transmission, so I monitor the transmission's temperature sensor when towing. Recently I messed up something in the app and wasn't getting the temperature readings correctly. Now it's fixed. Your video clarifies everything for me, again. Thank you.

[@jamesaubrey1965]

Thank you Ron you was awesome we still learn how to repair our vehicle. Rest in peace and God bless your family...

[@truckfarm6241]

Sorry for your loss. Thank you for keeping your dads channel going. I am in the middle of building an OBD 2 blue tooth, Torque Pro, & 8in Tablet setup for my 99 7.3L. This video has helped me a bunch! I will be pulling a camper with her and need to keep an eye on the Temps and Pressures.

[@ArmadaBoats]

I 2nd your thoughts @Truck Farm. Deepest condolences to Ron’s family. I am struggling to get my adapter talking to my ‘02 7.3L. If I plug in Blue WiFi super OBS (mini) adapter into modern car everything is working, so I’m sure it has to do with tweaking the settings for an ‘02 7.3L. TF what protocol/settings are you using?

[@mrdayyumyum3712]

Thank you and God bless the family for leaving your posts up.

[@kevinfortney4101]

i took my truck to dealer it lasted a week 6.0 fixing myself now and thanks to this man Ron ......i miss him !!!!!!!!!! wish i could of called him ..

[@leftyloveschicken9523]

You have provided a fantastic video. Thank you for taking the time to do this.

[@MarzNet256]

Great how to. Just ordered adapter and downloaded torque pro. It looks pretty cool.

[@edwardpoff575]

Even a year later he's still a great help!

[@myytchannel6632]

RIP. Thanks for all your help on KZbin.

[@blackrockbrewing5141]

This man left a wealth of information. I just watched this video and I'll have to watch it 10 more times to try to understand everything he's talking about, what an amazing guy. I just bought my first 7.3L van and his info is a huge help. He will continue to help me and others for a long time to come. What a tribute to his life, thank-you Ron. James-

[@tomnorthcutt4754]

God bless this man he just saved me a ton of money on a scanner. This video is great. R.i.p god bless him and his family.

[@thoroughbread1975]

And I second that, enduro trucker ernie. Thanks to the family for leaving his material up.

[@danielrobertson3362]

Thanks for your legacy Ron. You are still helping me even after your gone. RIP bother.

[@jamesturner6949]

Go to his channel it's like the second to the last video where his son Explains It All it happened around 2017 I think bad car accident wasn't wearing seatbelt

[@myytchannel6632]

@@jamesturner6949 LORD!!! May he RIP!

[@jamesturner6949]

MyYTChannel Amen...a good man good father and helps so many people with his videos!

[@duncanb9177]

Wow this helped a lot, I was confused on why I couldn’t find some of the info/gauges I wanted, and have been using the app for a while, and now ik a lot more

[@thoroughbread1975]

Wow, it doesn't surprise me. People from all over the globe are being taught by Ron. May ✌️ be with you.

[@swashington942]

What a nice and helpful person. It's such a shame that bad things happen to good people.

[@hugomoratillo8453]

You are still the king. Thank you

[@twintibbsdiesel93]

Ron is the MAN and may his Family be blessed :)

[@RevoDSM]

I had no idea it could do all that. I’m amazed at how much I’m still learning from Ron. RIP you have always been such great help.

[@ruralsalt]

Thank you for your very helpful video. Such a clear instruction. Great

[@ipgile1850]

You are the best Ron.. Thank you

[@Jordan4Ibanez]

I don't even have a diesel, but this was certainly helpful with my Crown Vic. Thanks Ron!

[@DougHanchard]

We've gone from massive 70's era Sun scopes to a smart phone the size of a wallet and 1/000th of the price in less than 25 years. wow.... Great video.

[@NomadicSociety]

crazy cheap as dirt!

[@stevenpwilliams]

Really good job, sitting here testing it out and determined that the OBD Link LX makes the truck stall after a bit, not immediately.It will not start at that point, take the LX out and starts right away. Interesting..working through it.

[@sevenohnine]

I'd learned so much from this video. Thank you Ron! RIP my friend!

[@careerdog]

Did he die? What happened?

[@Pipeline-surfer1]

Thanks Ron, that was great, im downloading it now,

[@ScenEverywhere]

Great Review and Instruction Video

[@MrBrewerjaq]

I been using the RD9 adapter. It works great.

[@jamesogara2219]

Excellent tutorial!

[@ksanford1120]

Again and again I keep coming back to Ron's channel Thank You so very much for keeping the channel up and running

[@vicben1]

Thanks Ron!!! Eres la mera paipa, dondequiera que estes!!!

[@nickayivor8432]

🇺🇸 AND AROUND THE 🌎 MISS YOU REST IN PEACE DIESELTECHRON THANK YOU VERY MUCH FROM NICK AYIVOR FROM LONDON ENGLAND UK 🇬🇧

[@bigpicturesstudio]

that is amazing video, a real master class, thanks for that, top man

[@bbcobra04]

Yep. Set up torque pro app with the elm 327 mini plug in. Works great

[@brotherheed00]

Rip Ron.

[@themadnorseman4204]

This is fantastic. Thank you

[@johnwarfield7742]

Thank's Ron .... R.I.P.

[@lohikarhu734]

Kauai - Fabulous!

[@RogerSayers]

Howdy DTR, I know that this video was done 7 or so years ago but still find it very useful. If your still around, I have a couple questions for ya. Hope to hear back from you.

[@abrideforchrist4247]

Leave up Ron's video's..to help all the 6.0 owner's..

[@forbesy8568]

thank you worked for me

[@ericethier1839]

R.I.P buddy thank you 🤙

[@frankguerra3314]

I'm sorry to hear about his passing..

[@hiroshi.n]

Thank you Ron

[@ericlandry7520]

Great info thanks i was looking all over for something like this.

[@kawking14]

I'm late, but THANK YOU SIR!

[@Ldalesports]

Rest in peace bud

[@NomadicSociety]

wow sweet!

[@LawnWrangler323]

Very cool

[@ricardopena2545]

thank youfor your explictionappreciated

[@larryharless7804]

Awesome

[@sasatbuditeysi5]

THANKS a LOT.

[@scooter12368]

THANK YOU FOR VIDEO Will you either demonstrate for me or tell me how to set up i.e. 2 graphs comparing o2 sensors 1 and 2 (only have one bank) so i can see if i have a bad cat. i have looked endlessly directions for doing things on torque and kind find them. I would like to set up couple of graphs and save them prior to pairing up the phone. i don't know if i have bad cat or bad 02 downstream sensor on dodge with 90000 miles. wish there was a pamphlet or active forum to get on.

[@careylee5951]

Are you saying the OBD2 link that you are using in this video was glitching?

[@sonerdinc4831]

Thank you .

[@danhodgson9909]

Ron, what's the code for torque pro for an 05 F350 dually transmission temperature?

[@bosna916]

i bought one of these and well when i plugged it in it gave me a tbc fault thing what should i do i got pretty scarted so i unpluigged it but now the trucks all fine

[@salomongomezlazaro7140]

I Love you.

[@chetmyers7041]

9:34 Select "US Gallon, Not Imperial" if in USA. Great instructional video.

[@NNSVO]

can you check fuel injector pressure for each cylinder? My truck is not pulling any codes but feels like kinda like a misfire. I have a programmer that was hooked up to it but since I have started having problems I disconnected the programmer.

[@daveeasterling2683]

I have a 2019 f350 6.7 , my question is, will obd2 Bluetooth elm 327 connected to torque pro give false codes , was driving and check engine light comes on , at different times, goes off when torque pro is disconnected

[@phillipherder4982]

I followed your instructions to a 'tee', but I can't get the FICM Sync function to respond. Also, would you explain the 'boost' feature? It's tied into MAF somehow?? Why is it at zero unless accelerating?

[@bosna916]

+Phillip Herder well ur better then me haha when i plugged mine in my dash looked like a christmas tree saying tow haul was on 4x4 and a tbc fault anyone else or u get that problem ?

[@EKAutoTech]

Hi Ron, does the torque pro app also do the injector buzz test on the powerstrokes (97 7.3)?

[@DieselTechRon]

No buzz test or special test. Monitoring or pulling codes

[@cook4015]

If your looking to do buzz tests or cylinder tests download the Forscan app located in the Google Play Store it's a Ford specific app designed to run tests among other things. It's not free but the app is worth the cheap price for the benefits of the app.

[@toddburton8492]

What sending unit is he using the blue one all I can find is the blue elm 327 is that the one?

[@quadragin]

Great Video THANKS! We have a crank no start condition on a 2003 HPOP has been replaced once The ICP was replaced when the turbo was replaced a few months ago This started out as a Hot no start then got worse to a no start at all Air tested the oil system with no leaks We did find a hole in the IPR screen, cleaned IPR and replaced screen, then air tested it. Opening and closing with the OTC IPR tool Cranking we have the following FICM=52.0Volts (Aftermarket) FICM Sync=1 ICP Voltage = .5 IRP=83.5% HPOP=221PSI

[@DieselTechRon]

How high is the icp building? did you air leak it? Did you make sure the ipr valve is seating

[@quadragin]

+DieselTechRon ICP gets up to 0.5 Volts Cranking Air tested the oil system with the IPR Air fitting tool with no leaks We did find a hole in the IPR screen, cleaned IPR and replaced screen, then air tested it. Opening and closing with the OTC IPR control tool, it seemed to open and close just fine. We did get her started just now with Brake Clean and a new battery The new battery got our HPOP pressure up to 350psi once we shot the brake clean in she fired up while running HPOP=811psi IPR=32.1% ICP=1.1 Volts bumping the throttle the HPOP would climb up to 1200psi then fall as expected But the most she will make on the HPOP is 350+psi while cranking. I'm an Instrument and Controls technician so I have a question about the IPR QUESTION; Does the computer control and monitor the position of the IPR to display the % closed, or just send a voltage value to the solenoid to open or close the valve based on the voltage sent? Could the % be a false value? Meaning the computer thinks the IPR is 84% when really its hung up and not truly closing? Hoping this is not a bad HPOP, as we know it was replaced at some point in its life prior to us purchasing the truck, the former owner did the head studs, HPOP and aftermarket EGR cooler. We have replaced the FICM (Bullet Proof 52Volt), Garret Powermax Turbo, ICP sensor, and IPR screen twice Thanks for your advice

[@oliviapalmer2032]

*If you need good Torque Pro , working version, get here:* plus.google.com/101372446964255129776/posts/Q5JdRKpvVNq

[@cook4015]

Sounds like a faulty Cam Position Sensor(CPS) does your tachometer move when cranking? Always carry a spare CPS in your glovebox with a ratchet, 10mm socket and short extension sensor's typically under $30 only buy Ford Motorcraft sensors never knock off junk from auto part stores. It's a 10 minute sensor change laying down under the truck.

[@scotts3842]

Ron is there anyway to hook into your glow plug controller

[@lonestarflips3528]

Are you not selling them anymore? I cant seem to find the one that you are using.

[@EKAutoTech]

hi ron, i couldnt find the bluetooth adapter on your ebay store. can you provide a link to it?

[@sam111880]

curious if the app is updatable for feature vehicle specific code. The old styles used special circuit board keys you slide into the slots of the odb2 scan tool as well as cartilages now. The new ones must have a way to upgrade them thru an upgrade of apps or something ( i am guessing or are they going to be throw away after a certain period of time in future) . My other curiosity is if they have ELM327 bidirectional read/writters/flashers...like you can actually open vents , turn on compressors , turn on fans ,...etc as well as flash new wireless key codes to BCM , change engine performance values etc... :)

[@cook4015]

The app software is used to monitor stuff not do custom modifications per vehicle. You can do injector buzz tests and cylinder tests with the Forscan app it's a Ford specific app available in the Google Play Store.

[@larrybaker5864]

Ron with the Torque Pro app is there a way to do a buzz test on the injectors?

[@cook4015]

Forscan can be downloaded in the Google Play Store it's a Ford specific app you can do injector buzz tests as well as other tests within that app.

[@travisgaines3012]

Does the Dash Boss read fuel pressure and egt's with the kit when used with a 7.3 powerstroke? I have read they aren't compatible with the older trucks with regards to egt and fuel pressure.

[@cook4015]

7.3 Powerstroke Diesel's don't have factory fuel pressure sensors or EGT probes. You'll need to buy gauges to monitor them. Glowshift gauges are decent quality for the price and work well for me. There's better more expensive gauges on the market available.

[@rudycasillas8613]

Witch model Elm 327 mini Bluetooth for Andriod works for diesel 2006 F 250 sd ,6.0?

[@manacoo57]

I want to add high pressure oil pump reading for startup. How? please help

[@TheATVboy17]

What will the van Ficm internal voltage drop to?

[@kamalsingh4263]

how to connect obd with ecu and show us how to set up an profile

[@MrErichuizer]

Mine cannot connect with ECU, no matter which protocol...Also Ford, any ideas?

[@curtisdodds493]

can you change air fuel ratio with this app?

[@lonestarflips3528]

Hey Ron I have a question for you sir. I have 2003 a Ford F250 Super Duty 6.0 that has been having some issues of late. I get a good 15-1HR drive out of her when suddenly she starts loosing power and speed. It gets to the point where the whole truck starts to shake and finally gives out. After about 15Mins she'll turn right back on and do the same thing over again. I watched your videos about the Fuel Restriction that could be happening in the Fuel tank. I removed the Fuel Pump and no filter at the end! After a quick swim in the tank I pulled the filter out in pieces and headed over to Ford and purchased a new one. Now everything has been put back on and she starts up Beautifully but agian I get about 15-30Mins of solid power. My question is: Will this fix itself after a couple of runs or should I start looking elsewhere for the issue? Now this whole stopping and starting has been going on for a little over 1 year who knows how long the filter has been broken.... Thank you for your time! :)

[@keayrhyasen3071]

this sounds like a clogged fuel filter. happened to me with a brand new '97 Freightliner. fought it going across country until i put .25 cents of diesel in a new filter and swapped it out with the factory one. ran fine after that. the only other thing is there is something else floating around in your fuel tank that you didn't see. something that will get sucked down and block the inlets and when the truck shuts off and the siphon releases, it floats back up and away. THAT was another frustrating experience i had at a different job. Note to Mechanics: when you toss dye tablets into the tanks, please remove the plastic wrapping first. otherwise, they just float around inside the fuel cell.... grrr

[@justicebruno5249]

God bless

[@19jody72]

just downloaded this for when I get my truck back together. what is your ebay store name so I can buy the truck adapter

[@joatidwell]

Having much the same problems as Milton is having. The Ford Dealer would only tell me that the #8 injector coded as the problem, after reading Miltons fuel filter problem wondering how common it is for the filter to deteriorate and cause injector problems, or if I have an injector problem at all.

[@cook4015]

Fuel filters don't just deteriorate. Change them once a year or every 15k only use Ford Motorcraft specific ones. As for the injectors if you download the Forscan app from the Google Play Store you can do injector buzz tests, cylinder tests among other stuff. The Forscan app is a Ford specific app while it's not free the apps benefits are worth the price I think it's around $5 I don't recall though.

[@byronsanders7124]

is that your truck ron?

[@hotmail1929]

Hi. Mine shows Transmission temperature NOT transmission FLUID temperature. Is it the same?

[@sergiofraire5895]

Hi dieseltechron ...can you do a video for a I phone.....please..!!!!! And also if you can tell me what is the best scanner (or program for a laptop)........to work on diesel pickups ......I looking for one but no sure what to buy......thank you appreciate..!!!

[@cook4015]

Typically the best OBD2 reader for a laptop would be a wifi one. Amazon has the ELM327 available with USB connection for laptops.

[@pignanellifabio4646]

How i can select One of the not green functions?

[@rudycasillas8613]

What should I read on my Ficm Sync? I am reading .6 2006 F250 sd 6.0.

[@kevinhenson942]

Rip Ron