Pfaff Coverlock 3.0 - Part 3: Converting to Coverstitch, sewing a sleeve hem

[@edkeyman]

Thank you, thank you, thank you. Even with the book and DVD setting up the lower looper was tricky. Happily cover stitching now.

[@PatrickRegan413]

I found a used Coverlock 4872 recently for US$100, and this series of videos has been invaluable for figuring out how to use it! Thanks so much for these!

[@momofp55]

Thank you for showing on a circle. Everyone else shows on flat material. Again, thank you. Very good vid.

[@townsville1724]

Thank you so much! Your instructions helped me figure out the manual I have for my PFAFF 4862 Coverlock. The manual was not helpful at all, in fact I was more confused each time I turned to it. You saved me totally losing my mind and my temper and destroying everything. Oh and love that it's Australian!

[@ktdoula]

I watched this video after trying for several hours to figure out how to set up the Coverlock using the instruction book. I was doing it all wrong--you set me straight and I got it up and running! I never would have done it without your video! Thank you so much!

[@claudmei]

Thank you very much for the hint with "turning the wheel one turn back". Drove me crazy, not being able to take the fabric out. Tank you

[@Tenchiwa]

thank you very very much. i have had problems with the coverstitch. but you have shown me the way :D :D ;D the extra circle backwards to release the under thread did the trick :D Thank you once again :D

[@stowesuz]

Perfect! I have a singer 14t968dc but it is just the same as the pfaff so your demo was great. Vince Acuri is very nice to demonstrate the singer but his videos are too long and he has difficulty with focus as well as getting off on tangents. Your video finally got me to understand what to do AFTER threading, which I couldn't find anywhere. I have the huge handbook but I didn't find how to actually start to sew my coverstitch. So thank you again for your clear demo! And the pro finishing of a circle was great too because before mine was never even at the end.

[@jessiecunliffe5985]

Really excellent series of videos! Thank you.

[@hawgqueen25]

You are so interesting and making it easy to learn...thank you for sharing your experience and love of sewing with us

[@joanneblair2087]

Thank you for this video. I have the 4.0 but threading is the same and the manual isn’t very clear. I kept trying to thread the 3 needle by using the green threD guide.

[@rubygloomdark]

I've been finishing my overlocked things wrong all this time your way is easier and preserves more stretch why have I not seen it in a video before I'm looking to buy a coverlock 4 but couldn't find a video of the change over procedure figured it can't be too different Thank you for explaining and showing everything so well etc xx

[@hartsews]

Your videos are so informative!! Thanks so much!!!

[@joycerolley1635]

I will need to watch this a few more times.....

[@janeEAV]

Love your videos, wish I was in Australia! Thank you for making them👍🏻

[@dra.ilsecerdamontero9378]

Many many thanks. You aré wonderful. I am from Costa Rica, which doesn't give support to Pfaff. I bought my Coverlock 4.0 one year ago at the US and I couldn't use it even I have tried many many times And the manual is not very good. With your video No. 2 I have seen where was my error and now my Coverstitch is working fine ! I really appreciate your help. Although version 3.0 is very similar to 4.0 if you have any vídeos please share them too. My best regards. Ilse

[@romar-ut9mx]

Gtazie mille dall italia🙋🏻‍♀️👍

[@kathydoucet7913]

I have just recently come across your KZbin channel and I also have Pfaff 3.0. (New for me) I have seen your instructions on how to thread the bottom threads but the thread placement for the needles does not show the full placement through the thread path. I have tried to place where it indicates, but it’s so confusing! Please help. 😍 I Owned a BERNINA fund lock for 35 years and absolutely loved it but it was not a five thread. So this is so new for me I need all the help I can get thank you thank you thank you thank you thank you

[@cathylarsen8235]

Thank you so much. Your tutorials are wonderful!

[@sheilashung323]

How do I adjust the tension? It never looks like yours.

[@sabrinaswoboda5624]

Fantastic!!! Thank you!!!

[@conceicaovicente8147]

Boa noite. Será possível traduzir em português? Obrigado...

[@ginahopkins7105]

HELP. I have this machine, Ive followed this video and the manual. My left needle "C" (blue guide) is skipping stitches. There is a new CORRECT need inserted right, I am using good quality thread, and it is threaded correctly. I have been trying to adjust the tension higher.. and lower, I have been trying to increase my presser foot pressure....

[@suheylacall]

Thanks

[@mmstudio5994]

Thank YOU !

[@amalin32]

hola me gusta mucho como hasenseñado a enfilar la coverlock 3´0 yo e comprado una pero usada y me falta la mesa de extension y la parte donde van los numeros 2,3,4,5..osea donde va el pie, me podrias decir donde lo puedo comprar online grasias saludos desde Italia

[@mellosays]

Hello, Margaret, and thank you so much for your videos. I had a question that I hope others will benefit from as well. I would like to attach picot elastic to underwear made of knit using the elastic foot for the Coverlock 3.0. On the manual, it gives me the option to set up the machine only with needles C and D, C and E or C, D and E for coverstitch, but the picot elastic, which is only 1 cm wide, sits on the right side of the foot, so if I use a narrow stitch with needles C and D, the thread for the left most needle goes off the elastic. Would it be ok to thread needles D and E together, without C, or would there be a different solution for this application? Thank you so much for your help!

[@AntoniettaTraina]

Salve si puo avere la spiegazione in italiano?? E molto interessante, se può spiegare anche per la cover 4. O con copertura?? Sarebbe un grande aiuto..

[@janecuschieri3843]

I know I'm threading it well and dial the right tensions according to the manual but it still gives me nightmares and doesn't do the underneath overlock or the purple thread breaks...what is the matter please?

[@amygawtry754]

I am trying to coverstitch a very fine jersey and it keeps getting jammed up. I have a 4.0 and I LOVE your demos. Can you suggest what I might be doing right or wrong? I got this serger and would not be using it so much if it weren't for your wonderful videos! Thank you!

[@martinec5480]

Merci Madame

[@suhsurasulubarloche5266]

Buscar la forma de que se pueda traducir a otro idioma Estupendas máquinas Lastima que ya en Colombia ya no las venden

[@manuelamilan9304]

I live in Italy, and I was wondering how much would this cover lock cost in australian dollars? thank you

[@nurgorur704]

Thanks....

[@asianmtl]

Thank for the video! And where can I purchase it!

[@SuperDerindeniz]

Thank you for your effort!.... :)

[@ilkaysarkayazuhal6621]

Türkçe altyazı lütfen🙏

[@warialdasue]

So I can’t do hems like that in my old Hobbylock?

[@warialdasue]

I also have an old Hobbylock and would like to know if I can do hems like that

[@mariaaziz7209]

I like your vid

[@serikandiku]

Thank you so much for your video, although if the cameraman/woman move a little slowly and not shaky, i wouldn't​ be too dizzy.

[@manuelamilan9304]

ok I saw thanks

[@alex-fy4fe]

It's not directly inline bits missing not stitched looks dreadfull very unprofessional at the end with the blue thing being stiched was goin to buy but not now!

[@rechercheclothing]

Hello, Can anyone tell me where I can get a cutter blade and tiny screws for a Pfaff Coverlock 3.0? I cant find them anywhere on line and Pfaff said that they cant sell parts: ( Ive been looking for a month HELP! -Veronika

[@juanvarela6540]

Thank you!