Sh*t I Never Knew: Bedline All The Things

[@SpiralDesignWorks]

Nothing says "Im going to take it out in the woods' like chrome 20's or 22" with low profile mud tires.

[@tntproductions2504]

Lol you right 😂😉

[@Blackhouseohio]

Hahahha!!!

[@ForesakenVengance]

For real, I won’t run bigger than a 18 on a 35 for wheeling

[@BLACKCLOUDFORD]

24"

[@AngelHernandez-ex7ji]

I hate trucks now a days . Some even have camber 🤦‍♂️

[@alexanderbarrera9140]

Damn man, i hate being poor

[@crackedblock2264]

If you do it yourself it's not too terrible

[@rhllnm]

Fuck em - Harbor Freight bed liner. Getting it for my 78 LUV. Inside and out.

[@kirbyroad5743]

I don't own any trucks worth a $2,000.00-$3500.00 paint job. It looks decent but nope I'd rather spend that kind of money on drivetrain to get me where I want to go. One trip to my cabin and that paint would look like shit. Of course those rigs wouldn't get to my cabin. My old roads would beat the plastic off that avalanche and the hummer would drown in the river crossing.

[@01100101010100110010]

That's the only avalanche ive ever seen that I didn't hate

[@alionintights4074]

I still hate it

[@Trd2020]

Alion In tights your an idiot

[@joshharmon4867]

I see some I don't hate every once in a great while.

[@chevyman882]

Same, I caught myself thinking "wait, do I like avalanches now?" and then had to snap back to reality and remind myself this is a 1 off that looks good.

[@evanlove3015]

I don’t like this one

[@pepboys93]

Black wheels on that Hummer would look badass!

[@vinskeeter]

Blacked out head lights are so bad ass!

[@joshmaclachlan9183]

I did my 1995 Dodge Dakota 4x4 in a roll on bed liner type and it looks really good!! just got to finish up a few more things. stupid dodge paint was coming off everywhere!! now it's looking amazing...and it was done for about $60.

[@crazynuts-bj9on]

Josh Maclachlan where did u get the stuff to do it at ? looking to do my dodge 2500

[@joshmaclachlan9183]

I actually bought mine from Walmart...I put two good coats on. I'm going to do a couple more coats soon. definitely cheap and easy...buy the kit. its actually cheaper that way.

[@crazynuts-bj9on]

Josh Maclachlan how many gallons do u think it would take to do my ram 2500

[@joshmaclachlan9183]

I would say 1 gallon...but it's always better to have extra around. plus make sure you sand and clean your surface REALLY GOOD... also make sure it's not to hot...try to apply in a vented shaded area...then let it out in direct sunlight to dry.

[@crazynuts-bj9on]

Josh Maclachlan I have it primered and ready for paint just looking for ideas to make sure it lasts. Country roads and stuff

[@Kaelland]

I actually like the engine compartment in the Hummer still being yellow. It pops really well.

[@OttoMatieque]

give a caterpillar vibe

[@kurtisroberts9744]

Plastidip comes off easier and easier the more coats you apply... if you do less than 4 or so coats its a nightmare. The thicker you put it on the more durable and easier to peel.

[@sharkparty1027]

Yeah, the dude was a complete tool who was too stupid to do even a little research before dipping his car.

[@vicsrt1098]

I really like the look of bolts around the fenders 👍🏼 nice custom touch

[@waynes.2983]

bedliner can stop bullets. Try coating a piece of half inch plywood with a few coats and then shooting it with a .22 or a 9mm. I'm serious. Make your own armor before shootouts with your enemies. It also works great for coating metal tins of ganja before boxing and shipping them to far away places. There's a couple helpful tips for you folks out there.

[@ThereIsNoGodOnlyUs]

You're a special kind of stupid, son. While Line-x doea have a formula that is used in shrapnel and blast proofing/ bulletproofing, it is in no way available to civilians.

[@michaelwilbourn1763]

Lol bedliner, raptor liner, line-x and all of that is available to any “civilian” out there

[@thisperson4967]

Joey is a special kind of stupid lmao

[@isaacc3307]

I got a special kind of dick

[@Samsam-ku8dr]

I live in Nevada, what is rust??? I have never heard of that before

[@jeffreyyeater1780]

Lucky you . salt puts your life on hold for 4 or 5 months every year . unless you want your cool stuff to rot away in front of your eyes .

[@Lonewolf23-26]

@@jeffreyyeater1780 fluid film is your friend when you live in the northeast, just gotta deal with the smell in your mustache

[@kevinlivingston9563]

1:31 We always called it chasing the dragon. Come to think about it, that was a totally different thing. Forget I said anything.

[@1nkr3dibl3]

"I still don't have any finger tips" this had me lol. I know the struggle man. too funny

[@juniorlemke5484]

To get plastidip off you just spray more on top, let it air dry and peel it off.

[@ibetrollintheybehatin6857]

So... I have a massive amount of bolts, hex cap head bolts and lots of bad ideas. Do you think I should just start drilling them into me vehicle, so much where someone will think I'm unique and totally rad?

[@GotScout]

But did you line the BED?

[@OttoMatieque]

doh!

[@ganon420]

Why did you not replace that front fender that was rusty before you sprayed the bedliner?

[@D25864]

I'm going to do this to my Aztec. Shits going to be FIRE son.

[@dtchevy7317]

I woke my girl up, lmao😀😁😆😂🤣🤣🤣

[@tylorhughes4484]

Not gonna lie i kinda wanna see someone do an aztek build. 4x4. Lifted. Lockers. Overland setup. Just for shits and giggles.

[@RJSOONER24]

Siri, report this to the authorities!

[@bryan50324]

The hummer color is on point.really awesome!

[@JoseSanchez-wd8im]

should I do my subaru wrx in this and lift it? I'm really considering it now lol

[@SMcFarland]

that sounds amazing

[@JoseSanchez-wd8im]

Exhilarating Bass that's not bad lol I bought forester suspension for my wrx and right now I'm trying to find away to make it fit in the front

[@eeiichill]

sweet, how many coats

[@jomjones5242]

Liutenant General hope it’s a legacy wagon you’d have to open the hatch to get her fat ass in it

[@constitutionalrepublican1611]

Jom Jones nope, the sports sedan. She ain't that fat tho she looks good. I'd def throw her around all night. Hoping not to crack the dash like my 91' lol

[@TheCanes1219]

first off, I am subbed to you're page and have been for a while now. But I thought that you you were so wrong about plasti dip analysis and I'm so happy that Fonzie from DYC did a response video to what you said. I have a DYC Kit and it works great if you know what you're doing but if you didn't put on at least 6 or 7 coats, then it won't peel right.

[@TheCanes1219]

Custom Offsets you need about 8 coats on that big truck and 4 gallons aren't going to give you 8 coats. you needed about 6 gallons not 4. I used 4 gallons on my wife's 2012 Honda accord. You did it wrong brother and this is why you had problems. I'm going to buy my wheels and tires from you guy's when I finish my 1984 k10 Chevrolet Silverado and as long as you're product is good, I'll defend you against anyone who doesn't give a correct answer about you.

[@TheCanes1219]

Custom Offsets just go to Dip your car and click on the DYC channel

[@LOU2U2]

I've sprayed over 1200 vehicles and a few water using linex/max, a talented sprayer like myself can fill in and over swirled or sink-ins, with fillers or cake on with no issues 👍

[@Dwillis2024]

Awesome video. I had no idea it was that cheap to have it professionally put on. I'm going to look into having my Jeep done. Thanks.

[@doorguner01]

fun fact rhino liner/lineX etc was developed for armored military vehicle i.e tanks as a spall liner to stop fragments from chipping off and injuring the the crew inside,from a tank round even if it doesn't penetrate it,the impact fractures off small pieces of metal from the inside of the steel armor the harder you make the steel the more brittle it becomes!

[@kregadeth5562]

terry jenkins awesome!!

[@isaacc3307]

FUCK your fun facts BITCH

[@StinkyWeiner]

yellow engine bay looks dope

[@tcbkkb1]

Anyone ever tell u that u sound like Jesse James....

[@shiftymg3590]

I coat almost everything that I have around the house that is plastic. Everything from my solar panel for my motion lights to to the roof on my dog's house. Pretty much anything exposed to the nature's elements. It works wonders.

[@leebourgoin1528]

Thanks for this. I've been thinking about raptor lining my frontier olive green. This helps in making that decision

[@CustomOffsetsTV]

Glad we can help!

[@Someonehad2sayit]

Not digging the huge rim and Rollerblade tire look on a 4x4..fine for mall crawling, but...

[@Blackhouseohio]

Everytime I'm looking up ways to make hard jobs easier for my truck.. I end up watching these videos while my project sits there. Stop distracting me Custom Offsets!!

[@CustomOffsetsTV]

Sorry about that man, thanks for the love though😂😂🤙

[@aekuterbach1]

I'm going to do my 99 Corolla in army green in this stuff cause she's a tank.

[@MonygyB]

“Even though you paint over it, you’ll still see scuffs.” It’s a truck, I’m lucky I don’t have a dent the size of my torso in mine... yet ;)

[@tfrost33elkhunter]

Did they pull the cladding off the Avalanche before spraying? You know, to get underneath the cladding... thanks Tony

[@CustomOffsetsTV]

nope, sprayed right over it

[@seanc6468]

I like the solid sound of the closing of the doors.

[@DocFeelGood4]

Bed lined Chevy avalanche and H2... both with large shiny rims. Don't hurt your pretty mall crawlers. Better bed line them so no one scratches them with their doors in the parking lot.

[@4evrthugn]

“They said about the same price , Then 💩 got really weird “ lol

[@ExtraFungus]

silly mall crawlers.

[@claytonatkins6058]

Josh Bishop round here we call them pavement princesses lol

[@lambo-gr1yd]

Dont forget about the term patio piece!

[@CuttinChris]

tricers "truck ricers"

[@abeabe9000]

Pavement princess >>>

[@Trd2020]

josh bishop I bet you those so called mall crawlers can off-road just fine

[@Slobberdog66]

Both vehicles look poorly done. Maybe if it had some huge bolt heads on the fenders.. Oh wait.

[@justinspiguzza5276]

If I wanted to customize my truck, I'd drive right by that shop after seeing the poor quality and horrific looking customization done to those displayed vehicles. Especially the Hummer with those dorky looking tires/wheels. Tires are bowed out because of the completely wrong wheel width. The wheels stick out further then the already stretched tires. Bad taste. You don't do cheap upgrades on display vehicles. More importantly it shows the style they like which is almost funny looking

[@136Reid]

Could the bedliner stop rust from coming through that wasn't already there, though?

[@CustomOffsetsTV]

It should help slow down the rusting process quite a bit yes!

[@hojo70]

I'd love to have this done to my Tundra

[@johnn73]

I did my entire truck with scorpion liner myself about 4 years ago. It's holding up well except where the rust is coming thru in wheel wells. I thought same, grind it down and then cover with rustolem rust inhibitor plus the Bed liner. Wish I would have done it correct the first time lol

[@Keixer]

John N I was thinking if doing the lower portion of my 09 Dodge Ram because the paint is starting to come off. Since I am a newbie to this type of stuff I thought sanding off the rust and putting down a primer was the right way to do it. Any suggestions on what I should do differently so I can say I did it right the first time?

[@ScottRGarcia123]

Where is the C.O. Garage located? Appleton? Looks like IL. in the background.

[@CustomOffsetsTV]

Offsets Garage is located at our showroom location in Appleton, WI!

[@GraphicJ]

What is the best Bedliner spray to spray my bed? - Is it recommended or beneficial to spray it with the cans or buy a new bedliner? For a Chevy 1500 short bed.

[@CustomOffsetsTV]

Your best bet would be to talk to a local body shop or check out some forums and see what other people are using for bedliner on their trucks!

[@64maxpower]

That looks really good. Zip But your Avalanche is a good looking truck to begin with

[@df8768]

Plasti dip done correct peels very easy.(u probably didn't apply enough coats) also dip remover would have saved your fingers. And plasti dip done right is smooth like vinyl . Auto flex done buy a professional is the best liquid wrap. Gas resistant. U can cut buff sand and wax it . Most who try dip as a diy project have the same issue u did.

[@ck_customs4383]

Great video! What do you guys use to protect body paint from rock chips?

[@Clutch_Kick187]

xpel makes a clear wrap that i have put on the front of my truck and down the sides of the rockers due to my wheel offset.. it is some bad ass shit..

[@ck_customs4383]

alright thanks ill check it out!

[@kyleengelke7321]

Chip gaurd. Or under coat. You can get it in a can 9 bucks a pop.

[@kristykoprowski3737]

I wonder how much it would be for my 09 Chevy silverado 1500.. I love the full bedliner look and living in Wisconsin you kind of need it!

[@mysteryman6977]

Some of these comments people are such haters and so jealous it’s unreal. These look really awesome but you can do this a lot cheaper also $2000😖 naw more like $3-$500 if you do it yourself he is promoting a friend evidently. Good video though ty

[@timmcwilliams8024]

great vid! thanks, what about UV? will it fade? or any idea how long will it last in the Florida sun ? any maintenence to protect/delay it from fading?

[@freedomlover8525]

just wondering if you took all that plastic off avalanche to but the liner on?

[@CustomOffsetsTV]

Gabriel Estes you mean the plastidip? Yes. If you mean the plastic panels? No we linered right over them.

[@19RORABOUGH90]

Do you ever liner the frames/fenerwells/ etc of vehicles? Video? I've done it on my last F150 but not on my 13 Fx4 yet.

[@ImpactedWorld]

When plastidip isn't coming off, it is probably due to it not having enough layers of it painted the first time. ALSO: Dip dissolver from DipYourCar.com works great + power washing.

[@KRoDz-rd4ec]

Great video! Thanks for the detailed info. 🖒👊✌

[@levi_fishing]

How would that hold up to scratching? Id like that on a hunting rig that i take through the trees and get some nasty scratches.

[@CustomOffsetsTV]

It would hold up well and you could always spray over scratches

[@acedogg692005]

I don't understand the bolts... I would take string and wrap it around the bolts and go all around the truck so you couldn't get in lol

[@RexWort]

Does it protect against scratches and dent if some jerk swing their door against your car or have their keys swinging against it?

[@CustomOffsetsTV]

scratches yes, dents is a yes, until a certain point of force

[@billfrench3277]

what are those giant bolts holding on?

[@paint3ball]

Bill French engine mounts? Lol

[@CuttinChris]

that there's a truck ricer lol

[@rottiesdad]

Bill French douchebaggery. That's what they're holding.

[@nickp3871]

They’re holding the fact that he has never taken it off pavement

[@hartzland7658]

Holding on ' I'm a wanker show pony' sign under the guards.

[@harleyhogue27]

Hey Shawn, do you know if there is any difference in fuel economy with the bed liner? Thanks, those vehicles look great!

[@harleyhogue27]

I figured that. Thanks for the reply.

[@lifeisgood7701]

I have an H2. I want to get it done with bedliner, but I want it to be military green. How much would it cost to do it? One place here in Louisville KY was going to be 10,000.

[@sudburyhouse]

I had them spray inside the doorrs and the ruff. Hahaha yall corn fed boys!

[@jameshurd8657]

What are your thoughts about using it on a flatbed trailer for the exposed wood floor?

[@CustomOffsetsTV]

You could definitely do that!

[@TreyPerryWx]

Does this typically last the life of the vehicle?

[@CustomOffsetsTV]

Depends if you constantly sit right behind a dumptruck and take rocks to the front end, no. If you drive normal stuff, not tree banging it yes it will last a long time.

[@ktcgarage8572]

I used monstaliner on my Trooper I love it Cost me 4-500 and I did it all myself Best liner out there IMO

[@bearskinner2601]

Where is this shop at that did these paint liner jobs?

[@TheLinkMedic]

I think the yellow in the engine bay looks kind of cool

[@bcannondale]

I saw a neighbor line-x his old truck (standard black color) and it looked good for about a six months but then it started to fade quite a bit (lots of sun in South Texas). The durability is great; he takes it offroad and through the mud all the time and you can't see scratches/etc. How does yours hold up to the sun-fade?

[@dhadamsoffice]

Am thinking of doing an Astro van to convert it into more of a photo blind for nature photography. Need something without too much glare but don't want to go all rambo with the camo. Thinking dark green. Any way to get more on the dull side? Am in WI with the harsh winters "up north."

[@CustomOffsetsTV]

oh yeah, you can have matte finish.

[@alexanderbarrera9140]

Don Adams you can gorrilla glue tree branches and animal furs to your van

[@Danielo197]

That avalanche looks bad ass

[@raygomez3203]

Who's f150 is that in the backround? You guys should do a video on it.

[@stihlms]

Shawn, those wheels are sweet. nice job on that build👍

[@cbishop41483]

I put bedliner on my wang, and now it's bulletproof!!!🤣 The wife says its the best mod ever, and I'll never have to worry about RUST!!!!!

[@ramsestenochtitlan6687]

Potato Head and all?

[@edwardgreshii7194]

Looks cool.

[@noneofyourbusiness7594]

plastic dip comes of easy with goof off sticker remover and a pressure washer

[@papic03]

Orange citrus cleaner works too

[@juniorlemke5484]

Or more plastidip.

[@stevenedwards4470]

Is that stuff technically flexible? Can it withstand movement if you sprayed something that would see some action?

[@CustomOffsetsTV]

I mean if properly prepped and sprayed I'd assume so to an extent

[@TeamStevers]

This guy dresses like a Metal Militia guy from 2002

[@boblafountaine9560]

grape ape what are you, the fashion police? It’s a damned video about alternative vehicle coatings dude! Chill!

[@alexgaribay7794]

So, a douchebag is what you're saying?

[@kregadeth5562]

Charli’s Channel yahhhhh jeans and a black hoodie!

[@JakefromSF_NM]

Xline wanted 7000 to do my Hummer h3 I'm definitely gonna check out viper

[@Gdunlap331]

Does the bed liner stop or prevent rust better?

[@CustomOffsetsTV]

It can slow it down but not completely prevent it.

[@Gigantortacoma4x4]

Does the bedline material add any noticeable weight to the truck or Hummer is the spray thick ?

[@frankling.robertsiii6811]

How resistant to wear and tear is the bed liner sprays?

[@TwistedEngines]

I'm up in greenbay . What shop did you go to

[@lucasthiel5366]

Gives it a tough industrial look

[@freemenownrifles8814]

Is it bullet proof? Perhaps Son, but return fire just in case....

[@nickpoppa999]

Is the Scorpion liner holding up well? does it fade etc?

[@CustomOffsetsTV]

Doing stellar Nick! The black one fades a little bit over time, but the hummers is holding up exceptionally well!

[@tonyhollinger6515]

I want to do my 2018 ram where can I go because in Canada it’s about 8000 for line-x and it sits rough looking

[@isaacc3307]

Man don't fuck up a brand new 2018 with a nasty ass bed liner paint job Wtf? What are u in high school?

[@KUBBI7488]

looks pretty good ! i ll do my 2015 tacoma some day

[@pudgylittlehamster]

of course plastic dip is hard to remove if you don't add several coat

[@DrTopLiftDPT]

Custom Offsets - Need 5 coats

[@dubltap7216]

Actually 8-10 coats works better. Removes in sheets not pieces.

[@CarnivoreFrank]

my old truck is rusted on top and I'd love to have it completely covered in that liner stuff. where do they do it? my whole truck not worth $2000

[@CustomOffsetsTV]

Any body shop that does bed lining, some may not do an entire truck though.

[@AngelHernandez-ex7ji]

Did mine with for 150$ I have a 92 land cruiser. Just used rest oleum turbo bed liner, all you need is one Sandpaper and a few cans

[@AngelHernandez-ex7ji]

Definitely done see the purpose of spending 2k for some bed liner you can also roll on

[@skotward]

That's the coolest Avalanche I've ever seen.

[@kevingrove4379]

Skot Ward Even bedliner cannot impart coolkkj*iii*7bb7v t yt? Pt9. T5dedpppp on vwut

[@oh-qn6ht]

How are those amp tires compared to the atturo? I'm looking for more of a quieter mud tire.... if that's possible. I've watched videos of the atturo and they seem to be pretty quiet but the amps do look more aggressive. I'm sure anything will be better than the mud grapplers I'm currently running.

[@jonnyherrara2116]

Where did you get the CO Av. at? I just might paint my truck that color

[@57HEMIviken]

what's that add for weight and what's that weight do to your fuel mileage? looks great just curious

[@57HEMIviken]

Custom Offsets wow I thought bedliner was alot heavier than that

[@bigdog3890]

How much would just the bumpers and grill cost ?

[@CustomOffsetsTV]

Best bet is to ask your local bedliner

[@MrJimbo98z]

lol stretched mud tires, ricer tail lights, giant, useless bolts RTV'ed to the body, tow mirrors permanently out, light bars... Yup, this is truck rice.

[@lovesautodetail]

What a dope ass channel.

[@dempseydoodles]

How much would it cost me to get my Chevy 3500HD Diesel truck sprayed with black bedliner? Including underneath and in the door jambs?

[@CustomOffsetsTV]

We don't do the bedliner Dempsey, but if you hit up your local bedliner they can quote you!

[@itssidearm708]

Is there a place you took your vehicles to get scorpion lined? any recommendations?

[@fittlabzk4995]

Does this stuff come off???

[@CustomOffsetsTV]

Bedliner? It will, over time. how you get it off with out sand blasting it we've no idea. But we're sure its a process!

[@ZachWoW]

yoo man why the avalanche passenger side got the tires not digging into the ground mannn

[@ZachWoW]

Custom Offsets it's ight still love the videos ;)

[@bigchungus7720]

Custom Offsets 😂

[@nickp3871]

How did you manage to make it cost $600 to plasti dip that

[@jacobwitter5765]

is the bed liner hard to clean when there is mud on it?

[@CustomOffsetsTV]

nope!

[@4849515057]

How many bottles of bed liner did it take to do the whole truck?

[@4849515057]

What website can you purchase the bed liner by the gallon?

[@dirtysouthtv2209]

Nick Mowry www.monstaliner.com

[@kyleengelke7321]

A whole truck should be roughly 15 gallons A bed is sprayed with approximately 3.5 gallons sprayable. So yeah a job done well would be at least 15 gallons at 85 dollars a gallon professionally.