Setting water level for the BUNN CW series

Setting water level for the BUNN CW series

[@tdog5955]

TY Paul-yur Vid & Experience saved us from not replacing with new one-GREAT JOB👍👍👍

[@breakaway3004]

Perfect! Thanks for the easy to follow instructions.

[@lucindasanders5694]

So easy to understand and follow. Thank you!

[@MrsCapps-qx7lm]

Thank you so much!

[@m2lik911]

Thank you , شكرا لك 🙏

[@sunyoungg5634]

Great help thanks - if I find the pot level is decreasing I lift the top cover and clear the scale that's restricting the cold water inlet spout.

[@sambone5407]

Great video. Thanks for sharing

[@pfeels]

You're welcome

[@sinofprideescanor6619]

Your tha man 👨🙌💪

[@br0k3nbl4nk3t]

Neat! Just not ideal for specialty coffee where we weigh everything

[@johnstupp3452]

Thank you so much

[@lydiaedwardsadams6692]

Thank you sir!!!

[@pfeels]

You're welcome

[@juangamez6034]

I’ve spent over 5 hours to try to get it consistent and it never stays at the quantity I want it to pour into the decanter.

[@pfeels]

Try calling Bunn technical support. You should be able to get their number off the internet. If it won't hold then it might be a board problem.

[@jazzykeys872]

awesome video. Mine was filling to much. Backed it off. Perfect now. However. It constantly drips off and on when its just resting. Pretty soon its full again by itself and spilling over if no ones watching after it. Any idea whats causing this?? Do you have a video for that? 😮😬😕

[@pfeels]

I don't have a video but there's two things that can cause the water to constantly drip. The fill solenoid is not closing all the way and needs to be replaced or the main coil has a hole in it. Take the top off the brewer and you'll see a pan. water comes into the pan by the small tube on the back left. If water is dripping out of that then the fill solenoid needs replacing, if the water isn't coming from there and still dripping out then the coil is gone and that's a job for a technician but more often then not we just throw out the unit.

[@jazzykeys872]

@@pfeels Thank you.👍👌🙏

[@darinv3502]

I have a similar machine, but the water overflows from the clear-cut grommet where the sensor is inserted. I can't figure out how to stop it

[@pfeels]

Sounds like a bad grommet (Part #07073.0001) You'll have to cut it with a razor from the center out so you can fit it over the thin tubing. It may already have the slit. Water over fills the tank in order to push it to the brew basket so the grommet needs to be sealed.

Sir can i put hot water for American coffee in this machine?

[@pfeels]

They require cold water

[@jazzykeys872]

I just installed a new one. But I have no Idea how to check the water pressure. It says that if it is at 90 psi it should be reduced to 50 psi? So...its working great but i hope i dont screw something up because I dont know how to check the water pressure..😢🤔😬

[@pfeels]

There's a restrictor in the fill valve so you should be fine.

[@xCaligula]

When in the set position does it reset the saved timer? I’m trying to decrease the levels

[@pfeels]

It doesn't reset the timer. To decrease the amount check out 2:09 of the video.

[@shanefoster.]

Ok I have one that pump water how do I fix please

[@pfeels]

I don't know what you mean by pump water.

[@lawsitkit1998]

「front」「 rear」 is what key？have any function？

[@pfeels]

I'm not sure what you're asking

[@iandouglas2872]

there is a much easier way to do it I do it almost every day

[@pfeels]

You shouldn't have to do it more than once a year but video hope you do it and send me a link. [e-mail]

[@iandouglas2872]

@@pfeels what I do is connect a hose to where the water comes in to the receiving pan, hit the start button till you hear the 3 clicks and turn the machine off when you get to the desired volume. It should stay at that level for a long time. oh well that's what I do.

[@pfeels]

@@iandouglas2872 I think that's the way the Bunn tech taught my guys, I'll have to check but again I'm not sure why you have to do it every day. It should hold.

[@iandouglas2872]

@@pfeels 300 machines