SETUP A MULTI-POS-SWITCH TUTORIAL | EDGETX | MT12 [EN]

#radiomaster #mt12 #tutorial The possibilities the EdgeTX operating system gives you when it comes to programming and setting up your model are almost endless. In this video I will show a way how you can use one of the Trim-Switches for example to implement a multi-position-switch (in this example it is a 4-pos-switch).
Link to the cheat sheet:
docs.google.co...
If you like my work, please hit the like and subscribe buttons and feel free to buy me a coffee:
www.buymeacoff...

[@willipreugschat]

Interessante Logik, nach dem Einschalten den Multi-Switch in eine vorgegebene Position zu bringen. Daumen hoch!

[@arminrc]

Danke für den Kommentar! Die Logik ist in diesem Fall notwendig, wenngleich sie auch nicht "vollständig" ist (aber definitiv besser als nichts). 😉

[@Pj-Fpv.]

Hi, Armin My compliments for your English language and nature the great knowledge you have is very educational and useful, keep it up greetings from the Netherlands Pascal

[@arminrc]

Thank you very much for this great comment! It is not always that easy to do such videos in a foreign language, so I am glad that it is ok for you.

[@jleftbrane]

Thank you!! I look forward to see what you come up with ❤

[@arminrc]

Solution found. Making a video, trying to bring it online within the next days. Hope you can wait 😀

[@henrysrcgarage5210]

Awesome video!! Just yet another way to do something with edgeTX. Its such a robust system.

[@arminrc]

Thanks for watching and the great comment! Many roads lead to Rome 😉

[@jleftbrane]

Thanks for making these videos. It seems like you really know how to program these! I am struggling with setting up 4 wheel steer modes. I would like the SA switch to be > front wheel steer in the outward position. | 4WS in the middle position. < crab in the inward position And P1 or P2 for rear steer So far I am failing

[@arminrc]

Thanks for watching and the comment! I would really like to help you out on this. Can you please elaborate what you mean with "P1 or P2 for rear steer"? Do you mean the percentage of the rear axes steering when in 4WS and/or crab mode? Or do you mean you want to control the rear axis with P1 for examplen when in front wheel steering mode?

[@jleftbrane]

Thanks for your reply. And I would really appreciate the help. When crawling I would like to control my rear steer independently, using P1 or p2 knob when it's in front steer mode

[@jleftbrane]

So basically 3 steering modes with the S.A. switch and rear steer on a P knob. Because if you are only rear steering you don't really need it on a mode

[@arminrc]

Thanks for the info. Looking into it. Stay tuned...

[@arminrc]

Video is ready and will be online this evening (Berlin time).

[@michaelrajca6043]

this newbie is asking how to set up my 3 position toggle switch to run a 3 sp transmission. i just want it for the midddle position to be 0 and the two outside positions -100 and + 100. i know i have to setend points . i know how to do that by changing weight. i just want to set my 3 position toggle on ch3 and for it to go from +100 to 0 to -100. what is the correct way?

[@arminrc]

I don't have the MT12 with me so I have to do it out of memory. Hope it is right 😉 To implement your use case go to the Mixes page and add a mix for channel 3. Edit this mix and set Source to MAX, Weight to +100 and Switch to SA down (if I remember correctly). Now exit the edit page, copy the mix you just created (short press on the roller and one down) and edit it. Source remains at MAX, Weight goes to 0 and Switch to SA neutral. Now again, exit the edit, copy that mix and edit it. Source stays at MAX, Weight goes now to -100 and Switch to SA up. It is done! In the end you must have three mixes for CH3 and SA controls what mix is active. Does it work?

[@michaelrajca6043]

@@arminrc thank you , i will try later. yes it worked thank you. if you dont use this radio often you forget alot of things especially for a new user