Sew Smarter With Janome: How To Perfect Your 1/4" Seam

Janome's National Spokesperson Kimberly Einmo shows us how to perfect your 1/4" seams! Kimberly will review the Janome 1/4" piecing feet and how to conquer the elusive scant 1/4" seam once and for all!
Follow us:
Facebook: / janomesewingmachines
Instagram: / janomeamerica
TikTok: / janomeamerica
Pinterest: / janomeamerica
Janome Sewing Classroom FB Group: groups/Janom...
Continental Club FB Group: groups/43917...
Janome Artistic Digitizer FB Group: groups/artis...

[@dianeestep8775]

This is a great tutorial. I never could understand the scant. Thank you so much .

[@moirae.anderson7079]

I love my HP foot and use it all the time for piecing, however…I started making a Dresden plate quilt the other day and pressed my seams open, in order to obtain a flatter plate, but, to my dismay, the plate would not lie flat at all. Realising that my seam was too scant, I had to test another plate using my normal “O” or 1/4” foot and then pressed to the side. This time my plate was perfect so “ once in a blue moon” a scant 1/4” is not always the perfect choice and one has to be willing and aware to test it out! Thank you for such excellent video content☺️😊I always really enjoy your clear, concise teaching.

[@juanitamayes6329]

Thank you for sharing this .... I love making dresden plates

[@keinmo]

Good to know!

[@jeanhart3178]

Thanks for this explanation- I will be saving all of this great information ! And can't wait to try making all my samples and getting the 1/4" seam accurate !

[@JanomeJAI]

Glad it was helpful and happy sewing!

[@dianemckoon7808]

That was great! Running to call and order my new feet !

[@sherrillstrassburg9157]

Thank you so much for this video! I struggle so much with my scant 1/4" on my M7. I cannot wait to try this tomorrow!!! This was a great video! ❤

[@danieduchesne9066]

The HP needle plate and foot is one of my favorite feature on my 6700P. When I bought it in 2018, i was debating between a straight stitch and a « normal » machine! The 6700P has it all!

[@JanomeJAI]

We love the HP system too, and are so happy to hear you are happy!

[@carollaforet1852]

My Janome dealer is away until next week so I have to wait until then to order my 6700. Can't wait to get it and use the HP needle plate.

[@JanomeJAI]

You will not be disappointed!

[@SheriColby]

I am a quilter "want to be"! Trying to get started on my learning journey. Very informative video, answered many questions I have pondered.

[@keinmo]

You're in the right place! So glad you're beginning your journey into quilting. You won't regret it!

[@nancypitzer3923]

Hi Kimberly! So great to see you again! You are my FAVORITE teacher - clear, thorough and understandable! I look forward to each video. Thank you for sharing!

[@keinmo]

Thank you so much, Nancy!

[@bettys375]

Your tutorial & voice is so mesmerizing and educational. Your website popped up on my laptop while watching U Tube. My sewing table crashed & destroyed my Janome 9900 two years ago. I loved my Janome & tried not to cry listening to your presentation. I had to settle for a Bothers and it is not in the same classification. I am retired on a fixed budget or I would have purchased another Janome. Anyone reading this, if you have funds, buy a Janome, engineering is Mercedes classification. ❤

[@keinmo]

Thank you for your lovely comment. You are so sweet with such kind words. I'm praying that another Janome finds it's way to you soon! ;-)

[@carollaforet1852]

I used to buy Brothers but since getting my first Janome 8 years ago I will only buy Janome. I now own 3 of them and love every one. Great machines.

[@jackiedewine9718]

Great tutorial. Makes so much sense! I do so much better when I understand the “why”. Thank you! 😊

[@keinmo]

I agree -- and I always like to tell people "why" -- it makes it so much easier to understand.

[@lindaburgess]

Great video and I’m obsessed with the cupboards behind you and all that lovely fabric 🥰

[@keinmo]

Awwwwwww thank you!

[@debjacobson9800]

Thank you Kimberly 🪡🧵

[@carollaforet1852]

What an excellent tutorial. I learned so much and you helped me make up my mind as to which Janome I am going to buy. Thank you so much.

[@JanomeJAI]

We're so happy to hear this, and we're always here to help!

[@carollaforet1852]

@@JanomeJAI Should have explained that I already have 2 other Janomes one of which is the 6600. I have been undecided as to whether to get the 6700 or a base model for backup. I am going with the 6700 (thanks to your tutorial) and my 6600, an excellent machine btw, is going to be my backup machine. Can't wait to get my 6700 delivered. Thanks again.

[@JanomeJAI]

Congrats, and you will not be disappointed. The MC6700P is a workhorse!

[@helenlineham8515]

Late catching up with your video, I use the HP foot and plate on my 6700p for all my piecing, it's a game changer. Thank you for a great video.

[@colleenadair9904]

Thank you so much, this has been most helpful! I’ve been a Janome user for an embarrassing amount of time but hadn’t ever thought to actually move the needle position up to 9 to achieve that ‘scant’ seam. I’ve usually just ‘eye balled’ the fabric by moving it slightly left on the O foot edge. Just when you think you know all there is to know about how to achieve the perfect scant seam, there’s still more to learn.

[@daniseshields9423]

Wonderful explanation for the scan 1/4. I enjoy all your tutorials. Thank you.

[@keinmo]

Thank you very much!

[@deedodson9661]

This was fantastic! I have been struggling with consistent 1/4 inch seam. Appreciate you doing this video….. keep them coming please!

[@keinmo]

I surely will! Thank YOU for taking time to comment here!

[@jshipard54]

Great helpful tutorial Kimberly. Thank you 🇦🇺

[@keinmo]

You are so very welcome!

[@NonnasScraps]

This was fantastic! I love, love, love your explanation of how to get a scant 1/4". And then to add to it with the different feet. I am definitely going to check out the (1) that I do not have! I love my Janome M 17 so much! A lot to learn, but what a beautiful machine to have to learn it on! Thank you so much.

[@keinmo]

You are so welcome! I'm very happy you found this helpful!

[@sandrajahn8071]

You’re amazing! I’ve really missed your Facebook live presentations and “Done before dinner” projects.

[@keinmo]

I've got a new Done Before Dinner project coming THIS WEDNESDAY! Stay tuned.....

[@kellymitchell2286]

Great tutorial.

[@user-en6es8rm2z]

Very helpful video! I’m a beginning quilter and I’ve been struggling with that 1/4 inch seam.

[@susandawson8527]

Thanks will try this

[@Quiltgirl10]

I have the Janome 9450 (about 2 yrs) and tried the HP2 foot and plate before without success. Watching your video, I will try using the HP2 foot and plate again to get that perfect 1/4" seam. Thank you for sharing! I enjoy watching your videos, I learn so much.

[@keinmo]

If you'll give the HP foot and plate system a chance and practice with it, I think it may become your favorite method for piecing. However, the beauty of all the different presser feet from Janome is that they have a style and method that will make everyone feel comfortable!

[@nancyclark2964]

Where can I get a cloth guide for my 9450? Loved your video. So informative!

[@sherryfaires7931]

I have the 15000. I can definitely use these suggestions! Most of these I have never heard of! Thank you very much!

[@keinmo]

Fabulous!

[@BridgeMD]

Loved this and learned so much, thank you!

[@keinmo]

You are so welcome! Thank you for commenting....

[@treasuresnownthen]

Thank you! I recently acquired a Skyline5 machine and cant wait to test this out.

[@keinmo]

You're going to be amazed and oh, so happy!

[@zogzorg6126]

thankyou ,great detail

[@rochellenowik9875]

That was very informative. I did not have a very good instructor when I bought my Skyline S9 (5 months ago) so it has been great to watch these videos and get up to speed.

[@keinmo]

Everyone at Janome feels passionately about providing as much education for sewing and quilting applications as possible! So glad I could help today!

[@carriejetton966]

Great video, thank you for all the information. I have a Janome 9400 and I love using the HP foot for piecing. Also love to use the HP2 foot for binding.

[@keinmo]

The HP2 foot is also awesome! I use it a lot, too.

[@jennifergoodwin8680]

This has been so helpful. Although I use some of these tips and tricks, I did learn something new.

[@keinmo]

Wonderful!

[@carolynquinlan5612]

Great video. Good to see you. I agree with you about the HP foot. I had put together rail fence strips, only to find out they were too narrow when I went to cut the 6 1/2 squares. Switched to the HP foot and sure enough, the strips were perfect. Keep these informative videos coming. Thank you.

[@keinmo]

So glad you found great success with the HP foot and plate system!

[@billiedickinson6661]

GREAT show!!! learned a lot.

[@keinmo]

I'm so glad!

[@francesmanktelow577]

Thank you sooo much. This video has just solved many quilting mysteries for me and my 6700P!

[@user-fw4pt8lu8i]

Thank you. Such a game changer

[@keinmo]

This makes me so happy!

[@debbieroot4618]

What setting for a 7mm. Foot on my 6600?

[@kathythorene5873]

Thank you this has help.😊

[@bobriddle1965]

Thank you. Your explanation and demonstrations were outstanding. You articulated the reasons and results of using a variety of feet and machine settings in a clear, direct and easily understood manner. I hope to see you at Linda Z’s very soon. I’m enjoying using your rulers and instructions I received there and have finished one of the 2 projects we worked on!

[@keinmo]

What high praise! THANK YOU! I love Linda Z's and would LOVE to come back again!

[@kolschmadche7245]

Thank you so much for this wonderful Explanations! I’m having big problems with my MC8200QCP! But now I will try your tips! 😊

[@keinmo]

Take your time, experiment, and you'll soon see success with your scant 1/4" seam allowance!

[@gramxl0]

Thank you. That was very informative 😊

[@keinmo]

I'm glad this information helps!

[@carleenbodary1661]

Thank you so much! I had no idea about the HP plate! Guess what I'm doing tomorrow? You are so helpful and video was professionally demonstrated.

[@keinmo]

Yippee! Your comment makes me very happy!

[@cherylanon5791]

I like to piece with the straight stitch needle plate, so I use the Janome foot (didn't come with machine) with the black tab on it, simply abut the fabric along the black tab and it's a perfect scant 1/4 inch, with the straight stitch needle plate.

[@keinmo]

So glad you have a solution that works for you!

[@cindifairchild1846]

What is the name or letter of the foot you bought and like? I am really struggling with the scant 1/4”.

[@roxannewaddell3830]

Totally understanding this concept, thank you for the information. This will make a huge improvement on my piecing.

[@keinmo]

I'm so glad!

[@morebaloney1539]

Very good explanation of the feet.

[@sharonhamilton7298]

Excellent video.

[@keinmo]

Thank you so much!

[@RebeccaRohrmann1357]

Wow. Had no idea on the hp foot. Sweet.

[@brendagriffin6437]

I'm an experienced sewer/quilter. I have a 3 Janome machines and only one of them has a true "scant " 1/4 inch. My Skyline 5, and I've done the Auto Mode 1 06 for 1/4 inch and the 8.3 default, then moved it to the 9.0. It is still not a scant 1/4", it's larger. I've been playing with this for 9 months! My MC 4800 I throw on the 1/4" foot, move my needle over to 4.0 (1 Position from default) and BANG, it's perfect. On my Skyline 5, I now have to use seam guide tapes/ledges, then when I need a new bobbin, I have to remove and start this aligning process over. I sew every day. At the end of the day I wish I could save my settings in memory so I can just turn it on and my own personal default is there. Maybe that feature should be in the next upgrade, a personal user setting.

[@JanomeJAI]

Thank you for your comment. On your S5, you can save pattern combinations. We do have a feature called Favorite Stitch on some Janome models where you can set your stitch length and needle position and recall it when needed. For the Skyline series, this is on the S7 and S9.

[@peggyyoung1839]

Can the HP foot work on a 6600 machine?

[@JanomeJAI]

We are sorry, but the HP foot and plate are not compatible with the MC6600P

[@user-uz8jx2rc5b]

such a fantastic tutorial. I have a MC 6600 an old Janome and I dont imagine I could use any of these feet with it. I have the O foot with the guide. I was pleased to see you share that you use a 2.4 or 2.5 length stitch, as when I piece using anything else the stitches are extremely uneven. I am from New Zealand, and follow these Janome tutorials all the time. thank you.

[@keinmo]

I'm so glad to hear you're from New Zealand! How exciting!! Glad you stopped by to watch this video!

[@janiceprice7403]

Thank you!

[@Carylanne927]

I'm on a 12000, and for 10+ years I've used the 8.7 and 1.80 and still haven't perfected the sa. OMG what a thrill to see you, Kimberly, explain the Janome way. TY TY TY need to find the book to set this default.

[@keinmo]

I'm SO happy this video was helpful to you!!! You've made my day!

[@apylinski]

This really helped me a lot! The Janome manual is horrible and very hard to figure out! Videos really help. Thank you.

[@keinmo]

I am very glad this helped!

[@skiptonius5346]

Most of the time, consistency is better than perfection. 🤷🏽‍♀️

[@lindahalyday6306]

Thank you

[@tallgail79]

This video was great. I didn't know about the marking ms on the machine.

[@keinmo]

I'm so happy I was able to help show you some new things today!

[@maryscarnecchia984]

The M7 is amazing and that HP2 foot!

[@keinmo]

I agree!

[@shariz2998]

The HP foot is my favorite for many piecing projects.

[@keinmo]

It's mine, too! For obvious reasons.... ;-)

[@mlhoffa]

I have the M 7 and my faithful 8900. The HP foot is interchangeable with the 8900…and yes it’s a game changer for the scant 1/4”. I’ve picked up more info from this video - thank you 😊

[@keinmo]

Great to hear!

[@cherylfitzsimons8720]

Thank you for a great video. I need to buy the HP foot and plate and the cloth guide.

[@sarahbloom1045]

I find using the HP foot works for me to get the stitch.

[@keinmo]

Wonderful to hear, Sarah!

[@WandaHunter-hv9uo]

Great tutorial! How to save favorite stitch?

[@Cassandra-..-]

My block lotto blocks thank you! I’ve been fighting my 9450’s hp plate / scant quarter foot combo because it looked too small. 🤦‍♀️ Now that you’ve provided the zoomed-in ruler views, I know my mistake. Thank you!

[@keinmo]

Fantastic news!

[@ingridhunt7841]

8.6 is my sweet spot and 2.0 stitch length

[@keinmo]

SUPER! So glad to hear you have defined your personal sweet spot.

[@randidaeger157]

Love the color of your mat. Where can i get one?

[@keinmo]

I found mine at JoAnn's.

[@WandaHunter-hv9uo]

Great Tutorial! How to save favorite stitch? Thanks

[@JanomeJAI]

Wanda, we have a video tutorial on this Favorite Stitch function here: kzbin.info/www/bejne/fGmraqutpM-de6csi=J55TdNPK7vyhPYhZ.

[@randidaeger157]

Why doesn’t Janome tell us this in the instructions? Or, better yet…..why not make a REAL scant quarter inch foot? I have a MC 7700QPC and love it! I can move my needle but nowhere does it tell me a number. So how do I know what needle position 9.0 looks like?

[@keinmo]

Practice. Try the techniques I showed where you draw a scant 1/4" line on stabilized cotton fabric. Then put it under your presser foot and align with the right side of your presser foot, if possible. Having painters tape to help mark your needle plate will be extra helpful, too!

[@Lsutube963]

I totally agree! I have a Continental M17 and hands down I love it more than the other three major brands I have owned. But while I think Janome is by far the best machine, it is the worst of all when it comes to instructions. I have both the bound, printed manuals but I have had to learn most of what I know by watching excellent videos such as this one. I mean seriously, who puts out comprehensive manuals that don’t even have an index?!

[@michele6708]

You should still check your piecing units every step along the way. Your settings only take you so far and different cotton and how flat you are able to press also can make a huge difference. Plus, let’s face it, some days our precision at maintaining that straight line or starting exactly at the right spot when sewing angles can be off a thread or two. If you really want precision piecing you have to slow down and check your work regularly. I do wish Janome would support their loyal customers who spent their money on a Janome machine that wasn’t a top of the line machine and include the lower level machines in these demos. There are a lot more people out there coping without all of the bells and whistles. How about serving them as well? I know they want to sell more machines, but if the help is only for the latest and greatest, when someone IS ready to buy another machine, if they hadn’t gotten the support they needed with their previous machines, why stick with Janome, who left them hanging?

[@JanomeJAI]

Hi and thanks for your feedback. We have featured tutorials with all levels of machines, but do appreciate your point! Also please know we fully support ALL our models, so please contact us directly at any time if personal assistance is needed.

[@marilyncooper3271]

Really enjoyed your video. I have a couple of questions. I have the Janome 9480. Would the cloth quide you demo fit on this machine. And would it work with the accufeed 1/4 inch foot.

[@keinmo]

Yes and yes! The 9480 is an awesome machine -- you will love it! Be sure to try the HP foot and plate with it.....

[@glenicejones3724]

A great presentation. My question is: I have a 7700 and, whilst you say these tips can be used on all Janome's, can these work on my 7mm machine? Also, can i use the HP2 foot and plate. Thank you so much.

[@keinmo]

The HP foot and plate is not available on the 7700 (unfortuately) but even if your machine is a 7mm machine, you can definitely achieve a perfect scant 1/4" seam! Just practice with the 1/4" foot that came with your machine (O foot).

[@deborahdaughtry7745]

How does thread 50, 40 etc impact seam bulk. What thread are you using in this video?

[@keinmo]

That's a SUPER question and probably one that deserves it's own video to answer! Thread makes a HUGE difference in the bulk of your seams. But the BEST and only weight thread I use for piecing is 50wt cotton. I like Aurifil and Cotton and Steel by Sulky.

[@joyc7673]

I have an M7. With the HP foot and the HP plate, do I engage the Accufeed motor by pressing the yellow button? I use that yellow button with the AD foot but I’m not sure when to use it.

[@gincherry]

the regular HP foot is not Accufeed. The HP2 foot is Accufeed

[@cherylbergeson3858]

I can't adjust my needle on my sewing machine. I have janome 3128. I'm looking to upgrade because I can't sew big quilts on it because I can't drop the feed dogs to do free motion quilting to not enough throat space.

[@keinmo]

There are tremendous specials at your local Janome dealer right now!

[@maryfeinstein8984]

I have a janome 9450 . Can the cloth guide you demonstrated work on my 9450?

[@JanomeJAI]

Thank you for your question. Your 9450 comes standard with a cloth guide that fits with the extension table. The one shown is made to fit the Continental model machines, and will not fit your Memory Craft model.

[@dorothyraucci5258]

What if your Janome machine is 30 yrs old. It still runs great but, is limited. How do I get a scant quarter inch seam?

[@keinmo]

Try those same tips using a ruler and pen to mark and measure. Then adjust your stitching line accordingly.

[@kathycritser3932]

Hi Kim, I have a Janome memory Craft 6500 which was a gift in 2004 from my husband. I thought the 1/4 foot would help. needle to a 9.0? I ve always had trouble getting the correct quarter inch stitch. Do I need a new machine-I really love my machine Help me to find a 9.0 quarter inch stitch since I would love to get a scant quarter in right. Thanks for any help Kim

[@keinmo]

The 6500 is a fantastic machine. And being a gift from your husband, it has great sentimental value. So I wouldn't recommend selling it or trading it in. But I do think you might at least look at getting a new machine....one that has the HP foot and plate system. It was introduced in recent years and is so good, so game-changing, it makes all the difference. At least go to your local Janome dealer and test drive a machine with this amazing feature. Try the 9480 and the M8. It's worth considering a new machine for this reason alone. Then you'll have your 6500 as a back up!

[@maureenconner6172]

I have the 3160. The default stitch position is 3.5. I move it to 4 for scant quarter inch. Is this correct? My blocks are still a little small.....

[@keinmo]

Practice adjusting how to feed your fabric beneath your foot. Use painter's tape on the needle plate (or just in front of it) to get the perfect placement.

[@sailingserendipity9742]

How do you save your favorite needle position once you figure it out?

[@keinmo]

It depends on your model of machine. Some machines have the ability to "save" a favorite stitch! If your machine has that capability, then by all means find the best setting and save it! Check with your local Janome dealer for further instruction and help!

[@DawnCutaia]

Is there a way on the M6 to save the needle position?

[@JanomeJAI]

Yes, perfect your stitch, then use your manual's instructions on page 50 to set it as a Favorite Stitch! Happy Sewing.

[@IAmJustOneMom]

The Janome 1600P does not have an adjustable needle position. Is there a perfected scant 1/4” foot for the 1600P?

[@keinmo]

I believe so, but the best thing to do is go to your local Janome dealer and ask them about a 1/4" foot for you model.

[@IAmJustOneMom]

@@keinmo I have all the Janome 1/4" feet, but I was wondering if Janome has a SCANT 1/4" foot for the 1600P. I will find a dealer. Thank you.

[@cathyveverka8094]

Neither of my 2 Janomes allow me to adjust the needle position so interested how to get a scant quarter without moving the needle... Hoping Janome would create a scant quarter foot with guide...

[@keinmo]

Which model do you own?

[@cathyveverka8094]

@@keinmo jw8100

[@gincherry]

if you can't move the needle, move where you are lining up the fabric. Use a seam guide

[@cathyveverka8094]

@@gincherry yep, that's what I've done for 21 yrs with the janome qtr inch foot with the guide.

[@cathyveverka8094]

@@keinmo JW 8100

[@teresahixson8716]

I adore my Janome but it only has 2 needle positions. She's a lil antiquated like me. 😁

[@keinmo]

That's ok! Give one of these presser feet a try. You can always mark your needle plate with painter's tape, the cloth guide, or even a stack of post it notes! Be creative. Now that you know what a scant 1/4" seam allowance "looks" like, you'll be able to achieve it on YOUR machine!

[@teresahixson8716]

@keinmo I actually use my zipper foot and the needle in the one other position it will go, which is the zig zag and I get a perfect scant ¼". The only draw back is the zipper foot doesn't always want to catch or grab the material. Suggestions?

[@alliecreates6038]

Do you still need to change the needle position when using the HP foot and HP plate?

[@keinmo]

Not at all! The HP foot and plate is EXACTLY perfect!

[@alliecreates6038]

@@keinmo ok. Thank you. I just bought a Janome M7 and it has been overwhelming for me. So, I spend alot of time searching KZbin videos for help 🙂

[@yapper80]

I have a janome 6600p i am confused where to a do quarter inch scant 😮

[@keinmo]

Start with your O foot. Stitch some practice seams. And try to follow the tips i have suggested to achieve your scant 1/4" seam allowance. You'll get it!

[@evanick823]

I did not know you can move the needle position, how do you do it?

[@keinmo]

It depends on your make / model machine. But if your machine is capable to move the needle, when it is in the straight stitch position, you use the stitch width icon to move your needle to the right. Your local Janome dealer can help show you what to do on your machine.

[@evanick823]

@@keinmo Thank you. I bought my machine last summer from John Lewis in No Nottingham but I live away so won't be able to ask anybody. The instructions don't mention this feature.

[@deannapeters211]

Which machine is in the video please? Did you say CM17?

[@JanomeJAI]

Yes, the Continental M17, our top of the line dual embroidery and sewing machine.

[@karenbrunette6314]

How do you do that on a janome 3160qdc-t

[@keinmo]

You can adjust where you place the right edge of your fabric under your foot. Use painter's tape or a small stack of Post It notes to align on the bed of the machine to mark the scant 1/4" seam allowance. It can be done!

[@mes1463]

How do you set the settings on the Janome 4120?

[@JanomeJAI]

Hi! Please start by setting for Patchwork Piecing in Mode 3, Stitch 01 -- using the machine's 1/4" 0 Seam foot. You can then move the needle drop position (by adjusting the width) to achieve the scant 1/4" seam you desire.

[@sharonvogel931]

I understand wanting perfection in your quilt blocks, but if you used the same setting and foot and needle position on all the blocks in your quilt, wouldn’t the quilt come out correct?

[@keinmo]

Yes, consistency is key to putting the quilt top together. But many people strive for that perfect scant 1/4" seam, so this will hopefully help those folks achieve it!

[@gigiontube]

I’m not saying that this video is not educational; it is of course, and very well done ! But… all what is said here to get “perfect” blocks would be true only IF all fabrics used have exactly the same thickness, and all of them behave like a piece of paper, no stretching at all even on bias. Any real quilter knows that is impossible in reality, especially when using scraps or just various fabrics bought from different suppliers. Every fabric behave differently and it matters how is cut. Also, the thickness of the thread counts too. IMHO, it is more important to have all blocks the same size, to match when sewn together, than to have EXACTLY 9.5 block. From my experience, consistency is more important than precision, unless you make a quilt to be watched under microscope. I have a baby lock machine, and have several positions to move the needle, so this is not the only machine with this option. I use a scant 1/4 inch by moving the needle only when I snow ball, or I do a flying geese. But when doing regular piecing, I use the 1/4 pressing foot with guide and I might need to square the block a little bit after ironing. By the way, we all experienced what “tricks” ironing can play on fabric, especially when using steam. I don’t want to sound disrespectful with my comment, but I find many things exaggerated in these types of videos just to promote certain products, especially certain sewing machines and very “specialized” rulers. Quilting should be a relaxing and fun activity, not stressful and frustrating that we are not “perfect”. Happy quilting everyone 🥰

[@debramccafferty2918]

I'm thinking the same as you but you said it better. If all the blocks turn out the same size then they will all fit together nicely.

[@user-ec2ws2wh9w]

My Janome is a Memory Craft 6300 and does not have all those functions.

[@keinmo]

It make take some practice adjusting how you feed your fabric under your foot. You can mark the line with painter's tape or Post It notes once you find your "sweet spot."

[@legacyfarmmercantile1822]

If 1/4" dosent give you correct measurements then is it the standard piecing still?

[@keinmo]

Not exactly sure what you are asking.....

[@maudeencollier9521]

Most machines feet have different groves on the plate you're sewing on. So it's not an effort.

[@lauraharris8140]

Oh good grief

[@dianahay8557]

good information but the background music is annoying

[@karenwerts2331]