Settings for JS MIDI Accordion

EXPRESSION SETUP
Find "Expression Setup" in "Global Setup".
Enter Main Menu [BackSpace] + [NumLock]
Use [+] / [-] then [ENTER].
Turn "Mode" to "Juzzi Accordion"
"Curve To Audio" must be "FIXED".
"Speed Smooth" must be "30".
"Min Express. Limit" shows what the sampler's minimum audio level must be when MIDI is on "0".(It can be between "OFF" - "127" Default is "OFF")
MIDI MASTER VOLUME
Find "MIDI M.Volume" in "Global Setup" with [+] / [-].
For JS MIDI Accordion choose "GM Sysex".
For MTech, Roland or other choose "C.Change 7".
MIDI MASTER TRANSPOSE
Find "MIDI M.Transp" in "Global Setup".[BackSpace] + [NumLock].
Settings must be like this:
"Receive MT Sysex - "YES"
"Apply To In Notes"- "NO"
"Apply To In Scale"- "NO"
If its needed browse parameters by [ENTER] and change values by [+] / [-]
SETTINGS WITHOUT BASS AND CHORDS (only right hand)
When we use MIDI Accordion with "no bass"- Upper 2 always plays Terca!!!.
Both Upper 1 and Upper 2 use MIDI channel 1.
In "Global Setup" find "Inputs And Channels"
SETTINGS FOR BASS AND CHORDS (with left hand)
When we use BASS Upper 2 plays Bass and Accords. TERCA is not avaiable!!!
Upper 2 use MIDI channel 2.
After all changes you need to "Save Global"!!!
SETTINGS FOR Upper 2 TERCA / BASS
CHOOSE SOUND FOR UPPER 2(available only from sampler)
[ENTER] + [0]
by [ENTER] we reach the SOUND of Upper 2
change SOUND by [+] / [-].
CHANGE VOLUME of Upper 2 (from sampler or Accordion)
We can do this from Accordion MIDI System, when panel button
[Master Transp] is active, and then pressing [+] / [-].
TRANSPOSE OF UPPER 2 (available only from sampler)
Open transpose fast menu by [ENTER] + [3]
Use [ENTER] to move, and change values by [+] / [-].
Upper 2 Transpose cannot be controlled by the MIDI Accordion!!!
UPPER 2 AUTO Off (available only from sampler)
We can find this parameter in "TERCA Parameter" menu.
Open TERCA parameter menu with [NumLock] + [*]
Browse parameters by [ENTER]. Change values by [+] / [-]. This parameter determines what Upper 2 should do
when TERCA is turned off.
If parameter is "NO", when terca is switched OFF, Upper 2 will continue playing in unison.
If parameter is "YES", when terca is switched OFF, Upper 2 will stop playing.
From MIDI Accordion panel, we can direct control over:
TERCA On/Off ,TERCA Scan, TERCA Hold, TERCA Special Note On/Off
All this parameters are saved in sampler, as part of the PRESET.