BEST Beer Caddy for ICY Cold Beer

[@princefox2009]

I can listen to him talk all day.

[@diyforknuckleheads]

Glad you liked the video mate 👍😁🇦🇺

[@darrylbuckett5380]

I made several of these a couple of years ago, but yours take the art to another level, perhaps I should update and pinch your ideas. Cheers

[@diyforknuckleheads]

Cheers Darryl and go for it mate 👍 In case you do, l'd suggest as an improvement to silicone the cans down 👍👍

[@craigperry7376]

Now that is a suitable project before Summer comes around again.cheers 🍻👍🦘

[@stevecollins9450]

That's another great project from Uncle Knackers!

[@diyforknuckleheads]

Cheers Steve...appreciate the comment mate and l hope you're having a great weekend 👍😁🇦🇺🍺

[@Gisburne2000]

I can confirm what someone else said: I live in England and I never put beer in the fridge. I prefer room temperature beer. When it's cold you can't taste it and can't drink it fast enough! On a VERY hot day I do drink cold beer, but... it's England, I could die of thirst waiting for a hot day! Having said that, it's a great project, which has given me some tips for making other things. The blue tape tips before sawing/drilling are priceless, and the cap catcher has given me a great idea for a new project: a wooden board painted like a dart board, embedded with magnets, at which you throw your beer caps from your arm chair. I'm too lazy to make it so you can have that idea on me! Cheers!

[@diyforknuckleheads]

You're an ideas man Nick....magnetic dart board hey 🤔 .....leave it with me 😁 Mate if you rocked up to a barbecue over here with warm beer you would be politely escorted out 😂 Thanks for watching mate.....much appreciated 👍😁🇦🇺🍺🍺

[@crusty_the_alpaca]

Love it!! Never knew I needed this until I saw your video!

[@diyforknuckleheads]

Hahahahaha...good stuff Alan 😂 Thanks for watching mate 👍😁🇦🇺🍺

[@coldwoodcowboy4525]

When you said you noticed one major problem I thought you were going to say you realized you only made room for six beers! Very cool project and it turned out great. Thanks for sharing that!

[@diyforknuckleheads]

😂😂.....that as well C.C 😂 Thanks for watching mate and l hope you're having a great weekend 👍😁🇦🇺🍺🍺

[@mranonymous8979]

That’s gold love the colours yellow and black 👍

[@diyforknuckleheads]

I take it you're a Richmond supporter mate??? 👍😁🇦🇺

[@RiaanOliver]

What a great project, the peep window is a great idea it makes it a bit unique.

[@diyforknuckleheads]

Cheers Riaan....it certainly adds to the illusion of coldness 👍 Thanks for watching mate 👍😁🇦🇺

[@davidespinozareyes2150]

You’re awesome Uncle Knackers 🇦🇺🇦🇺🇦🇺

[@diyforknuckleheads]

👍 Glad you liked it David 👍😁🇦🇺🇦🇺

[@bradpearsall966]

Keep up the quirky videos , comments , ideas and creations

[@diyforknuckleheads]

No worries at all Brad....will do and thanks for watching mate.....much appreciated 👍🇦🇺😁🍺

[@LazzyDoo]

I liked this video before I even watched it. 10/10 would pre-like again!

[@diyforknuckleheads]

Hahahahaha....Cheers mate 👍😁🇦🇺

[@bilbottles1339]

That's heaps cool. I like the idea with the masking tape 👍

[@diyforknuckleheads]

Cheers B.B....yeah the tape works really well 👍😁🇦🇺

[@SandiRose2008]

I'm just so utterly proud of you, Uncle Knackers, the way you forced yourself to drink that warm beer for the sake of another impressive video! Who needs a stunt man when we have you.... my hero! 😍🤣

[@diyforknuckleheads]

A mans gotta do what a mans gotta do Sandi 😂 Taking one for the team is just part of the job 🤣 Thanks for watching 👍😁🇦🇺

[@andrebartels1690]

Pro tip: If you want to avoid tear-out on hard coated chipboard, use a sharp saw, and make sure that the cutting motion is *into* the visible surface. On a circular saw, this means nice side up. With a jigsaw, nice side down. And tape. And if your jigsaw can tilt the blade back to front, activate that feature. Edit: You're showing very good practice to put a sacrificial board under what you're drilling, that prevents tear-out perfectly. Great job! Edit: I truly love your Dad jokes. They add a special touch.

[@diyforknuckleheads]

Thanks Andre!...appreciate the extra tips mate and l'm glad you enjoy the dad jokes 😂😂

[@andrebartels1690]

@@diyforknuckleheads absolutely! I love how you share your knowledge and skills in such a relatable manner. Not all too shiny, with results that a normal guy can achieve. This helps beginners to do something and not only watch. Great show!

[@diyforknuckleheads]

@@andrebartels1690 Really appreciate that mate 👍👍

[@Avishay90]

Thank you for sharing Love will win, fear will not - Love fear 💖 than it will never win 🙏

[@o.g.bwoodwork]

Fantastic idea! No one likes a warm beer!

[@diyforknuckleheads]

You got that right mate!.....the colder the better 🍺🍺 Thanks for watching 👍😁🇦🇺

[@terryshorrock2458]

Great video Uncle Knackers........and on a subject close to my heart too.....!!!!

[@diyforknuckleheads]

😂....good stuff Terry 👍😁🇦🇺🍺🍺

[@timlist4173]

Nice caddy for your 6 friends.

[@diyforknuckleheads]

👍👍😁

[@johnvodopija]

A bloody bonza project knackers! The rare earth magnets idea is genius. Lovin the channel. Cheers 👍😎🇦🇺

[@diyforknuckleheads]

Awesome!....thanks John 👍👍😁🇦🇺

[@stevencarter7999]

What no overpriced Yeti thing. Love the build there knackers.

[@SandiRose2008]

Hahahaaa! No overpriced Yeti thing!!!

[@diyforknuckleheads]

Cheers Steve! 👍😁🇦🇺🍺

[@OzSawdustMakers]

Love it Unky Knackerbags!!! The only problem is that it only holds 6 beers, where do the other 20 beers go?! hhah love your work mate, this is fantastic and nothing else like it.

[@diyforknuckleheads]

Hahahahaha.....Cheers Ryno.....mate l hear ya re the other 20...l'll have to work on that one for a future build 😂 Thanks as always for watching mate and have yourself a great Sunday 👍😁🇦🇺 P.S Have you recovered after the Tigers win??

[@terryyouth]

@@diyforknuckleheads maybe you can think of one like a spring loaded or gravity fed or so, where you stack them like a magazine and self loads for the next one

[@diyforknuckleheads]

@@terryyouth Now we're talkin' mate 😂

[@OzSawdustMakers]

@@diyforknuckleheads mate it was struggle street for over a week. You've inspired me to try and give it a go! Maybe we have the #KnuckleheadsBeerCaddyChallenge which is a mouthful you know what i mean haha Cheers mate!

[@diyforknuckleheads]

@@OzSawdustMakers I bet it was mate....bloody good team...you'll probably do it again next year!! Great idea re the challenge mate...l'll give it some thought 😁🇦🇺🍺🍺🍺🍺

[@jaxonbailey5040]

Gudday uncle knackers,I absolutely love watching your videos and the dad jokes are great,,, sometimes. I am a new wood worker although I am 52 years old. Thanks for all the tips and tricks. You should have your own show on tv mate. Sorry about being a pom. Keep it up

[@diyforknuckleheads]

Apologies accepted re you country of origin Jaxon 😂 Glad you liked the video mate and l really appreciate the kind feedback! Cheers mate 👍🇦🇺😁

[@jimgardiner3476]

Two of my favourite pastimes there Shane.

[@diyforknuckleheads]

Welcome to my world Jim 😂🍺 Thanks for watching mate 😁🇦🇺👍🍺

[@pteddie6965]

Very creative and well built, Uncle Knackers. A man will do anything to keep his beer cold, huh?

[@diyforknuckleheads]

Whatever it takes mate 😂 🍺🍺 Thanks for watching 👍😁🇦🇺🍺🍺

[@smjmike781]

Shane, Back in October I contacted you about a beer caddy with your twist on it. You said you would try to get one out there. You delivered with flying colors. Not only did you come up with some genius ideas, you made the caddy in Iowa Hawkeye colors. I don't know if that was by design or a coincidence (since I'm from Iowa). Either way, thanks for the build. I plan on making a few of them real soon. Best wishes. Mike

[@diyforknuckleheads]

I remember Mike 👍 You got the old brain matter turning over 👍 Glad you liked it mate. Just an idea but l reckon for version 2.0 that you silicone the cans down to hold them in place rather than going through the effort of cutting the blocks to hold the cans down during the freezing process. Good luck with them mate and go the Hawkeyes 👍👍😁🇦🇺🍺

[@MindMatterCreate]

Mate thats cool ! I like the cap catchers too, pretty smart :D

[@diyforknuckleheads]

G'day Dave....thanks mate...glad you liked it 😁🇦🇺

[@Fierylad]

Great to see your drinking a brilliant South Australian product... Go the Coopers!!! 👍

[@diyforknuckleheads]

Mothers milk mate 👍👍🍺🍺

[@dazzamac70]

What an awesome project!!!👌🏻🍺🍺🍺

[@diyforknuckleheads]

Thanks Darren! Glad you liked it mate 👍👍👍😁🇦🇺😂🍺

[@jamesblanton9364]

Awesome Sauce Knackers ! What a ripper idea and it turned out bloody beautiful mate. It's been a while mate, so i really hope life's been going great for you and you're family Shane, and you're all healthy and happy, and shaping up for a completely ripper chrissy. Good to see you again old mate, and take care of yourself. Cheers

[@diyforknuckleheads]

G'day James....great to hear from ya mate. Same to you and yours Mate and thanks for watching 👍😁🇦🇺🍺

[@78wesley]

Heres a tip uncle knackkerrrssss, i would just put the silicone used to seal the inside, on the bottom of the cans, that way they don't pop up and would remain stuck to the bottom, as we say in plumbing "do ya best, silicone the rest" ahahahah

[@diyforknuckleheads]

Hahahahaha....mate......youre an ideas man....why didn't l think of that Wes!!! That's my version 2.0 Cheers mate 👍😁🇦🇺

[@123024119]

Yes Knackers! About time bud this one has been simmering nicely for a while, glad you finally got round to making one and a great idea with the cooler! Good job bud

[@diyforknuckleheads]

Thanks Paolo....still needs a little refining but l think we're getting there 👍 Appreciate you taking the time to watch mate 👍🇦🇺

[@annie-centrepiecefurniture]

Aussie summer dreams come true !!!! Great tip Uncle K !!! Shared that Dad joke with my brother, he was Shocked!!

[@diyforknuckleheads]

Hahahahaha...tooshay Annie 😂 Bring on summer l say 😁👍🇦🇺🍺

[@jaimeramirez5613]

Great beer cady .Awesome work 👌

[@diyforknuckleheads]

Thanks Jaime 👍👍😁🇦🇺🎄

[@douglafferty7688]

This is my next project...guaranteed. Thank you for sharing. Just love this!!

[@diyforknuckleheads]

No worries at all Doug 👍 If l may make a suggestion....try siliconing the cans down.....it may be a better solution than the blocks for stopping those cans from floating 👍 Good luck with it 👍😁🇦🇺🍺🍺🍺

[@devinematt2544]

Bloody good job Uncle Knackers! And the cap catcher - what a ripper! Love them jokes...........

[@diyforknuckleheads]

Hahahhahaha...cheers Matt 👍👍😁🇦🇺

[@frankarmitage776]

Recently started woodworking and came across your channel. I’ve already made a couple things off your channel. Very creative ideas. Looking forward to more

[@diyforknuckleheads]

Awesome! Thank you for that Frank! I appreciate you taking the time to watch mate 👍😁🇦🇺

[@julietphillips1991]

I don't drink beer, but that won't stop me from enjoying this very creative, best beer tote I have seen! Enjoyed the 'Dad joke' as well! Big thumbs up Shane!

[@diyforknuckleheads]

👍 Thanks Juliet....glad you liked it! Hope you're having a great weekend and thanks for watching 👍😁🇦🇺

[@ahmelmahay]

fab idea....must make one for the summer

[@diyforknuckleheads]

👍👍🍺🍺

[@andymiller5611]

That's a nice little project! Excellent work! 🍻

[@diyforknuckleheads]

Thanks Andy...appreciate the comment mate 👍😁🇦🇺

[@dahamus]

Noice...! Taking the beer tote to the next level.

[@diyforknuckleheads]

Cheers mate 👍👍😁🇦🇺🍺🍺

[@wtfbuddy1]

Nice project - envious of the bean cans, there they are 398 - wish they were 555. Cheers and stay safe

[@diyforknuckleheads]

Cheers mate.....soup cans are also good 👍👍😁🍺

[@78wesley]

Another awesome build knackerssssssss

[@diyforknuckleheads]

Cheers Wes....hope you're having a cracking weekend old mate 👍😁🇦🇺

[@ToddReuterOutdoors]

Those beers look TASTY!

[@diyforknuckleheads]

Mmmmnn....did someone say beer!! 🍺🍺🍺....They were very tasty Todd....cold too 👍😁🇦🇺

[@DaleSteadman]

Love it!!! Cheers mate!!! 🍻

[@diyforknuckleheads]

No worries Dale....glad you liked it mate 👍😁🇦🇺

[@BfreeBob]

Very innovative. Love it!

[@diyforknuckleheads]

Thanks Bob! 👍😁🇦🇺🍺🍺

[@meonly5335]

This is a great gift idea. I’m going to make one for my brother in law. Always love your videos! Thank you! 👍😀

[@diyforknuckleheads]

Thanks for that M.O....yeah it's a great gift idea...l'm sure the brother-in-law will love it! Thanks for watching 👍😁🇦🇺🍺

[@lochavenwoodworks6578]

That’s a cooooool project mate 😀

[@diyforknuckleheads]

Thanks Jason.....it's gonna get a workout this summer 👍😁🇦🇺🍺🍺

[@מעייןהמלבלבתחייםםםם]

Brilliant idea, great joke!!! Perfect channel!!! Cheers!!

[@diyforknuckleheads]

👍👍......thanks for that....really appreciate the comment 👍😁🇦🇺

[@sumosprojects]

Mate I can only say that this is the best bloody beer 🍺🍺🍺 caddy I’ve seen because it’s a wonderful project that suits our 🇦🇺🍻drinkers. Dad joke was actually not to bad on this one & I reckon there’ll be many whom make this, super design Knackers 🇦🇺🇦🇺🇦🇺🍻🍻🍻👍👍👍🍺

[@diyforknuckleheads]

Good onya Dirk 👍 Gave it a workout last night....worked a treat 🍺🍺🍺 Thanks for watching mate and l hope you have a relaxing Sunday 👍😁 Looking forward to your show tonight 👍👍😁🇦🇺

[@CelalUnal1]

Hello. Very beautiful and high quality workmanship. Fun and instructive video. 👍👍👍

[@diyforknuckleheads]

Hi Celal....glad you liked the video mate an l appreciate the comment! Cheers 👍😁🇦🇺

[@roccosteven8731]

Instablaster.

[@awantamta]

Absolutely brilliant. I also love those gloves you were wearing.

[@diyforknuckleheads]

Thanks Tahir!! Mate the gloves are great 👍 They still give you the dexterity to hold things like a nail while still protecting your hands 👍😁🇦🇺

[@alcarey8084]

Perfect idea for my best mates birthday in June! Thanks Unk!!

[@diyforknuckleheads]

No worries at all Al.....hope he likes it. Just a little tip. I reckon if you silicone the cans down you might not need the blocks when you freeze it.....just a thought 👍😁🇦🇺🍺🍺

[@philipoconnor2236]

Another great project! As always love your thought and design process as much as the making. Just remember.... "A cold beer...... It's not just for Christmas!!"

[@diyforknuckleheads]

🍺....l'm with you there all the way mate....it's always 5 o'clock somewhere in the world 😂 Thanks for watching 👍😁🇦🇺🍺

[@charlesviner1565]

Nice video,greetings from Davenport Iowa,USA

[@diyforknuckleheads]

G'day Charles 👍 Glad you liked it mate and thanks for watching from all the way over in Davenport!...much appreciated 👍😁🇦🇺🍺

[@TheGrantAlexander]

Love it!!! I've added it to my beer caddy showcase playlist 👍👍

[@diyforknuckleheads]

👍....Always knew you were a man of great taste Grant 😂 Thanks for watching mate and for adding it to your playlist 👍😁🇦🇺🍺🍺🍺

[@The_man_himself_67]

Warm beer is bad, warm Australian beer is toxic. Hehe... Actually the magnetic bottle top catcher was really cool. Thanks.

[@diyforknuckleheads]

Toxic?....l agree Richard 😂 Thanks for watching mate 👍😁🇦🇺

[@henryskinner1092]

I really really like this. Thanks.

[@diyforknuckleheads]

Cheers mate 👍

[@stuartosborne6263]

Genius.

[@diyforknuckleheads]

Cheers Stuart 👍👍😁🇦🇺🍺

[@fabulousfurniturecompany2614]

Another great video mate 👍🏻🙌🏻

[@diyforknuckleheads]

Thanks Tom...appreciate it mate 👍😁🇦🇺

[@markandersen4851]

I've got a few beer drinkers on the Christmas Gift list who are getting these now, thanks for the step by step :)

[@diyforknuckleheads]

No worries Mark....good luck with the caddies👍👍 Just as a quick side note....maybe try siliconing the cans down as well 🤔 Have a good one and thanks for watching 👍😁🇦🇺🍺🍺

[@Mixwell1983]

I would need to make two of these, one for each hand. 👍

[@diyforknuckleheads]

Hahahahhaha....join the club mate 😂 🍺🍺🍺🍺

[@IsaKocoglu]

Do not drink any alcohol... but great for other drinks as well... maybe cans, other non alcoholic bottles, or even a 1.25, or two litre caddy? Great tip Uncle Knackers, as always! 😉🇦🇺👍

[@diyforknuckleheads]

Thanks Isa! Appreciate the feedback mate 👍😁🇦🇺

[@danbelzile9399]

Hey shane. In the future I will make one of those that u built.....cool video.👍👍🇨🇦

[@diyforknuckleheads]

Cheers Dan and thanks for watching mate 👍😁🇦🇺🍺🍺

[@adamjackson82]

Nice one knackers!

[@diyforknuckleheads]

Cheers Adam! Thanks for watching mate 👍😁🇦🇺

[@andrewgwatking54]

Maybe fix the cans to the bottom somehow? Great project and I enjoy your other videos, I built your workbench a few years ago

[@diyforknuckleheads]

Yeah it's still a work in progress Andrew.....maybe if l siliconed the cans down, that would be the go 🤔 Thanks for watching mate and for the feedback 👍😁🇦🇺🍺

[@drifternow]

Great project.

[@diyforknuckleheads]

Cheers Noel! Appreciate the comment mate and thanks for watching 👍😁🇦🇺🍺

[@baldypalmsrailroad]

Great project! nice work, love the bottle cap catcher. Oh! and I'll be sure to stay clear from the jumper cables next time I'm in the bar.... 😂🤣👍 Skål! Ron//

[@diyforknuckleheads]

Thanks Ron! Yeah ya gotta be careful of those jumper cables mate 😂😂 Thanks for watching 🇦🇺 👍😁

[@wayward_dom6865]

Top work mate 👍❄🍺 . That joke is still one of my favourites 😄

[@diyforknuckleheads]

Hahahhahaha....yeah, one of mine as well Dom 👍😁🇦🇺🍺

[@ronaldcomilang9483]

Yes ! new video! ❤

[@diyforknuckleheads]

Hope you enjoyed it Ronald 👍👍👍👍

[@alanfletcher3912]

Great project and I love the joke, can't wait to see another!

[@diyforknuckleheads]

😂....Cheers Alan...glad you liked it mate 👍👍😁🇦🇺

[@YS-by7wy]

Awesome video!

[@diyforknuckleheads]

Thanks Yvonne 👍😁😁🇦🇺

[@noelsagayno3882]

I got beer thirsty,, wanna try that , too.😄😄😄🇵🇭

[@diyforknuckleheads]

Give it a crack Noel🍺🍺 Thanks for watching mate 👍😁🇦🇺

[@jackbethell7984]

Three men walked into a bar. You'd think that at least one of them would have seen it.

[@diyforknuckleheads]

😂😂

[@jamiegleave7620]

Brilliant

[@diyforknuckleheads]

Thanks Jamie 😁🍺🇦🇺🍺

[@DaveGDesigns]

Top job knackers I love it the magnets are a great touch and that’s just the tip of the iceberg 😝 I’ll get my coat lol

[@diyforknuckleheads]

😂😂....love it! Thanks Dave.....try the steak....l'm here all week 😂

[@Josh_Luijsterburg]

Shane, good onya mate 👍👍👍👍 lets hit the turps soon 😉

[@diyforknuckleheads]

I'll be up for that Josh! 🍺🍺 Thanks for watching mate 👍😁🇦🇺🍺🍺

[@JackSunday7]

Brilliant work Knackers! Hashtag #ideasman Cheers! 🍺🍺🍺🍺🍺🍺

[@diyforknuckleheads]

🍺 Cheers mate 🍺🍺

[@richardbennett3199]

nice one knackers

[@diyforknuckleheads]

Cheers mate 👍👍

[@VoteEvilDrumsNow]

Never knew that Bob is my uncle

[@danjoe22]

Great job, great project. Ran into a problem and solved it swimmingly! I even liked the dad joke. I'd love to have a Cooper's with you.

[@diyforknuckleheads]

Did you say Coopers??? I'm there Joseph! 😂🍺....Thanks for watching mate 👍😁🇦🇺

[@FixitFingers]

Many little tricks going into that one! Now we just need a slab sized version 😁 🍺🍺🍺🍺🍺🍺 🍺🍺🍺🍺🍺🍺 🍺🍺🍺🍺🍺🍺 🍺🍺🍺🍺🍺🍺

[@diyforknuckleheads]

You're an ideas man James 😂😂🍺🍺🍺🍺🍺

[@wtabilltaw]

What a bonza project mate . You could make similar one for tinnies . Bill in uk

[@diyforknuckleheads]

Yeah mate.....tinnies would work for sure 👍 Thanks for watching Bill 👍🇦🇺😁

[@BenHollist]

OOOOOOOOOOOOOOOOOOOOOOOOOO NEW GLOVES 😋Obviously didn't help with that Band aid finger 😂😋😂 what a COOL build mate well done Ohhh and flip it over next time ya using a Forstner or spade bit to prevent tear out.

[@diyforknuckleheads]

Yeah mate.....very fancy 😂😂.....The bandaid was covering a bloody big slice that l self inflicted upon myself whist cutting vegetables!!! 😂 Have a good one mate 👍😁🇦🇺

[@BenHollist]

@@diyforknuckleheads WOW take a big fella to admit he hurt himself whilst doing the veggies 😄😄 mate give me a call so we can arrange a get together

[@diyforknuckleheads]

@@BenHollist Those bloody carrots mate 😂 I'll call ya mate 👍👍

[@NickGranville]

Ha, in England they like their beer room temp. I just couldn’t get used to it being a kiwi lad.

[@burlapbutcher1569]

Believe me, we don't.. It's just laziness on our part 😂

[@diyforknuckleheads]

Warm beer.....what can l say.....not in my Top 5 🤔 Thanks for watching Nick 👍😁🇦🇺🍺🍺🍺🍺

[@diyforknuckleheads]

😂😂🍺

[@NickGranville]

@@burlapbutcher1569 lol!

[@CarlManson1983]

Great concept! I think your way of stopping the cans from floating could do with some refinement, but the idea is solid.

[@diyforknuckleheads]

Cheers Carl....yeah it's still a work in progress mate but l think if l siliconed the cans down that would help 🤔 Have a good one mate and thanks for watching 👍😁🇦🇺🍺

[@Dcvmnaturalist]

Really nice!

[@diyforknuckleheads]

Cheers mate 👍😁🇦🇺🍺

[@johnbeerworth]

Nice drop that Coopers ale

[@diyforknuckleheads]

Yeah l love the stuff mate 👍😁🇦🇺🍺🍺🍺🍺🍺🍺

[@PeanutsDadForever]

I love it!🇦🇺👴🏻

[@diyforknuckleheads]

Thanks Mark! Appreciate the comment mate 😁👍🇦🇺

[@SMee67]

Bloody ripper mate! 👍🏽 And don't you start anything! 🤣🤣🤣🤣 8/10👌🏽

[@diyforknuckleheads]

😂😂....an oldie but a goodie Bill 😂 Thanks for watching mate 👍😁🇦🇺🍺

[@b1ackramb0-v7x]

Great little project mate! Living in Guam and this will be perfect! Merry Christmas to you!

[@diyforknuckleheads]

Awesome! Thanks for that Gurana. I appreciate you watching all the way from Guam as well 😁🇦🇺👍

[@frankstover3444]

Ever in 🇺🇸 mate.. I got a spot for ya... beers always iced! Cheers

[@diyforknuckleheads]

You're a legend Frank....l'll have one with you for sure 🍺🍺🍺

[@terryyouth]

Good one and neat work. You forgot your sticker!! one question. what happens after all that ice melts? wouldn't those cans pop up again?

[@JackSunday7]

Good question. Hopefully all the beer would be drunk by then! :) :) :)

[@diyforknuckleheads]

It's only a six pack mate.....they should be drunk by the time the ice melts 😂

[@klausreviewscraftrestore3152]

you should make one for coke. I dont drink alcohol...never have my whole life, but coke good and cold, thats where it is. I am drug and alcohol free from birth. great video as always. cant wait till the next one.

[@diyforknuckleheads]

G'day Klaus....yes mate it is certainly adaptable to being a Coke Caddy!! A Nice good Coke is beautiful...love it! Thanks fir watching mate 👍😁🇦🇺

[@klausreviewscraftrestore3152]

@@diyforknuckleheads yeah, always a good video, always like to see a new one.

[@dantovey2785]

You little ripper 🍻

[@diyforknuckleheads]

Cheers Dan 🍺🍺

[@jmoye423]

If you can come up with an easy solution for when the cans pop up after the ice melts to keep them securely held down it would be much appreciated I really love this idea

[@diyforknuckleheads]

Mate, l'm thinking that if we siliconed the cans down we might be on a winner 🤔 Thanks for watching 👍😁🇦🇺

[@barryroberts6470]

Great build Shane but one problem for me, crappy weather here at the moment so no BBQs, come to think of it when is there any good weather ha ha ha. Still a great build though. Stay Safe Mate, Barry (ENG)

[@diyforknuckleheads]

Thanks Bazz! Mate...big contrast to here.. it's really starting to warm up ...Aussie summer here we come! .looking forward to a few barbies coming up for sure 🍺 Hope you're having a great weekend 👍😁🇦🇺🍺

[@TheScottieMac]

Love a Coopers Ale

[@diyforknuckleheads]

It's good stuff Scott....my fav 👍😁🇦🇺🍺

[@frankslittleworkshop]

Nicely done (as always) 😁. I don't even drink and I want one 😂🤣. Great dad joke as usual, think I'll use that one.... if we ever see real people again after lockdown that is. Thanks Unk.. keep em coming 😁👍.

[@diyforknuckleheads]

No worries Frank! Glad you liked it mate 😁👍👍🇦🇺

[@molpolkristine]

COOOOOL

[@diyforknuckleheads]

Cheers mate 😁🇦🇺👍🍺🍺