For putting the velcro on the plastic, I peeled off a piece of the paper at the top center and bottom nose corners so three places in total. Got them lined up and then pulled the rest off as I laid it down. The hardest part for me was pushing with like 600 lb of force to snap the faceplate onto the unit itself.
@OneManUnmanned9 ай бұрын
Thats a good technique..Yeah, you’re right, the faceplate does require a lot of force to snap in.
@MJ-bj1gn Жыл бұрын
A year aho I wanted to upgrade from my box goggles, so I tried on a pair of fatshark style goggles and I had the same issue as you have, a double picture. Adjusting the ipd and focus just did nothing. So I thought I would habe to use box goggles forever. A year later I tried on the dji goggles 2 and I had the same problem, but after 5-10min of using them, I suddenly got a perfect image. So as a conclusion I‘d say that it just takes time to adjust to your pair of goggles, no matter the brand btw Nice video Thomas 🚀👍
@OneManUnmanned Жыл бұрын
Thanks alot MJ... You took the words outta my mouth. I'm glad I wasn't the only one with that problem. I had my wife try them, and she had the same problem. After a few minutes they worked for her. Then using her settings, I put them back on and saw a single combined image.
@MJ-bj1gn Жыл бұрын
@@OneManUnmanned That's so nice to hear!
@danspratt2 Жыл бұрын
I to had the double image issue, i thought my goggles were faulty for about 10 minutes :P I solved it by turning the diopter knobs all the way one way to maximum out of focus, and the image just joined in that moment.
@miquelmarti6537 Жыл бұрын
I also got double images. Then I noticed that the face plate wasn't fully pushed into the googles. I guess they send it like that so you can replace the plate with the other one in case it's needed. I just pushed the included one into the googles body and it made a loud click. After readjusting diopters and ipd, no more double image.
@sparkequinox Жыл бұрын
hero. Still seeing blurry at first but this was the same for me.
@miquelmarti6537 Жыл бұрын
@@sparkequinox Read the instructions where it says how to properly adjust focus and IPD using the Focus chart. That did it for me. Also try to focus on the 4:3 area only. Hope it helps.
@sparkequinox Жыл бұрын
@@miquelmarti6537 it was the not being clipped in then took about 10 minutes for my brain to adjust its perfect now. Looking down as if the display was in my hands like a phone made my brain adjust very quickly. It's fun having your brain fall in/out at the start merging the displays.
@miquelmarti6537 Жыл бұрын
@@sparkequinox That sounds like you still need to tweak the ipd-focus. Try to move them ramdonly while watching DVR? The menu is not very good for that if you already have some astigmatism. Your brain shouldn't have to readjust.
@sparkequinox Жыл бұрын
@@miquelmarti6537 yeah it was definitely because I was only using the menu to tweak it. Didn't realise I needed the adapter for my fusion RX and only just ordered a digital cam system today. Uploaded some footage onto the SD and it's working well now.
@opposedforces Жыл бұрын
Fantastic video bro! You did a splendid job of covering all the steps! I can't wait to get my new goggles this week. I will be reviewing your video again once I have them in hand so I can follow along. Thank you!
@OneManUnmanned Жыл бұрын
Thanks, I appreciate that. I'm glad the video helped.. You'll love these goggles!
@stevensbox962510 ай бұрын
Really beginning to enjoy your vids. Bonne chance mon frère haïtien
@OneManUnmanned10 ай бұрын
merci
@dadpoolfpv4 ай бұрын
Thanks for the video, bro. Very informative. I just purchased my first HDZero system after flying DJI/Runcamlink for over a year. I'm scared and excited, and also I'm happy to join the team. Keep sending!
@OneManUnmanned2 ай бұрын
Glad it helped
@marcochierico5150Ай бұрын
Thank you so much for this video. It's a shame you can't add the f2 and f4 too.
@slogan910511 ай бұрын
nice work
@OneManUnmanned11 ай бұрын
Thanks!
@richdavis9789 Жыл бұрын
Bro, just stumbled upon your channel... good stuff!!! I can't wait to get my goggles. Order number 150XX yeah, it'll be awhile...haha
@OneManUnmanned Жыл бұрын
Haha, Thanks man. Yeah, these goggles are great. You'll love them!
@JDDupuy Жыл бұрын
Nice review. Price back up to $599.00. Might be a hard sell in this economy. Still waiting on the 90FPS camera to ship. Mine will be here Tuesday. Nice follow-up review.
@OneManUnmanned Жыл бұрын
Thanks... It looks like we're both in the same boat. I'm waiting for my 90fps cam as well, but don't know when it'll get here. The 100 dollars off was a good deal.
@JDDupuy Жыл бұрын
@@OneManUnmanned I got shipping notification on my cameras this morning. Curious to test them.
@amarmot-f2q11 күн бұрын
For me the stickum holding these down to the brackets keeps becoming unstuck. Any suggestions?
@AaronBrand4 ай бұрын
I’m looking for basic info, like what size/speed micro sd card should I use. What amp charger should I plug it into.
@rocketrob3324 Жыл бұрын
Thank you for this effort!
@OneManUnmanned Жыл бұрын
Not a problem.. Thank you!
@emmanuelcheveau4891Ай бұрын
Hi, I need to update the firmware of my HDZERO goggles. Can I use an SD card of 8 Gb ??
@QsilverFpv Жыл бұрын
I did the same thing but lumineer is false advertising two antennas
@davidlondon3111 Жыл бұрын
Are these your first goggles with a screen per eye? I had the issue with the screens not merging when I first moved from box to two screen goggles. I found that sometimes just looking at the top of the screens would help them merge. It would initially take time - maybe a minute which might be a problem with a quad so maybe just practise on simulator until you train your brain. There’s nothing wrong with you or the goggles- your brain just needs to learn.
@OneManUnmanned Жыл бұрын
No, I've been using my DJI goggles V2 for some time now. I do agree, my eyes and mind had to adjust to the new optics.
@dknox1911 Жыл бұрын
What the hell, I'm seeing the same double image. I'm coming from box goggles and can't image flying my quad like this. Do you recommend anything or just give it time?
@OneManUnmanned Жыл бұрын
You just have to give it time. It took my eyes and brain 3 days to adjust to the new screens and optics. Just keep trying multiple times per day. One day it will just happen.
@winghamFPV Жыл бұрын
@@dknox1911 Had/ Have the same issue. One thing that helped is the Faceplate that comes already on googles is not fully snapped on.
@matthijsborgdorff7766 Жыл бұрын
Try to focus a little bit farther away and images will merge.
@juliusen73367 ай бұрын
does anyone know if this can be bought in europe? i can't find any link where i don't pay like about 750€ to 850€ (that is 815$ to 920$ which is bonkers) just for the goggles alone...
@Ricpow80AkaNagamooto Жыл бұрын
How did you solve your double image issue?
@OneManUnmanned Жыл бұрын
My eyes and brain has to adapt to the goggles. Short story long, I had my wife try then on, and her what she saw. She saw a double image like I saw. I let her play with the settings( focus and IPD) for her vision, and eventually she saw a single image. I told her not to touch the settings.. I tried them on again, and saw one combined image(it was blury since it was her prescription). I then readjusted the settings for my prescription, and it was crystal clear with one image. My brain was just not used to the optics at first, or I was trying too hard to see a single image.
@Ricpow80AkaNagamooto Жыл бұрын
@@OneManUnmanned Cool - thanks for explaining. I open mine today and am looking forward to trying them out for the first time!
@ludofevrier5593 Жыл бұрын
@@OneManUnmanned me to i have this problème
@SunriseWaterMedia Жыл бұрын
I'll check back here once mine ship... If they ever do. 😅
@OneManUnmanned Жыл бұрын
Haha.. They will eventually. How's your finger? Hopefully it's doing better.
@SunriseWaterMedia Жыл бұрын
@@OneManUnmanned Ha ha, you saw that video! 😂 My finger is pretty much healed, but still numb to touch. Thanks for asking, Thomas. 👊
@theringoffire3228 Жыл бұрын
Lol I literally just got mine. That's why I'm watching this
@SunriseWaterMedia Жыл бұрын
All right, finally starting to set mine up. First question I have is, where can I buy third party foam? The nose bridge area of the foam is quite thin and tricky to orient so that the plastic doesn't dig into the bridge of my nose.
@OneManUnmanned Жыл бұрын
I think we somewhat all have that problem. There are no official replacement foam for the HD0 Goggles, but the concensus is the Skyzone O4x foam(fake leather or foam) did a great job. Congrats on receiving the goggles.
@MikeCarr075 ай бұрын
What are your thoughts on the Stubby antennas?
@OneManUnmanned5 ай бұрын
Meh.. They are OK. Its a good compromise of performance and portability. I really need the goggles to be compact. I’m sure you could get better performance with longer antennas, but I have not tested them.
@MikeCarr075 ай бұрын
@@OneManUnmanned Is HDZero your main driver or DJI?
@ludofevrier5593 Жыл бұрын
Thanks for this👌 the skyzone rapidmix analogue vtx works with hdzero Goggle ?
@elxero2189 Жыл бұрын
Those aren't really patches tho
@OneManUnmanned Жыл бұрын
What are they?
@Vousie11 ай бұрын
@@OneManUnmanned I seem to recall someone took one of these apart, and there's actually a ground plane with two wires forming a little "x" mounted over it, hence why the antennas aren't a flat PCB like normal patches. They're still directional like patches, but they actually have better performance due to having air between the antenna and the ground plane instead of using the PCB material.