I Found the MOST AMAZING Klein Tools and Accessories and kitted out my Klein Modbox!

[@JV-wl6ex]

The 4-1 electronic screwdriver you can flip the shaft to where it either is closer to the stubby style length or the way you had it with the normal length format

[@Phillip240268]

As a woodworker i prefer to mount all my tools on the walls around the workshop. Easy to grab what you want . Love your wall setup

[@billburkhart6004]

The Klein rolling toolbox has a factory issue that needs to be addressed. The telescoping handle locks into place when raised but comes loose when moving the cart. Unloaded or loaded, it does not take much pressure to unlock the raised handle on the right side. I returned the handle to Lowes, and they were happy just to switch out the handle. We tried 5 of the four rolling boxes on the sales floor, but they failed to stay locked. Be sure to inspect the rolling toolbox if you purchase it.

[@jasonchadburn1434]

When you do your cut outs it does look amazing, keep up the amazing content love it

[@elmarty4803]

I appreciate the honest criticism of the boxes. You have to make them all your own so it really is a mileage may vary for each user.

[@Drebin2293]

You can probably install one on the cable racks upside down on one of the lower boxes in the stack since those rails look symmetrical.

[@robbiejc]

Another great review. Pretty cool boxes. You have convinced me to get the multi flip socket set. At first I wasn’t a fan but after watching this review I am now.

[@KevinOsborne1987]

Brilliant tool and a great fidget too!

[@KevinOsborne1987]

The 6 in 1 nut driver in metric was on my wish list for a long time!! I ordered mine from Amazon from the US for £25. My new favourite tool

[@stephenbatterbee2065]

Like the two screwdrivers that hold the screws, that a great tool. Also the magnet with the light I would definitely use. I agree with you on the clip in the bottom box seems a bit of a waste. Great video and very informative.

[@ShadowFoam]

Thanks Stephen, appreciate the comment!

[@three-phase562]

Been looking forward to this one. I certainly would go for the Klein Modbox if it ever came over here, I do like their older cushion style screwdrivers, I have the interchangeable VDE version of them in regular and micro size.

[@shiznoroe88]

The shaft on the 4-in-1 pocket screwdriver does flip around either way so that it can be longer or shorter while in use and then store it in the shorter position and then slide the yellow part out so that the tip is recessed and won't poke your pocket.

[@donotrobme9295]

Retractable folding knife from Kline is amazing. Tons of power and control. Love it on Sheetrock, my favorite.

[@CharlieBudge]

Just started watching your vids, absolutely love them! Keep up the great work

[@colinwilson8747]

Another great collection of tools plus a review of the Klein MODbox system.

[@HerselLawson]

I really like the direction Klein is heading with their tools. The Shadow Foam is a great addition to the total kit.

[@tomrowbotham1365]

Sat watching with missus again, thanks as always mate.

[@tazoner94]

Retractable folding knife is great when needing to do slight cut depths and for quick continuos use if needed you don’t have to keep folding and unfolding just for when done with it and easy storage writhing pocket or etc.

[@tonybedford3429]

13:56 Those screwdrivers are perfect for the industrial trailing sockets and plugs 👍🏼

[@jeffheins6624]

I like the feeling of the screwdrivers. Good show

[@johnrevell6684]

Love the gripping screwdrivers, that’s really nifty

[@christopherpengelly9277]

Excellent colour 👍🏻 “love them” ☺️

[@straybaby5835]

That magnet with the light would come in handy!

[@EagleMacCassady]

The Klein 6-in-1 Impact Socket Set Set, first came out as a Klein 6-in-1 Impact Socket nut driver, I have two of them, and I thought about buying the hex drive set too, but don't think I will, I have plenty of hex drive bits for the sizes I would need, I don't used my drill for sockets, I use ratchets for sockets or wrenches, I can feel the tightness with those unlike using a drill.

[@ProwlingHornet]

B&Q: Stanley Polypropylene (Pp) Toolbox (L) 665mm (H) 350mm. You have an insert for the smaller version that fits on the rolling trolley/ workshop but not the larger one which is what I own. Also PLEASE do an Erbauer tool wall!!!

[@tommyfisher1435]

Really nice solution from Klein Modbox, impressive selection of tools.

[@Inigo566]

Just made my 1st order of Shadow foam , can't wait but I feel I'll be ordering a lot more 😊

[@worstuserever]

Looks pretty sturdy, and yes we could do with more toolbox colours. If any one system brought out a variety I'd colour-code my boxes. I heard on UK Tool Talk last week that Makita are finally bringing out a new modular toolbox/cart system later this year, probably similar to Packout; any info on that, Jonathan? Like to see your review when the gear actually appears. Right, now I have to go see how far all my tape measures can roll out before collapsing...

[@neil_bird]

Hey there Jonathan - Finally the episode I have been waiting for !!! I have to say I'm a bit of a Klein product fan. I do like that they have thought about additional accessories that click on to the Modbox system. Main criticism for me though is the price for these... but that will just have to be the hurdle to over come. No alternative compares for me, I'm a big fan of orange. Just have to wait for it to become available here in the UK.

[@neil_bird]

I have a collection of the Klein tools... the tape measure is brilliant ! I also have the non-contact voltage tester with laser distance meter !!! What a gem that is to use.

[@neil_bird]

So much crammed into this episode... hitting the repeat button !

[@neil_bird]

The fast-wind VHS overlay on the speeded up clip... nostalgic viewing, liked that !! kzbin.info/www/bejne/gaLPYoabppyWqNk

[@johnnybebad2384]

Love the videos, Would love to see you do a blue-point tool wall. Don't see enough of them on this side of the pond

[@TheTriffids1993]

As a sound engineer we have a lot of techs that use the bright orange Peli cases, you should do a video and inserts for Peli cases. Also seeing you wrap that cable like that hurt me deeply!

[@goddard337]

Me and my colleagues are medical engineers. We carry our testing equipment for medical devices in Peli cases as well. I would love to see some inserts for Peli cases.

[@JV-wl6ex]

I agree about the cable wrapping. I had to search around to see if that was how Klein meant it to be used. The pics I found just showed a cord wrapped up and then hung on just one of the hooks or they had things like a jacket or your hardhat on there. Either way this design wasn’t thought out all the way through

[@EnlightenedSavage]

Get over it....

[@Raymond65uk]

I love the orange on the klein if the ever sell them in the uk i would be very interested in replacing them instead of my makpac boxes cheers mate ive been waiting for this video 😊

[@michaelhutchison4810]

Love your video an actual done a dewalt version of your rifle case and got the quick change screwdriver btw that thing’s amazing. Would like to see some deeper foam available as would to like to make a few box to store paints sand disc box but would need 300mil depth soon adds up by 50mils

[@peterclarke3300]

Great video the tool boxes look great and the tools look well made 👍👍

[@jamesgriffiths3057]

like the drawer box that's good hope they come to the UK soon !

[@barryskeates5623]

great video again, like the compact Nut spinner set, think i'll have ot keep an eye out for one of those in the UK

[@GaryLeishman]

Great review to the Klein system & tools, they would do great if they ever come to the Uk. As a die hard Ryobi fan, I'd love to see the Ryobi system reviewed.

[@ShadowFoam]

Ryobi Link review has been on my list for a while, good suggestion mate!

[@tartanny]

Would the cable wrap accessory not clip onto another box 180° inverted to give a tight wrap?

[@sprinklesontopps2197]

Love the videos!

[@oktano]

Can't wait for you testing Polish brand Qbrick System. Really solid case system

[@matthewtrine2108]

I have the 2 drawer bottom box for the klein mod box system and im looking to get some foam in it but you don't gotta it on your website

[@watchcommander2012]

Great video with some interesting tools

[@nickiflitney9996]

Really enjoy watching your videos 😊👍

[@ShadowFoam]

Thanks Nick, what was your favourite tool?

[@nickiflitney9996]

The tool box stacking system, you should see how our tools are stored 😳🙄for our fencing !😁

[@jazzyfish3859]

It would be good to see a layout for a peli case, I use one for my tools if I need to travel. I have to pack a fair amount of hand tools in there. 3 sets of sockets 1/4 to 1/2 drive, 3 rachets and a couple of large 1/2 drive. Pliers, screwdrivers, Allen wrenches and full sets of spanners including long reach engine spanners

[@GMSTosch]

These are really nice additions

[@chrisheald6897]

Great video!

[@1MartinWaite]

I love the orange colouring if I was to replace my Teal I think that would be my go to as long as the price came down to compete with what’s for sale over here now.😊😊😊😊😊 One last thing try put the cable wrap on top of the other spread out over 2-4 boxes and it will work perfectly fine we can excuse you since you were a sparky .😂😂😂😂😂

[@KnightMayer]

Very informative love it.

[@PLafreniere76]

Thanks for Another Amazing Video 🇨🇦 🇬🇧

[@ShadowFoam]

No problem 👍 what do you think about Klein?

[@patrickomalley7460]

Great job keep up the great work.thanks

[@fotomaniac84]

Any chance you guys have inserts for the drawer boxes? Including the new rolling drawer box?

[@ShadowFoam]

Hopefully coming soon, as sooner i get those boxes, we will produce inserts for them!

[@MrJumper68]

I just ordered some of your foam from your shop. I live in Denmark... I am looking for a system boxes for my tools but were I live its only milwaukee you can get... And thats is crazy expensive

[@HarrisonINK]

Does the shadow foam inserts work well with strictly power tool storage? That’s what I use my modbox stack for.

[@darrenmccullagh2821]

Great video

[@thomas121189]

That tape measure looks really handy

[@nukearinen7669]

The flip socket is #1 on my wish list

[@shakeyh3565]

The only i thing i think might be a gimmick saying that its dust proof seal if you work on sites or dusty environments,you still going to get that dust in them,i know its a prevention but great video 👍🏽

[@stevencurrier6398]

I got an idea for you the lidl parkside tools have a massive following you should go and find all of them available around Europe and do a video

[@Imshrekstwinbro]

Looks great. It's a shame UK & parts of Europe don't have the same boxes/tools as other areas. Im sure if they were sold here people would purchase them! Great video as always! That tape measure was impressive!!

[@ShadowFoam]

Klein told me it was too costly atm to ship over mid boxes to the UK

[@legacyruss9091]

Maybe the folding knife is retractable for different cut depths. Great video

[@ExploreTheWorld-lx3lc]

nice video man

[@horaz86nope24]

Someone was making a hole during the frist part of the vid, wall scanner was missing :D And btw "Find a Box we havent made an insert yet" The Bosch XL-Boxx which is part of the L-Boxx system :D Still waiting for that one And man, I wished Sortimo would hurry up with thair upgraded L-Boxx system, wich they anounced earlier this year

[@neilduncan345]

My favourite two tools are the nut spinner and magnet with torch.

[@michaelfairchild]

That would be a good one for on road repair services with that orange.

[@Kenny-8327]

That concealable pocket screwdriver you missed a feature. You turn the blade around then pull that yellow piece forward and it covers your bit so it doesn't poke your pocket

[@mattsgreen]

Magnusson Stakkur - can we have an insert for the Tray Caddy please??

[@BleepinScotland]

Orange and black, great combo 👍

[@ShadowFoam]

Definitely a striking combo! 👍

[@tammybrazeau1213]

Klein tools, I wonder where in Ontario Canada I can find them! Another great video bud.

[@ShadowFoam]

When you figure that out, let me know! 👍

[@Ranger7Studios]

I have the Modbox for my film gear. It's fantastic!

[@Lord._.Farquaad]

Pretty neat box

[@ryanjagger7609]

Love the Klein tool box something very different but don't fancy the import charges, hopefully they come to uk

[@toubielo8788]

Klien was my favorite brand when it came to low volt work.

[@ShadowFoam]

What did you think of the mod boxes?

[@wadehughes8986]

Out of all this, I’m interested in the Nimbus flow screwdriver… hard to find on line

[@anderbethkitchens]

Could you not shadow foam the cup holder to make cans fit better?

[@Ranger7Studios]

The orange is also reflective for safety. Another key feature.

[@roobs8982]

Thanks dude, my dad's Christmas list is getting more and more expensive 😂👌

[@grahamfield-e7p]

just got the erbuar stack boxes on wheels, a strong sturdy box , with tools in its coming close to too heavy , do you have a review and a price on shadow foam inserts , cheers Graham

[@alfredwever8510]

Qbrick toolbox insert would be nice :)

[@ShadowFoam]

Having talks with them as we speak!

[@garyamies3969]

I like the magnetic pick up with light and should be brought into the UK.

[@peterparkour2137]

Next time, try the Qbrick System. I'd really like you to fit some shadow foam into the box and see how it works.

[@ShadowFoam]

We’re working on it! 👀

[@sunpinia]

Boxes look good

[@jasonchadburn1434]

What a fantastic box that would look amazing in my workshop 🤣🤣

[@ShadowFoam]

Loving a bit of orange are you Jason?

[@jasonchadburn1434]

@@ShadowFoam all the rest look a bit dull , really do love the inserts shadow foam is the future 👏👏

[@Grayson_Baker]

We need a video showing what you can do with the foam cutouts if you don't throw them away.

[@dansolo1947]

What are your thoughts on the Halfords tool box that you added foam to? I'm looking and getting one and ordering your foam. Is there another option you'd recommend instead

[@alunvaughan-thomas6168]

That tape looks the business.

[@842chuck]

More tools I didn’t know I needed.

[@stes6661]

I absolutely love the colour, we need better colours over hear in the UK

[@dagwood1327]

I have always loved Klein tools. I even have Klein mugs for coffee. They weren’t available when I bought my Packout boxes.

[@dagwood1327]

My favorite screwdriver is the 7” Phillips #2

[@Toolguy1]

I think the cable wrap acessory would work between boxes, then they would wrap better.

[@robertbutler8492]

Love the Klein tools their 10 in one nut driver and screw drivers are awesome also I’m from Canada we use Robertson screws and drivers “square drive” you should check them out they are the best

[@ShadowFoam]

I will check them out Robert! Thanks for the suggestion! 👍

[@ojcrook1340]

You have to do a video of stretching out all different tape measures to see what length you get. I was on the edge of my seat watching to see you go beyond 4m with the Klein one 😂😂

[@cstella2950]

The extension cord clips are meant to point up/down on top and bottom if the stack. Not for use on the same box

[@PhilipWillsWorld]

Great features.

[@thedoctor3459]

Nice box

[@joshosborn35]

Hi, I don't know if you can do suitcases I need foam For a suitcase for my music gear. I think my suitcase size. 19mm to 13mm I believe that's my size of my suitcase. I don't know if you can do that size on your website. Your website don't really show what size it is when you click on the foam.

[@lynnelewis9605]

Hi there I love the orange colour it stands out so much as well the tools being the same colour it just looks smart and the orange can b a woman or man.x

[@ShadowFoam]

Nice point there yeah, it does give a rather unisex quality

[@DeadloxgamingLTD]

Keep up the good work

[@ShadowFoam]

Thanks, will do! What do you think of Klein?

[@DeadloxgamingLTD]

@@ShadowFoam i think the tape measure is realy good

[@VDUBGUYDHCM]

How good is your foam on tool boxes

[@barneythebear5179]

I've got a video Idea, how about and EDC tool kit set up 🤔

[@robertbutler8492]

Regular Klein screwdrivers are acetate handles great grips and their pliers are second to none

[@irinadavid800]

Aren't these pronounced Klee inn in US? I do like the brighter look and makes it easier to add personal marking