NFS Heat/Unbound CPU Load / Temp Fix 2023 w/ new hardware |

[@Deathmasgu]

This is actually a must. There is no sense in pushing CPU to 100% and 100°C every ten seconds. That seems obviously bad for CPU health. Now I can run it at 70°C or below, so it is safer now. Many thanks to you.

[@xhiragmedia]

This absolutely works in Unbound too just tried it, I have the same processor as you and I was crashing due to EXTREMELY high temps, now im at about 70 degrees

[@SgtDrayke]

Nice. That's for confirming.

[@notAvnn]

can u help me out with putting this file on unbound folder? like i cant find where the folder is

[@xhiragmedia]

@@notAvnnOn Steam right click your game and check under the Manage section, you will see Browse Local Files. For EA Play its more or less the same but you have to check the properties tab.

[@notAvnn]

@@xhiragmedia okay got it thank u

[@MikeBeard-gb4ym]

Thanks a lot, this tip really works on Unbound , earlier I've put user.cfg without quote " on the end of config and ride still was freezed, now is the pure speed&madness 😁

[@addyaselan]

Yo, how do you do for unbound? Where do u put the .cfg file? Mean alot if could share. thanks!

[@SgtDrayke]

Same location but for the unbound game directory

[@tahmidanzum151]

brought my temps down to 60 from 80. You are the best

[@SgtDrayke]

Ay great. Good stuff 👌

[@harmaninternational5755]

Incredibly helpful video. This lowered my CPU temps by nearly 20C! The game is now playable. Thanks again for your help, we all really appreciate it.

[@SgtDrayke]

Hey No prob. Glad it worked for you 🫡

[@adasdiciunas8835]

Thank you so much! I always thought why my fans ramp up so hard during cutscenes, but now it's a breeze. I can finally play this great game without needlessly pushing the hardware.

[@SgtDrayke]

Great. 👍🫡

[@6ALEX02]

You saved me I bought a new system with an i7 14700kf paired with an 360Aio The i7 reached 93° in Cinebench, which was normal, but 100° in NFS Heat and Unbound Thanks to you its now under 70 constantly

[@SgtDrayke]

Good to hear. 👍🫡

[@ichromax7]

where is the user config file in nfs unbound

[@SgtDrayke]

@@ichromax7 make it and put it in the game directory.

[@madd0gg092]

bro, i have the same cpu and i've seen 96 degs just 5m earlier, i tunred 4 into 8 and still heating up

[@madd0gg092]

update, i had to pick up NORMAL profile on MSI center, now it barely hit 72 !

[@Marke222]

Thx man it really helped love u for this video :)

[@SgtDrayke]

No prob 🫡

[@joshd108]

My poor little i7 6700 is maxed out with this game, but MSI Afterburner shows my temps don’t even pass 75c. Even so I eventually crash and my computer starts freaking out and glitching. Gonna install a nicer cooler in place of the lil stock one, hopefully it helps.

[@SgtDrayke]

Go hydro loop. Iv never had an issue with Corsair . Even if it's a single 120mm rad hydro you will see a night and day different compared to a stock intel heatsink cooler. .

[@VIPER.digital]

I had massive stuttering and my CPU was consistently at 100%. Now I can play without any problems, thank you bro

[@SgtDrayke]

@VIPER.digital 👍🏻 great

[@mnordavind]

Works in Unbound, I went from 80C (CPU/GPU) to 70C, but I think I lost FPS, it doesn't matter as long as I don't die from the heat, THANKS!.

[@SgtDrayke]

Glad to hear it

[@thomashaas7222]

dude thank you so much. saved my old CPU the torture of running this game.

[@SgtDrayke]

@@thomashaas7222 np 🫡

[@yashmistry5542]

thank you this helped me !! i have a i5 11400f and it was reaching 85 degree when playing the game i tried this and now it never goes above 70 and no performance lose thank you !! liked and subbed

[@SgtDrayke]

@@yashmistry5542 brilliant. 👌

[@aidanmurphy4753]

Some people are genuinely so smart. Thank you very much.

[@SgtDrayke]

No prob

[@arhamsulman4704]

Wow it made a huge difference my temps were around 80 first time i started the game. Then second time i played it it was around 60 - 70 but with this method its all the way down at 23 - 27 degree ( no performance cost ) on 12700k with 3080 ti 32 gigs of 6000 mhz Ram.

[@SgtDrayke]

NIce good to hear its working for you 🫡

[@FunIsGoingOn]

I've been playing NFS games since Porsche in 2000 and Hot Pursuit II 2002, left disappointed after trying the 2012 Most Wanted reboot. Rivals I liked, but it always randomly crashed, now that I think of I can't tell if it maybe had the same problems. Then Forza Horizon came out and later I got the Xbox One for Forza Motorsport 5 and the rest is history. Now after those decades, Steam turned 20yrs and NFS Heat was on sale for just 7 bucks, cheaper than a double shot Whiskey at the local pub, no brainer, let's give it a go I thought. A mix of Underground, the old Most Wanted, Undercover, Hot Pursuit at night and Pro Street at day, what could possibly go wrong, maybe it's back at the roots, yeah... And then, you guessed it, I found this video in 2023 because the by now 4 years old Heat makes it's name an honour by producing much physical heat! That poor i7 9700 here went to 90°C and above, sometimes crashed. That's a 8-core but without HT, so this fix helped much. Now when game paused and writing this comment, I get around 75-79. Always learning a thing in the game of life.

[@SgtDrayke]

Gee that's still hot. Running a heatsink cooler on that i7? Look at going single fan hydro. It is a shocking shame what ea have done to NFS. But it's not just ea. Since they let criterion have it. You could also try reducing the games priority on the CPU in task manager might help. But instability might come back. Worth a try.

[@FunIsGoingOn]

@@SgtDrayke It's a bad stock build, too. That i7 is in a MSI Aegis 3, a tiny micro case named as portable gaming PC, together with a RTX2070 Super that's making things even worse for heat/Heat. Funny is the fix helps on AMD, too. I just put the same SSD, the very same system in the other PC with a 6core (logic 12) Ryzen 5500 and GTX970 4GB. That one didn't had the 100% issue, it ran at around 60-70% and that same 4-core config file reduced it to 30-40%. And it still looks great and plays smooth. It seems the better your GPU is and the higher the graphics setting, the more it increases the CPU load, the more people run into that issue these days, more than back then.

[@SgtDrayke]

@@FunIsGoingOn AHH yeh makes sense why that CPU is hot then those things are tiny. So more GPU bigger better or maxing a games setting means more demand/strain. @Jaytwocents does a good vid of this showing the visual effects of "bottlenecking" which works both directions CPU to GPU and GPU to CPU.

[@Relatyvity]

When a racing game uses more of your CPU then playing Cyberpunk while forgetting that a Linux VM is running in the background...

[@SgtDrayke]

Yup. More to the point of when a game that has less particles and graphical detail to process/render than cyberpunk in low spec with a Linux VM running cyberpunk in the background. Poor optimisation and shows they didn't care if people's consoles burn up because they're at full tilt.

[@rickwright8858]

Amazing worked great, thanks

[@SgtDrayke]

no prob 🫡

[@RadicoolToons]

thanks bro, it worked!

[@SgtDrayke]

Great 👍

[@KarusMBII]

Brought my temps down. Thank you bro.

[@SgtDrayke]

Kl. 👍😂

[@ryvvo]

My brother come with this problem, he has i5 6500 and 1660 super, game crash, cant open, etc... cpu at 100%, so he ask me to play the game and see if its happens too.I have 3060 and 5600g and got the same problem... we copied these instruccions and the game goes 65C° and 35 40% of usage, thanks man!

[@SgtDrayke]

👍 No Problem

[@sw1tch921]

thanks man, my cpu was getting in the 90's

[@SgtDrayke]

No prob.

[@zabu14]

running in the 90s huh

[@Crimsongz]

Thank you very much !

[@SgtDrayke]

No probs

[@SelvDUDE]

Thank god u saved my pc. I had this problem where my 12 core cpu ( i7 12700F ) was at a 100% usage thing is my whole pc crashed playing this game and was unusable for more an hour or up to 12 hours after shutting it off. This game is eating my pc and i don't like it.

[@SgtDrayke]

Gee. Might be worth checking your heatsink, give it a clean if it needs it and change the compound if you know how. Compound can dry up and crack between the CPU and heatsink this can result in an air pocket or inability to transfer/disparate heat correctly this CPU and socket remaining hot.

[@SelvDUDE]

@@SgtDrayke it has a 100% usage not 100°C my cpu is not running hot it is around 60-75°C most of the time and should not run hot and it is cooled by a aio. This pc is only 2 years old

[@SgtDrayke]

@@SelvDUDE well i read that as Degrees, the entire paragraph would then make sense.

[@aayobruv]

I have a 3070 5600G and it still runs like crap and stutters, even with the note config. The whole reason I bought this game on PC, was to get the full benefit of more than 30fps like on console, just to have major performance bottlenecks on an expensive PC. Dear god.

[@SgtDrayke]

yeh so this isnt just limted to NFS Heat,, Most EA titles have issues on pc. its an ea pc thing, The 5600g is a 6c12t cpu.. so running it on 4 will be fine. you can simply copy past the "bit" in the description., make sure you don't change any wording/letters/symbols/spaces . Make sure the file created in Notepad is saved as "user.cfg" cfg being the file type. Added note If you are running the Steam version of the game it has been known to not work.

[@an-v_e-r3328]

From 85 to 60 Degrees ..Thank you so much!....

[@SgtDrayke]

@@an-v_e-r3328 kl no prob

[@Combine7355]

Doesn't work for unbound anymore i have a i5-9400f i am getting 90ºC, it used to work before :(

[@SgtDrayke]

Ok for you it doesn't appear to. I've had many people with different systems and have configured the file differently saying it has worked. Just one of those things its not for everyone.

[@hectorsparadise]

it actually worked finally my ryzen can rest at low temp lol

[@SgtDrayke]

Boom sweet 👍😆

[@splatter9380]

thank you so much bro!!

[@SgtDrayke]

No prob 👍🫡

[@TheTomo75]

Hi, I have i9-11900k and believe or not it is always at 100% usage, after I create user.cfg file it is about 70% usage, thank you :-)

[@SgtDrayke]

Good to hear. Glad it worked for you. 👍😉

[@Razvanixu]

Thanks, it worked on my ryzen 7 6800h, my laptop got to 100°C constantly while playing, after the fix i get 80 constantly with some spikes up to 86 wich is waaay better

[@SgtDrayke]

I'm guessing that's on a laptop. Anything above 80 is not healthy for your hardware. But it worked.

[@THEWHITEBABY]

Thanks a lot!

[@SgtDrayke]

Kl no prob 👍🫡

[@bababklj3638]

i am checking in my files and it looks like i dont have a "bk" file or anything that has already been named "user.cfg" is it alright if i just create a notepad and name it "user.cfg" edit: nvm sorry i figured it out, im on a new pc with new windows 11 (im used to windows 10) and this is all confusing

[@SgtDrayke]

I applaud you 👏 for sticking with it and working it out! Not many do at the early stages. Windows 10 to 11 is a little different mainly the file explorer. Did You know you can go into task bae and move the start menu back to the left , remove the search box and news stuff off the taskbar. 😉

[@tijolo233]

i was using 100% now its 20-30 ty bro

[@SgtDrayke]

Nice, np

[@TabashiiSC2]

This video is very good and did help. However, my temps remained to high to my likings. Another issue seems to come from the FPS. If you have a tool to cap your FPS that'll make a HUGE difference. I use Nvidia control panel to do it. Sucks that EA couldn't be bothered to add an option to limit the FPS in their options menu. Lazy c*nts!

[@SgtDrayke]

Ea does a lot of things, especially not care about pc users. The pc market is tiny for the game . So they just port of the console. When it comes to NVC. I am proud to say I'm a geek. First thing I do after getting a game is load it then close it, straight into NVC and make my own profile (profile is like geforce experience but for geeks) Heat and FPS. All the extra trimmings like AA or msao, ssao etc turn off. Just load the game with default res, capped FPS to match your screen, medium graphics options with AA off and motion blur all that. The motion blur, particle extra texture filtering will all eat your GPU (reduce FPS and overwork your GPU = heat) Then once youv found a stable setting go back in and just switch things on until you find your preferred setting. If your on a laptop that's 1080hd you could go to 960 res as this isn't regarded as hd it's less demanding. Good luck

[@Edzieq]

It's work! Thank you! After locking the FPS, the temperature dropped from 85 to 70℃

[@SgtDrayke]

great

[@LeBronFan20]

Capping the FPS did it for me, thanks brother

[@SgtDrayke]

@@LeBronFan20 nice

[@sakhozzz]

tysm sir it worked

[@SgtDrayke]

Good good bud. Give the vid a like 👍. If youv got time also check the channel

[@Gregg_y]

This works, but do you know if i can do something about the fps? Especially during night/cop chases my fps drop to 40 while i have it limited to 60, i also get random stutters at night mostly so yeah idk I would appreciate some help

[@SgtDrayke]

@@Gregg_y check the latest comment reply I posted on the other video. Will have what you need. kzbin.info/www/bejne/j6azfWCqi752iassi=wN9G9B-Oz2YHAwjp

[@Gregg_y]

@@SgtDrayke would you recommend changing the PROFILEOPTIONS to your recomendations as well? im on an intel i3 10100f GeForce GTX 1060 3gb and 12gb ram everything recommended for heat exept ram also does it matter if i have graphics high or medium?

[@SgtDrayke]

@@Gregg_y 1080 low to medium. Then adjust basic options on the fly to a level your happy with

[@bighneshbhoi]

Hello, I am currently using an Asus TUF A17 with 8 cores and 16 threads. Although the game runs smooth most of the time, but often I feel severe lags which makes it unplayable. Would you be kind enough to tell what data should i tailor to put on the user.cfg file. Thanks in advance

[@SgtDrayke]

so 8c16t is same as mine. use what is in the video description.

[@bighneshbhoi]

@@SgtDrayke thanks for the reply brother. Bdw are you sure that there is a ( " ) in the end of the script ? am pretty confused, on some places there is that symbol and on other places there isn't

[@SgtDrayke]

This is copied directly from my file., which works -Thread.ProcessorCount 4 Thread.MaxProcessorCount 4 Thread.MinFreeProcessorCount 0 Thread.JobThreadPriority 0 GstRender.Thread.MaxProcessorCount 4"

[@bighneshbhoi]

@@SgtDrayke thanks mate 🔥

[@SgtDrayke]

@@bighneshbhoi no prob

[@namefirst6835]

temps are still high but not as much thx man

[@SgtDrayke]

kl

[@Juggar-u]

Do i need to change anything from the user.config you provided in the description! i have ryzen 5 2600x and rtx 2060 (6gb) And will it work for me?

[@SgtDrayke]

So that's a 6c12t base 3.2 turbo 4.2 . Just match the same as the description.

[@Juggar-u]

@@SgtDrayke Thanks Man 🤍 Appreciated 👍

[@SgtDrayke]

@@Juggar-u Np if it works for you make sure you give the vid a Like 👍

[@morgan3625]

like sure it helps with temperature because you're literally making an artificial limit on how many cores and threads your cpu will use so obviously you will get much lower performance. I went from 130 fps to below 90

[@SgtDrayke]

@@morgan3625 yup. A trade off. It's an option that the game doesn't let you do, to some it's been a saver to others not so much. Is what it is.

[@TVCHLORD]

how can they keep releasing games like this, such a simple fix that completely ruins the experience without

[@SgtDrayke]

Well. Consoles. Ea only care about the highest seller, the game is made on pc tested in a console sandbox, then play tested and released on console. Then they port it back to pc. As long as the majority which is console are happy they don't care. But think about the fact the game code is to set the consoles to 100% performance regardless of load.. that's why consoles run hot and burn out. Also people moan about games like cyberpunk and starfield having glitches but when it comes to EA NFS / FIFA or COD games with serious issues like glitchers , hackers , everyone is all silent.. so nothing gets done about it... go figure

[@TVCHLORD]

@@SgtDrayke this works for NFS Unbound too, that game has the same exact issue

[@SgtDrayke]

@@TVCHLORD yeh it does bud . It's a stupid thing.

[@DaveOC]

How the cutscene intro is not lagging for you? I have a 3080 and the audio/video of the cutscene intro is super laggy, Even with in-game cutscene.. :/

[@SgtDrayke]

@@DaveOC oh it is and they are. Reducing load helps a lot. Allows the CPU to prioritise loading assets etc in the background. But no matter what I try the cut scenes will always be laggy stuttery.

[@DaveOC]

@@SgtDrayke But the audio is not cutting off like mine.. I just don't understand. Even with the user.cfg file, that does not help for the cutscenes. But the rest of the games is completly fine in general.

[@SgtDrayke]

@DaveOC I can't give an answer for you. It's just a known fact that EA games ported back to pc are poorly optimised. Just how it is.

[@_Ciicciio_]

same here, idk what to do, it's really annoying...wish there is a fix for this

[@akiplay312]

Can i even do this with my i5 3470? Game runs at 40-45fps but as soon as im in town it goes into slow motion but shows around 35-40fps.

[@SgtDrayke]

@@akiplay312 CPU isn't strong enough for the game.

[@prasannaraj3151]

Bro I have a doubt , Does the user.cfg file already exists on the nfs heat directory or we have to make one and paste it there?

[@SgtDrayke]

Yup just the different vids and comments . Make it. Easy to do aswell.

[@QuackShac]

Im using steam for this and clicked browse file location to find the game files. I couldn't find the USercfg thingy, any reason why?

[@SgtDrayke]

Make it.

[@MORvvv]

I'm just testing this and then I still got 93 degrees but cpu usage below 50%, I play on legion 5 ryzen 7 5800h and rtx 3060, I play on low to medium 1080 60 fps rivatuner, user.cfg thread on 8,

[@MORvvv]

any solution?

[@SgtDrayke]

CPU is an 8 core. 3.2ghz . But mobile chip. Heat will always be your enemy with laptops. I'd just run it the same 4core setup. Would release 4 cores for other process. Game runs fine on 4. (Some times better then the more cores) Run the game 1080 medium textures ,. Turn off msao, AA, motion blur etc disable vsync for now. You should see a noticeable difference. Really you could get this setup running the game 1080 high textures details. But there's a lot of if's. Like background apps. Total mem and speeds etc. 3060 is a strong card but not powerfull. Also if your CPU usage is 50% and core clock is stock 3.2 or less. Then I'd question if your laptop has its fan curve or cooling curve right. All air vents are clear of dust or obstruction. Chances are your CPU and GPU share heatsinks.

[@SwagTheDripper]

Hello, my problem is that the CPU usage keeps increasing the longer I play the game. Even if I close the game my CPU usage stays hight for the WMI Provider host. I never had this problem before or with any other game. And the only solution is restarting my PC. Any advice? I have a Ryzen 7 3800x and a 5700xt with 32gb ddr4 so my specs should be more than enough.

[@SgtDrayke]

So WMI PH is not really heavily used with NFS heat/Unbound . Although it has been know for 3rd party software like razor and other "hid" to use more resources whilst in game. Simple google search will show you how many people have issues with "additional" programs like synapsis or razor hogging resources when a game is launched. It would be worth having a look at your top 20 process whilst the game is loaded to see if any "razor" or "synapsis" or basicly any software you installed for controllers, mouse keyboard, or even "software" youv possibly installed with out knowing. If you got the game from another sources, then it could have been compromised.

[@SwagTheDripper]

@@SgtDrayke A bit late but here is a little update. The problem was NFS Heat. If you go to the in game settings you can choose between graphic presets. If you choose ''Auto'' it will keep stacking up your cpu usage over time somehow. If you just use any other preset like ''High'' or ''Ultra'' it wont happen.

[@kledbaken]

i dont have the Bk folder, and i dont find any user.cfg, i created one but is not working, still 100% CPU ,help please !

[@SgtDrayke]

@@kledbaken don't need the bk folder it's for backing up files. And follow the video. Create the file.

[@towsifbillah834]

bro my cpu temp continuously hiting to 90 degree celceus (ryzen 5600h) in my acer nitro5 laptop what should I do? I have low down the graphics from ultra to medium but nothing happened.

[@SgtDrayke]

Id say prey .. jokes aside Laptops of any kind unless you pay skywards of 3k are not meant for gaming. especially games like nfs that eat CPU's .. reduces the resolution to 720 or 1080, play on medium to low settings, turn off AA or MSAO any kind of advanced anti aliasing or particle/ textures.. use the file on 4, . if you can with gpu console or in game limit the game to 60fps. besides that not much else.

[@zeancool217]

ngl i cant see the actual cfg file for some reason tried unchecking the hide extension thing but still cant see

[@SgtDrayke]

That's because some might not have it. So like iv said/shown in the video.simply create it .

[@zh-vu7zc]

It's not working properly, my cpu temperature lowered a little bit. It was 90 degrees Celsius, now it is 85 degrees. I have Ryzen 7 5800x.

[@SgtDrayke]

Yeh so AMD admit the 5800x runs hot and is designed to do so. It's heavy recommended to only run that CPU with water loops or hydro . And if you do with no option run them with air heatsinks to set the temp limit to 88% or risk damage to chip/socket. A Corsair h115i elite hydro if you have the space would cool that easily down by 30c. But it wouldn't be silent.

[@olympic285]

ryzen 7 5700x nvidia 3060ti how many cores do I give it, my cpu has 8, do I use the 4 in the notepad or do I try a higher number?

[@olympic285]

Using 4 right now and it's working fine, thanks

[@SgtDrayke]

Yeh same as mine. Boom answered it your self well done.

[@olympic285]

@@SgtDrayke is there a way to lower power usage? I would assume not because the gpu is fairly demanding of power

[@SgtDrayke]

well no not as such in either cases. if you are saying "power usage" as in ref to "amount of power being drawn/used by devices or total power consumption". you can lower your gpu power draw with software like msi afterburner (if you dont know how to use it, read read read. you can cause some serious damage) but that will in turn reduce your gpus performance. same with many things. like reducing your memory voltage would also reduce its working performance. same with the cpu. but if you are maximising the hardware to 90+ Load they will go to the maximum power draw to support demand..

[@re.helena2064]

Hi i have a few questions about this video. 1. Does it fix stuttering and fps? 2. I am using intel i5-4460 CPU 3.20GH should i change the config?

[@SgtDrayke]

Hello. so to answer.. short answer.. Who knows.. maybe depending on your system that i know nothing about. its down to the individual case situ. Long answer You havent stated your GPU so i can only presume its either a potato or a super banana of doom. CPU and GPU go hand in hand. if you said you had a 3080 with this cpu i wont just laugh but also slap my forehead whilst farting.. but it could work just not well. But other way if you said you were using a gtx560 from the 2000's on this cpu id say it could work but wont look great. more on this in 2. FYI the cpu you have is meh in the world of gaming now.. it will work but not for long with the games out now.. good for a home server or nas tho. but anyway . 1.. Yes and no. Depending on your hardware and issue.. a bit like. you are the computer hardware & have two hands. you need to hold all your game graphics and sound in one plate which your being told requires 90% performance the communication of graphics and sound in another plate require a minimum of 25/30% performance. but additionally internet traffic, controllers, other 3rd party applications in the background also need their slice of performance. call it another 15% on smaller plates maybe more than one. so providing you have the Minimum required hardware to play the game one would presume your cpu is 100% with in the req specs for the game., but you need to take 90% 25/30% and 15% out if that. so youre two hands then have to juggle all these moving plates of data and workload choosing which is priority ... This "bottlenecking" where the game is saying "hey i want 100% System (global) performance right now continuously from now until i say stop.. so i have it on tap" causes the system out side of the game to chock. but also become hot and thermal throttle/limit. consoles this isnt a problem as they are all in one OS. they are designed to "reach top performance**" and hold it for long periods of time. ** being that even this is a soft limit and not 100% due to thermal throttle. then recent times consoles including discord spotify etc. which eats away at your system performance and network connection. when you hear about consoles "burning out" and all they were doing was "chilling in lobby or casually roaming a map".. manufactures say its a lack of space/cooling. but if Heat was being played id put it down to the console being set to self destruct mode., PC there is a lot in the background.. So what this file does is it says "ok game we see you want 100% system (Global) performance. so this is what you have.. its only "say" 4 cores 4 thread. you think there is say 8 cores 8 threads but its a lie ignore it , here have these 4. all yours." this in turn allows the os and other apps to breath and manage data "optimised" with the remaining cores/threads. this in turn helps offload bottleneck with the gpu. so you will see in task manager, 4 cores and 4 threads to got 90%+ load will be primarily with the game. whilst other cores/threads will still show a reduced amount of workload outside of the game requirements . 2. YOURCASE.. your cpu is 4c 4t . decent mid range clock. supports ddr3 mem. so its not the cutting edge but its all youv got and can still work. just dont have high hopes. and this wont play the game max. (i dont know your gpu) Try the 4. otherwise try 2c2t (for me this wasnt working in testing) there is no harm in trying as its a text file that doesnt modify anything. if it doesnt work the game will crash. close it with task manager and then just edit the text file back. or create a backup template. I am aware that for some AMD cpu's this apparently doesnt work. why duno. should could be a miss type.. again duno. who knows..

[@jasonfoote6562]

hello! i have a Ryzen 5 7600X 6 core 12 thread, 4.7GHz base and 5.3GHz turbo and a RX 7700XT, do i need to do anything differently or is just the same, i dont seem to have the file already which means id have to make one, im just a bit scared to mess around with files and stuff and screw something up, GPU is obvioulsy at 100% util at like 50/55* which is fine obvioulsy but yeah my CPU is at like 80/85* at about 70/75% util which is just messed up and still casue my game to crash. i know the vid is a year old now at this point and im a bit late sorry!

[@SgtDrayke]

@@jasonfoote6562 so start with .. 👍 good job with the details about your hardware setup. So 6 core your best trying the 4c config. and yes just make the file your self. In one of the video descriptions iv pasted the text lines. Can just change to 4. Doing the file won't mess anything up if it doesn't work. So don't be scared of that. If it doesn't work the game will simply hang/crash. You can ctrl alt del to get to taskmanager and end the nfsunbound exe to get back to desk top. Also just deleting the file will set the game back to normal. The file it's self doesn't do anything to the GPU. It's purely telling the game there is less CPU cores threads available to use. Doing so will lower the heat but can affect your FPS. Give you got a good GPU it shouldn't be much but you might see a small reduction in your GPU load. This is because lowering the games core count may affect how your CPU also handles the game data to the GPU. Intel's this isn't an issue. AMD I'm not to sure. You will still see some CPU cores at 100 and high temps but as a total package you should see a reduced total load and temp. Also worth noting that AMD CPUs are notorious for running hotter in anything compared to intel. Hydro cooler setup is the best/simplest option for reducing CPU thermals especially with an AMD.

[@jasonfoote6562]

@@SgtDrayke thank you so much for your quick relpy, i tried it and unfortuantly im one of the unlucky ones were it didnt work which sucks, thanks for helping htough!

[@SgtDrayke]

@jasonfoote6562 ok. So just to confirm youv copied the text in the video description between The 3 *** *** not including the 3 stars. No additional spaces. You have to keep the " on the end. Saved the file and placed it in the same directory the game .exe is located in. Additionally this has to be the Ea client version. Steam does have a habit of removing the file. Some people have saved the file with encryption through notepad but limited success.

[@jasonfoote6562]

@@SgtDrayke yes, i copied it exactly between the 3 stars without the 3 stars of course, right into the game folder where the actual game is and its files and yes im using the EA client as well not steam, and still the same thing it starts a little lower mabye 75* instead of 85* and only 50% util instead of 70% but as soon as i start going into the garage and driving around it jumps back up, i also thought since i only have 6 cores and 12 threads i changed the 4 values to 2 to see if that made a differnce and unfortuantly didnt either

[@SgtDrayke]

@jasonfoote6562 yeh unfortunate. Thanks For the info though.

[@I_O246]

I tried this and it’s not working for me. I’m running a 12th gen intel i5 12600k with an AMD RX6800, there’s no reason why it needs to use all 10 cores. Idk what I’m doing wrong bro. 🤦🏻‍♂️

[@SgtDrayke]

@@I_O246 doesn't work for everyone. Just double check there's not extra characters, spaces etc.

[@daffapamungkas1591]

Hey bro, are the settings for the Intel Core i5 11400h the same as in the description??

[@SgtDrayke]

What does that CPU have?

[@jayceeal8351]

It didn't work for me :( It crashes everytime after 10 minutes of playing. Temps went stable at 70 .. all other soulutions you find online didn't work either.. I'm absolutly clueless.. my hardware is Gigabyte Z590 Gaming X, Prozessor 11th Gen Intel(R) Core(TM) i5-11400F, 16gb ram, 1tb ssd Kingston, Geforce RTX 3050. Can someone help me ? I'm not that educated in pc stuff so a long explanation for dummis is the thing i need :D

[@SgtDrayke]

Soooo... Firstly it doesn't always work for everyone. there is a lot of parameters to cover and sometimes it just wont work. I would say load the game default with out any additional files. (like the cpu fix) go to options and set the game to run in window mode with graphics settings to medium or low. when the game is in window mode you can Alt+tab out to desktop and then use the mouse to resize the game window. unfortunately the game doesn't always remember the window size you set after every game restart. In regards to your cpu and gpu, your cpu is still strong even to todays standards, memory being 16gb is good in size but obviosly depends on speed. DDR4 ? i would probably expect 2600 or 2800. unless you paid out for 3200 back in the day. but your gpu is 3050 which is not great. anything below 3070 is really a rip off. some argue the 3060 was great at its time. but if your doing anything above 1080 or be it 1080 max youl suffer. you can get some good 3070ti second hand cards out there at a good price. this would be like a doubling of your gpus performance with this system. i wouldn't recommend looking at the 4 series with the rest of this hardware. also depending on psu limits probably not work looking at 3080. makes the 3070ti a good mid point upgrade. quick look here in the uk a decent 3070ti like the tuf around £360 or look at the EVGA 3070 XC3 black some great deals at £250 great card still packs a punch. also good for an editing rig. but returning to putting the game to window. from this point your able to monitor other applications whilst the game is in window mode. you can use tools like Hardware Monitor (www.cpuid.com/softwares/hwmonitor.html) is personally use the zip version. this will let you see temps across the system. dont always rely on task manager to give you correct information. CPU and heat. If your using a heatsink cooler on your cpu it will be hotter than hydro loop or water-cooled. you enemy here is air flow and air temp. room temp will also effect your system temp. how can you reduce your cpu temp? depending on the hardware go into bios and set a harsher fan speed or in the os if you have fan control program set it to react with a harsher fan speed to temp. reduce load on the cpu, do dont run extra applications in the background when gaming, (like chrome or spotify) dont just think they are closed because they are in the tray. actually end there process. once you have the game in window and yourv found your base stability then progress upwards. so either up the games settings or set it to full screen see wat happens. i would try the cpu fix, your cpu is 6c12t so i would run the same setting iv put in the description setting them to 4. make sure you have copied it correctly to notepad and saved it correctly. ***Thread.ProcessorCount 4 Thread.MaxProcessorCount 4 Thread.MinFreeProcessorCount 0 Thread.JobThreadPriority 0 GstRender.Thread.MaxProcessorCount 4"*** highlight and copy everything within the 3 stars including the final comma . not including the 3 stars. paste to note pad. any additional characters will cause issues. Additionally go into nvidia control panel for your 3050 (which by the way is not a strong gaming gpu for anything above 1080) go to the option "configure surround, physX" make sure your option for PhysX is set the gpu not cpu, Other questions id be asking is does your cpu run hot in the 70c when playing other games. if yes. then question the type of cooler your using, diretion, fan placement. when was the last time it was cleaned or even if its a 3 year old system does the compound between heatsink and cpu need to be cleaned/re-applied.

[@someonetookvolt]

Hi, is there any way for me to run the game on less than 4 cores with a 6/12 9th gen i7? I only get a black screen with less than 4 cores in the cfg file (I know I shouldn't use odd numbers so the question is: Can I run it on 2 cores only?). Thanks

[@SgtDrayke]

So I was getting issues when trying to config with anything below 4. 4 as is works great and should be just the standard for everyone. By all means try 2. Even mix it up the worst that can happen is the game crashes. Just simply edit the doc back.

[@defnotatroll]

This game and that fix predates 12th+ gen and the p and e cores. I wonder whether the cfg can get better performance if configured in a different way

[@SgtDrayke]

Not true. curious so iv just done some testing with my 13 gen i7 13700k, set to the file to 8c8t and 4c4t . works fine. you can see 8 or 4 cores are limited with matching threads taking load, difference being that the 13 gen also adapts to off load other processes across the "e cores" iv recorded the testing.. il make an updated video in the next few days.

[@defnotatroll]

@@SgtDrayke nice

[@SgtDrayke]

Update kzbin.info/www/bejne/jKaTk4FrjJKVrpI

[@FerhatKustasVEVO]

im playing nfs unbound , the game uses %80-%90 cpu but doesn't use gpu. how can i fix this? i5-13400f rtx 3080 ddr5 16 gb ram

[@SgtDrayke]

@@FerhatKustasVEVO see your other comment on the other vid

[@QuackShac]

I have a ryzen 7 5800, should i use ur updated video or this one?

[@SgtDrayke]

So that's an 8c16t base 3.8GHz boost 4.7GHz. Just use the 4 core. More than enough. Ryzens run hot anyway.

[@ABOLFAZLGAMING1]

Bro help me pls I do this method but didn't work and in heavy moments my game freeze and load slowly 😫 😩

[@SgtDrayke]

it wont work for everyone. as long as you followed it, no spaces or extra characters/letters in the file. its named and saved right then it should work. but sometimes it just wont.

[@ABOLFAZLGAMING1]

@SgtDrayke I play RDR2 40 60 fps but in Nfs heat you can see lags and now I hats nfs I will install FORZA HORIZON 5 is it good to install?

[@SgtDrayke]

@@ABOLFAZLGAMING1 so staying you play rdr2 at 40/60 means nothing to me. It's meaningless info . You could be playing it at 640x370 minimum settings at 40/60 FPS. Modern ea games are poorly optimised so it doesn't matter what other games you play it's still poor. Don't own FH5 so wouldn't know.

[@johnwinchester8911]

I have intel i9 13th gen 13900k . Can I still use same as yours? Or it's specific to whatever chip you have?

[@SgtDrayke]

So the general rule. If you've got a modern (5 or 6 ISH years) base clock 3 GHz then you can easily run 4 cores. Or if you don't mind a little more CPU heat the 8 core. But 4 cores at 3.5 or 4 GHz is more than able. I run the i7 13700k (lower spec than you) and my settings are in the description. Which should* work. * Being that not every CPU or system is tested or can be guaranteed. For some it just doesn't work. Could be anything from vendor game version to system drivers.

[@AGBRIELMO]

I am reaching 96ª on dell g15 laptop, even on low graphics, NFS UNBOUND, i will test this today

[@SgtDrayke]

a laptop even if it is a gaming one. turn the game settings down and half the res to reduce heat. or play at max and accept it will cook you

[@aeronofficial]

Hi! Great video! I just installed the game to play again. For some reason, I just can't seem to find the Origin folder. Any help is appreciated. Thaanks!

[@SgtDrayke]

Were you installed it.

[@aeronofficial]

@@SgtDrayke yea. checked my game drive but it wasnt there. but heat folder is there 😓

[@SgtDrayke]

@@aeronofficial yeh you make it and add it.

[@mammon7868]

I have 8 cores and 16 threads, so it’s 8 8 0 0 16? I saw another video and it says the last one is your threads

[@SgtDrayke]

No bud. Just do the same as one that's in the video description.

[@PoweredPixels1]

Might this work on steam aswell? I get 20 fps on the game even after trying the fix but i saw we have different files

[@SgtDrayke]

Some have said It doesn't work with the steam version. Some have said It does,

[@johnlawrence6484]

It is a stupid question but should I save both files in my document nfs forder and nfs origin folder?

[@SgtDrayke]

@@johnlawrence6484 not a stupid question. No such thing as a stupid question. Youl never know the answer until you ask. So no you don't . The file should go in your games exe directory I only had it in both for testing . Note though that steam will delete this file if you do not encrypt it . So it's good to make a copy.

[@johnlawrence6484]

@@SgtDrayke Thanks man, though it is not working on my laptop it still hitting 80+ degree when playing nfs heat maybe this is a lap top problem with an i9 processor, even though my laptop power plan already edited the power management lower that 100 and also I turned off the turbo boost but it's only working on games outside steam haha.

[@SgtDrayke]

@@johnlawrence6484 yeh so laptops are a whole different ball game. They run stupidly hot regardless. Simply put the game into window mode. This should then run the game in a smaller box. (Which you can resize with the mouse pulling the edges) Whilst in window mode you can alt tab out and open task manager. So closing and opening the game with and with out the file you be able to see if the file is working. You need to make sure you have the correct spelling/spaces in the file. Including the end " .. also if it is the steam version when saving in the save as options window select encode file. Run the game a minimum graphics and half resolution like 720. See how it plays and the temps. Then increase options. Keep distance draw and environment low.

[@bassghe_]

idk why it doesnt work in my unbound while its work in my heat any solutions?

[@SgtDrayke]

@@bassghe_ I don't either.

[@emirhankuru9866]

i have 12th Gen Intel(R) Core(TM) i3-12100F 3.30 GHz CPU, what should I write 4 or 8 in ProcessorsCount ? (on user.cfg)

[@SgtDrayke]

So on the Intel site searching the chip youv stated says it's a 4c8t . So just use the setup in the video description.

[@oDxrky]

I have i7 13700k. What should be the value for the config?

[@SgtDrayke]

@@oDxrky just use the same as the video.

[@Papa_Hugo]

Usefull, thnks !

[@SgtDrayke]

👌 np

[@ichramsutanazhbar9465]

Hey bro, that's a good and simple video but i kinda confused cause i play this game with i3 6006u (2 core and 4 thread). Can i use the same method with this ? so that cpu usage just 50% Thread.ProcessorCount 2 Thread.MaxProcessorCount 2 Thread.MinFreeProcessorCount 0 Thread.JobThreadPriority 0 GstRender.Thread.MaxProcessorCount 2"

[@SgtDrayke]

Hey bud. So in theory yes. But.. when I was originally testing below 2 core the game became unstable. But by all means it looks right. Test it. If it doesn't work the game simply won't load you can just remove the text file.

[@ichramsutanazhbar9465]

@@SgtDrayke yeah, i just test it, but with same cfg like in the description (4 thread not 2) and it work. Now cpu temp 72 C with your method, Before that, it hit 79 or 80 C. I don't know how much cpu temp will decrease, if i use 2 thread, but i just choose what you recommend. Thanks for share this, appreciate it

[@SgtDrayke]

@@ichramsutanazhbar9465 chewwwww. Good to hear. Although 72c is still suuuupppper 🔥 hot. Laptops need cooling. Laptop screens around 15inchs if it's 1080 you can just run the game at 720. It will reduce the demand on your system. Look just as good.

[@ichramsutanazhbar9465]

@@SgtDrayke Well i always use vacuum cooler when i play a game, and i just reapply thermal paste this april, i don't know how to make it cooler again, so i just play a game in a short time. But i don't know why, before i reapply thermal paste my gpu temp hit 92 C, after that 83 C while gaming, but the problem is my cpu temp increase 5 C, i think. I kinda worried cause my cpu temp going hot as gpu I think i use 1366x780 resolution, kinda forget, i'll try it later

[@SgtDrayke]

@@ichramsutanazhbar9465 what GPU have you got? So Laptop design always had a single heatsink acros gou and CPU, this means heat from one effects the other. That and low profile heatsinks can't displace heat efficiency added with the smallest blower fans limited air volume etc. in short laptops aren't for gaming unless you spend top buck £1000 plus on a dedicated gaming laptop.

[@RIN-vr8dq]

I got intel i5-10400 which has 6 core and 12 threads should I use 6 instead or 4?

[@SgtDrayke]

Just use 4. 👍

[@ashendb9855]

Which one is better for this game i7 12650H with RTX 3050 6GB (45W) or i5 12450H with RTX 4050 6GB (45W)

[@SgtDrayke]

Well sounds like you need to do some research and compare them. One CPU is better then the other but only fractionally. But in the mobile CPU work it can be a big difference in price and performance. The GPUs are the same story. The one will bring better/newer features over the other but at a cost.

[@goldentamaro1987]

Idk about my laptop but with 8 GB RAM is totally make my game is crash and lag, I want to know how to manage or fix it, it's bit confused for me how to do it dan can you help me

[@SgtDrayke]

It's actually like the video. Select and copy the text in the description from the first word of thread to the end quotation symbol. Paste it in an empty textpad document, save as name user.cfg . Then place it in the directory same as the video. In terms of memory. The game can run on 8gb. But being a laptop youre memory won't be as fast as a desktop. Also if you have a lot of programs running in the background like browsers then you won't actually have 8gb available. O/s and chrome alone will use 1.7 to 2.4gb Ish . Run the game in a window half the resolution of your monitor. This will help reduce the games demand.

[@goldentamaro1987]

​@@SgtDrayke hey it works but I can't play high graphics so I don't have to work about crash game, thx man

[@SgtDrayke]

@@goldentamaro1987 yeh laptops won't like that game in high mode. Even dedicated gaming laptop will struggle. Good to hear

[@psychogenius-asf]

Hi.... Where must I copy the file to 😢 5:09 ...

[@SgtDrayke]

5:15 in your game directory

[@malefic845]

How about an I5 10400f with 6 cores, and my GPU is a gtx1650.

[@SgtDrayke]

Just go 4

[@babyamats777]

what if may laptop is only 6 cores? do i still need to follow your steps?

[@SgtDrayke]

depends if it is 6 cores 12 threads, or just 6 cores. you can also set the file to 4 cores, which would still help.

[@babyamats777]

can u help me? my laptop is ryzen 5 5500U rtx 3050 24gb ram my cpu is 100% but when i did your fix it became 80% but the cpu temp is stable at 78-80 degrees.. please help me sir

[@SgtDrayke]

@@babyamats777 6core 12thread base 2.1Ghz, Tm4.Ghz. should use the 4core Config but youl still struggle with heat. More so being a laptop. 3050 isn't a great GPU for gaming but good for office/creative work . Not really intended for gaming, they are sold as gaming but just not.

[@babyamats777]

@@SgtDrayke can i still play the game with all that heat? please help i paid for the game, im just concerned for my laptop to be broken by playing for hours in heat

[@SgtDrayke]

@@babyamats777 to be fair you purchased a game you should check the min requirements stated to run the game before you get it. I don't know your device and all it's components. And sure it could run the game But to what level or ability I have no idea more so with a laptop.

[@babyamats777]

@@SgtDrayke what should i do to play the game with not ruining my laptop please help sir

[@SgtDrayke]

@@babyamats777 i don't know. Try reducing resolution and graphics settings . Will make it more stable.

[@alexzockt3662]

i try it in Unbound with my 5800x3d but it only give me -3. From 80 to 77....

[@SgtDrayke]

@@alexzockt3662 right well I can't explain why that would be the case. I don't know your device and how you have it running the game.

[@alexzockt3662]

@@SgtDrayke 2560x1440 with RTX 3080 all on Ultra und DLSS Quality. When i play it goes up to 80 degrees and this settings not realy works, only 1-3 degrees maybe... Its for unbound the same or?

[@SgtDrayke]

@@alexzockt3662 so youv only told me the GPU and your res+settings. What CPU are you using? Also don't run heat or unbound with terrain above medium/hight and post processing above high.

[@alexzockt3662]

@@SgtDrayke Ryzen 7 5800x3d

[@SgtDrayke]

@@alexzockt3662 ok respectable. 8 core, base clock 3.4. So reducing terrain will reduce CPU load . So will post processing and AA. I personally have terrain reduced to the minimum which makes the game load quicker too. These CPUs and AMD in general will always run hot. It's just how they are compared to intel even with hydro coolers.

[@kuzumo398]

I have ryzen 5 3600 what should be the value for the config?

[@SgtDrayke]

@@kuzumo398 run 4c

[@kakashi99908]

What is it even doing with the cores that draws so much power?

[@SgtDrayke]

A lot of things that amount to nothing other than a ready state.

[@xelseartheonlyone1267]

I can't find the user cfg file. I play it on steam.

[@SgtDrayke]

There won't be a file, so make it, also make a backup of it as steam some times removes files during verification.

[@xelseartheonlyone1267]

@@SgtDrayke Thank you, i already did. Sadly no big improvement. I will try some more things, if it doesn't work i will upgrade hardware. Thanks.

[@SgtDrayke]

@@xelseartheonlyone1267 yeh so this file will only really help if you have a mid range to high end cpu. so say 6 core plus that clocks 3ghz plus with high temps. the aim is to reduced the number of cores the game uses which inturn reduces the heat. so if you have a small core count or its like a general laptop it wont benifit you.. also the negative side to reducing cpu core count in the game, is it can negatively affect your graphics., data being processed between hardware. an 8c 3.2ghz with rtx2070 + runing on the 4core config should run well at 1440 60fps. on a 16c 5ghz like mine limiting to 4 cores would not only run very well. but also my system would stay rediculusly cool, and the game doesnt need more than 4 cores . the expected and actual result will be different for everyone.

[@FastasNeon5399]

Thx it works no it's 40 to 60 but i need to know the usage of gpu normal 100% but he has stable temp at 76°

[@SgtDrayke]

@@FastasNeon5399 you can use hwmonitor (free version) to monitor your hardware load and temps. If you only have one monitor you can either put the game to window mode and alt tab or just full screen alt tab (this will minimise the game which will change the hardware load. But you will be able to see the hwmonitor history. The more you limit the CPU usage the less load less heat but also less frames. So depending on CPU you just need to find a balance. As I have a high frequency CPU I just use 6core. For graphics card load and graphics card heat you medium graphics settings and turn of/ low. Particles and environment assets (I can't remember the option name)

[@fiyziq7070]

how about 8 cores 16 threads? Is it the same? Im using on laptop btw

[@SgtDrayke]

Same CT count as mine so just copy the same.

[@Jokada_]

umm hello sir i using ryzen 5 3500 6 core 6 thread how much ineed to put in cfg file?

[@dzikrikhairullah2859]

My PC's proc using Ryzen 5 5600G, have same cores but different thread. i suggest change MaxProcessorCount from 12 to 6. If you need example cfg file, here's my user.cfg: Thread.ProcessorCount 6 Thread.MaxProcessorCount 6 Thread.MinFreeProcessorCount 0 Thread.JobThreadPriority 0 GstRender.Thread.MaxProcessorCount 12

[@SgtDrayke]

Thanks

[@SgtDrayke]

What Dzikrik said

[@berrymycawkner]

Thanks bro went from 93->56

[@berrymycawkner]

Also I have a i7-14700k should I up the cores to 8?

[@SgtDrayke]

Chewwww..... Nice. You should see you whole system temps drop (internal air temps which also affect hardware heat soak)

[@SgtDrayke]

@@berrymycawkner you could go 8. But to be honest I'd say use 4 and see how you go. Youv only got 8 performance cores within 12 being efficiency out of total 20. Your top clock on performance is 5.5/5.6. efficiency is range of 4.3. so 4 of either that you system uses youl be 4.3GHz to 5 GHz . Plus the fact that's modern architecture (PCI lanes) 4 is More than enough. But if you have head from for a little more heat and cooling 8 would be ott.

[@MrAndrejohn]

bro, yes, the game runs smoother but all the data got reset bruh. i was level 50 bro.

[@SgtDrayke]

Duno why. Has nothing to do with your game saves or data.

[@Pr0Str33Tz]

I have a 5900x, does it make sense to go for 6 instead 4 ?

[@Pr0Str33Tz]

I completed Unbound without knowing this, and i always hated that my cpu was maxed out. smh, if only i knew this earlier xD

[@SgtDrayke]

4 is pretty much all you need. No harm going 6 see how you get on.

[@kqzero]

did not work for me, does anyone have any like tips

[@SgtDrayke]

@@kqzero it might not for everyone. Just double check the file has actually saved as a cfg and the contents are correct no additional characters. Worth noting that the steam version does have issues. Steam may also remove the file when validating.

[@nishadidissanayaka1605]

Plz. Make a video about how to fix fps drop in nfs heat

[@SgtDrayke]

Il look Into it bud. Depends if iv even still got it installed 😂

[@SgtDrayke]

Il look Into it bud. Depends if iv even still got it installed 😂

[@destinyD423]

I have intel i5 7440 HQ, Should i use this config or not?

[@SgtDrayke]

What is your CPU Core/Thread count ? desktop or mobile?

[@destinyD423]

Intel 7440HQ Laptop 4 Core​@@SgtDrayke

[@SgtDrayke]

@@destinyD423 oh well that's a bit more difficult. putting the file to 4c wouldnt actually help you in any way. and putting it to 3c wont work, being a laptop "mobile chip" these do get hot, and are not intended for gaming especially any EA nfs games.

[@destinyD423]

@@SgtDrayke I'm putting 3c doesn't worked But I'm put the "GstRender.Theread.MaxProcessorCount" In 4 is okay?

[@destinyD423]

@@SgtDrayke I'm also limiting game Fps to 32 in Nvdia Control panel So that the fps is more stable

[@ianwastakenxx]

it doesn't work for me, I only get 100% cpu at the beginning intro and some cutscenes. only normal when free roaming. tell me another way to fix it 🥲

[@ianwastakenxx]

also, it's run well on my laptop here my spec cpu i5 1335u gpu intel iris xe 4gb vram ram 8 gb (7,78gb usable) 512 gb ssd

[@SgtDrayke]

Doesn't work for everyone. Double check youv not added or missed any text, symbols spaces.

[@ianwastakenxx]

@@SgtDrayke should i change some values?? I had 10 cores, 12 Threads

[@SgtDrayke]

@@ianwastakenxxjust copy mine. 4 4 0 0 4 . It's the same as the video description just copy paste the section.

[@ianwastakenxx]

@@SgtDraykei've already doing that, but sorry that's doesn't work🥲

[@Secret_drp]

i dont have this folder

[@SgtDrayke]

folder? or file. make the file

[@skirdle001]

will it work on intel i5 7 th gen 12 gb ram ssd 128

[@SgtDrayke]

@@skirdle001 can't guarantee anything. Give it a try. If it doesn't work just simply delete the text file.

[@Budi_sampurna]

My thread cpu 12 can i 12 in config?

[@SgtDrayke]

@@Budi_sampurna just use same as mine at 4. And then if your happy with the temps and want to try 6 then up it.

[@Budi_sampurna]

@@SgtDrayke WHY IDIDNT HAVE USER.CONFG

[@SgtDrayke]

@@Budi_sampurna clearly haven't watched the video or other videos relating to this file fix.

[@arnolddanielabate4152]

just in case if you have intel check if you have turboboost active , just turn of and you will get better temps

[@SgtDrayke]

Turbo boost? For what for the intel CPU . I would NOT recommended this to anyone.. anyone who chooses physically downgrade their hardware through bios settings to play a game should just uninstall the game and not bother. The turbo clock is there for a reason allowing your CPU to perform better per core and with the rest of the system.

[@arnolddanielabate4152]

@@SgtDrayke you just have to put it of , is not mandatory to use it , dat overheat and just upgrade like 2 or 3 fps , and actually you dont need tu get inside bios to turn off.

[@SgtDrayke]

@@arnolddanielabate4152 each to there own. But personally I wouldn't bother.

[@arnolddanielabate4152]

@@SgtDrayke np , i hope ya have. A great day :)

[@louisfallesgon5580]

what if I fot ryzen5 3600 what should i put

[@SgtDrayke]

Just put it to the same as mine.