SEVENT9 // Horn Ported To Cruise Control

Hi everyone,
It's been a while since I updated my thread which I really should get on but today I thought I'd post what I feel is a smart solution for the horn button if you install a quick release hub. I installed Rennline's Quick Release which does not accommodate a horn button so my solve was to wire it instead to the deleted cruise control switch. It works both in the up and down position and being a nice stiff switch won't get knocked accidentally. A nice solution to maintain the integrality of the cab without adding a new unsightly button to the dash.

[@ChefTef]

I currently have this exact problem, do you have a video on how you wired it?

[@79.outlaw]

teflonjawn - stupidly I didn’t take one as it was so quick to do. Just pull the wires from the pin connector on the cruise control stalk. You’ll need to remove the steering hub and casing to access the horn wiring and then splice together the brown and yellow wires to one horn wire and the white wire to the horn and you’re done. Nice and easy! ;)

[@ChefTef]

@@79.outlaw ok hopefully it'll be as easy for me. Thanks for the info