How To Make A Sublimation Tumbler| HTV RONT Sublimation Tumblers

Hey guys all the info I mentioned in the video will be listed below. @HTVRONTOfficial
Use this link to take advantage of HTV RONTS 18 dollar off coupon at your checkout. (offer VALID from 2023-4-11 04:00PDT - 2023-4-25 23:59PDT)
(Code/coupon provided at check out) ⬇️⬇️
Sublimation tumbler: www.amazon.com...
How to convert the EPSON ET 4800 to a sublimation printer:
• How to convert the EPS...
ITEMS YOU WILL NEED:
Heat protection gloves:
a.co/d/c3AC0dd
Heat resistant tape:
a.co/d/eJ4dget
Tumbler Heat press:
a.co/d/fRQ44NU
EPSON ET 4800:
a.co/d/1x4CEX9
Music by: Bensound
License code: OTXQNR1HNYYE61W6
#htvront #tumblertutorial #sublimationtumbler #howto #craftvideos #viral #crafter

[@user-cl6uo2sm1c]

You must have been a teacher in a former life! Your step by step has been the best I have seen thus far! Thank you so much for the walk through on the pc and printer!

[@wildflowers8137]

Girl I’m 63 years old & been trying to get this sublimation / thing right,, well guess what u helped me. I could understand every direction u told us to do! Hats out to u from this “ bout to throw it out da window Grandma” TyTy

[@sharenalatrese408]

I’m so glad I could help you don’t ever give up

[@NoveltyQueens]

You look amazing for 63

[@kerryannwright5478]

This is the best detailed video by far....my tumbler came out PERFECT! Thank you.

[@xQUEENxPRx]

Only watched onece.. and did my first tumbler perfectly!!!

[@angelfigueroa3040]

Thank you, I just bought my first heat press. Your Video very clear and understandable .. I'm sure I'm gonna watch few more times before I start my 1st one. Thank You

[@DJONESHOPEWELL]

Your instructions have been the best I have heard so far. Direct and brief and not a lot of unnecessary talking about stuff that had no bearing on sublimating - THANK YOU !!!

[@lisaschmitt5813]

You did a GREAT JOB!!!

[@LibbyLuv1]

This is the BEST tutorial I have come across. The steps, the directions, and the measurement are 100% Thank you so much for your time and help. Two thumbs up!!

[@allisonwallis]

Just got into sublimation and found your video. Your measurements and the way you added the tape had me with an almost perfect cup. Just didn’t leave it long enough. Thank you for great content.

[@nahnisjourney1406]

Absolutely BEAUTIFUL!!! That PURPOSE!!! 🌹

[@Craftybowladychannel]

Thank you for this awesome tutorial. I learned so much with your presentation and finally did a tumbler without ghosting. I've watched other tutorials but yours is the most helpful ❤. Looking forward to seeing more of your tutorials

[@jamesadamos8199]

Well done! Best instructional video I have seen.

[@Keith-mj8lo]

you did a very great job on this video. Great presentation

[@jaemarie7791]

Thank you soooo much for this !!! It helped my tumbler come out so nice ! Can you do a tutorial for the sublimation mugs ? I was trying to find one but i didn’t see it

[@lisaross6781]

I am so glad that I found your video! You are the Best!

[@patriciapayne1854]

Great Tutorial. My seams are FINALLY crips and sharp. The side taping was the trick. Noooooo ghosting. Thanks so much....

[@sharenalatrese408]

No problem glad I could help 🙂

[@greenbutterfly9455]

Came out really nice. 👍🏽

[@Cricuter]

Thank you for taking the time to make such a detailed tutorial! Your video was fantastic and I learned a ton!

[@nelkacolbourne5144]

I am 65 yes and your video helped me to sublomate perfectly. Thank you. Please post more videos

[@PrinceSaladin]

thank youuuu girl for the video, This tuto is perfect and the trumbler look's like very pretty ,

[@annabellepittman711]

Thank you! Your videos make sense and my very first cup turned out perfect ❤

[@RebsDesignBoutique]

thank you for setting I didn't know how to make sublimation very vibrant colors . beautiful design

[@sharenalatrese408]

Glad I could help!

[@ayala2968]

What size do you use for printing?

[@zizimcreations]

Super cool!! We have those blanks too! Love your works!🥰

[@sharenalatrese408]

Thank you lots 😊

[@johnfigueroa7569]

I watch your video the other day as I was looking for information on sublimation tumblers. Yours has been the best that I’ve watch. Thank you very much for sharing John Figueroa.

[@sharenalatrese408]

Glad it was helpful!

[@alisharamaglia4206]

I need this wrap... beautiful work

[@bonnieh8216]

I know I can do this. Your presentation was simple and informative. Thank you

[@EmpressNatiLocs]

Soooo pretty! I’m ready to get back into crafting so thank you for the motivation! You’ve earned a new subbie! I neeeed that cup!

[@sharenalatrese408]

Thanks for subbing!

[@tiannaclark2585]

I love the way you showed all the items you will need. Very structural on your presentation. Awesome! Will be trying every step given...

[@sweetT1987]

Loved your video...by far the best one I have watched. Made my 1st tumbler but I still had some imperfections but i loved how it turned out. I will watch again and try again so i can do better. Thanks so much for this video. 🥰🥰🥰

[@stljh6833]

Best video yet! Thank you!

[@sharenalatrese408]

Wow, thanks!

[@2075jman]

Nicely done. I just started doing this and your tips answered a lot of the questions I had. I also read the comments and a lot of the questions people are asking you actually answered in the video, I think they should rewatch and listen to the things you said. Great work.

[@stevent5571]

Bought all the equipment the other day. Have to load the ICC file then going to print my first tumbler. Great job teaching

[@sharenalatrese408]

Awesome! Thank you!

[@catinarenae]

I’m going to try your tape method tonight, I’m nervous to skip taping the top and bottom but you’ve convinced me to try! Thank u 😊

[@sharenalatrese408]

I promise you don’t need all that tape 😂

[@user-qi4gy3le2p]

omg thank you so much i been try to figure out how to do thing for a minute now. your video just helped me a lot. Thank you

[@pink.ivy87]

That came out perfectly. Thanks for sharing... New Subscriber!

[@MariaRodriguez-gl7cg]

Best explanation step by step and it came out perfectly n it was my first time making one

[@sharenalatrese408]

Happy to hear that!

[@cuttingpro]

Amazing content. Thank you!

[@sebrennalister4432]

Perfect settings! Thank you so much!!!

[@sharenalatrese408]

You're welcome!

[@antoniaparra2709]

Thank you for your patience showing us very slow, I'll try out, first beginning. So nervous

[@jasminesumler5938]

I just tried your method. I’m so happy! Thank you so much for your helpful tips!!! Yay❤

[@sharenalatrese408]

You are so welcome!

[@michiartistpr]

Wow thank you thank you this the best tutorial

[@quillajefferson8110]

That’s a beautiful cup yes 🎉

[@glamgotti1963]

You gave great instructions, I can’t wait to try it out!

[@sharenalatrese408]

Please do!

[@MrBeautygal117]

She's the best. From many I've seen I LOVE the way she explained everything well 💕

[@nahnisjourney1406]

BEAUTIFUL!!!

[@JUMA7891]

Great job

[@JUMA7891]

Excellent class❤️

[@katrinaskraftkorner4843]

That came out absolutely perfect 🥰

[@sharenalatrese408]

Thank you 😊

[@katrinaskraftkorner4843]

@sharenalatrese408 you're welcome and thank you for sharing

[@sicotfrancescasicotfrances6417]

❤❤❤❤

[@janetparris3486]

I tried the way you said to tape the cup. It turned out perfect the best cup I've made so far. I can't even find the seam.❤

[@sharenalatrese408]

This makes me happy.

[@Marvatate201]

Thanks for sharing sis !

[@sonestia777]

I been thinking about getting into this as a hobby but didn’t know where to start.

[@aechol2]

Awesome video

[@davodelacruz]

Wow this helped me a lot..thank you very much. I'm so new to this

[@Kay-co2ig]

So beautiful, can you do more videos like this one?!

[@sharenalatrese408]

Yes of course!

[@jasminesumler5938]

I’m gonna have to get silhouette bc my design space doesn’t allow me to print a large image to fit a tumbler. Saving this and will try soon. Thank you

[@sharenalatrese408]

No problem it makes it easier

[@marilyntipton3153]

Ran across this video and followed and I've made 3 tumblers since.. I've been playing around with the length 8.0 - 8.1 - 8.2..

[@annaw8838]

Thanks that’s a great tip

[@sharenalatrese408]

Thank you glad I could help 😊

[@kimberlylucier9888]

Great video! =) Can you show how you measured to get the exact size for your tumbler?? So that it just butts up and doesn't overlap.....

[@genesisalmonte6084]

Loved the video!!! But I didn’t understand much the white border taping part ?

[@JUMA7891]

Thank you

[@MelanyLCC]

Hello. I don't speak your language but I really liked the video, I understood a lot of what you showed, but since I don't speak English I had some doubts. What did you clean the Tumbler with? Why do you put heat tape behind the insole? And finally, are your tumblers the exact size of the worksheet? I have made artos and sometimes there are white spots on the bottom where the bottom is not straight, I have used millimeter larger templates, therefore I have to make small doubles to stick the tape at

[@sicotfrancescasicotfrances6417]

Lord to protect beautiful

[@AmyVuono]

Thank you for your help, could I ask what kind of PC you use? I think the pc I have doesn’t have the same printer settings and it might be because I need an updated pc.

[@Astralfort]

Wow beautiful, i should start a business already😂. Please i would like how this could be done on shoes.

[@MrBeautygal117]

Hello. Love your video. Very helpful. So i have a question. Do you use the same setting for all design tumblers? Ive notice that on the red color whe. I have something red it looks more orangy. The settings i have it is on 0, 4, 8, and 3 hope to hear from you back 😊

[@bigred6815]

Very easy to follow. Is it possible to sublimate the large cappuccino mugs?

[@sharenalatrese408]

Yes make sure you tumbler press is compatible for it

[@talkwithmo1692]

❤

[@torito2692]

You use the regular ink or special ink ?

[@lawlessreff1913]

I have a question. I’m starting a tumbler business. What would be the sizes for a 30 oz skinny tumbler ?

[@HannahHolman-wo9be]

Do you have a video doing sublimation shirt?

[@adoreniaapparel1363]

i cant get mines to stay at the 9.323. Im very new to your page

[@lindavanhoy7125]

i have a problem with my green turnsyellow when pressed and my blue dont press .it stays on the paper . what can i do . is it my ink . i have used all types of sub paper.i have tried different temp and time .i even change up on color setting. Help

[@sharenalatrese408]

It sounds like it may be your ink. It's a mess and a challenge removing ink.

[@marylumembrila6415]

i am finding it impossible to download the silhouette studio 😖 it has so much adds to download other stuff and its just stuck on the installation process

[@mannylopez6277]

what paper cutter is that you are using if you don't mind me asking

[@shaunicedanielle6354]

What kind of printing paper is being used?

[@5iftyandfabulous]

LOOKS GREAT! YOU DONT TAPE THE TOP AND BOTTOM?

[@sharenalatrese408]

LOL No need, but if you want you can

[@meghanmoss8360]

What software addition do you use? My silhouette studio does not allow me most of the stuff you have.

[@manniemoe]

I tried using this video to help me become more familiar with the steps of doing this but, when I push the print button and I’m at the screen where u can change the settings, my screen doesn’t show me as many details as this lady’s screen does.

[@spiritfilledchick1811]

Go into your computer settings. Go to printers and scanners. Then go to your printer. Then follow her directions from that point.

[@jasminmoore877]

Hey love I started my tumbler business and have been having an issue with the image not transferring. To the tumbler. I set my heat press to 385 for 55 sec then 30 seconds and when I unwrap it nothing is on the tumbler , the paper turnt brown and hot so I know the heat press machine works . I have tried different temperatures and double wrapping it with butcher paper. Do you know what causes this or how it can be fixed I’m running out of options and I don’t want to give up on my business

[@mrsellisfamilypythons1776]

My printer settings don’t show the same at all. I did step by step. But once I hit print it don’t give me the same options. Also I did sizes exactly how you said but it came out too short. I need help

[@sharenalatrese408]

Try going into your settings then printer and devices and select your printer the try changing the preferences if that doesn’t work once you select print for your image the print option box pops up you can try changing there. It has to be there if you followed step my step. Also with that size you have to cut exactly on the line not to much or it will come up short. I have that issue too sometimes and I personally think that some tumblers are 20oz but differ in sizes sometimes so you can also go up in size. Try the size 9.33 or 9.34 x 8 this should give you extra to work with. Let me know if you still need help. 😊

[@ryanrivera3637]

How does copyright work for something like that design you have? Would you be allowed to sell it since its not the exact starbucks logo or could they still get you for copyright since everyone knows what it is?

[@amberflores9461]

I keep getting ghosting and my black is not dark enough. Any suggestions?

[@gabbyyoung7627]

What was the printer information?

[@ninidavis5535]

Hey, what's the name of the app you like to use? Again other than Photoshop?

[@moniquestovall7874]

What size paper do you use?

[@CathyPeters-p5e]

What is the size for 12oz tumbler

[@letreviamcgrew6124]

Ugh. I don’t any of the silhouette devices, what can I do alternatively for free or a cheap price?

[@sharenalatrese408]

You don’t need silhouette devices to work that program I don’t have silhouette devices either lol

[@letreviamcgrew6124]

Thank you. I got it now, my computer was acting slow and wouldn’t download silhouette

[@edwardfonseca9509]

Hello where I could print my picture

[@CoCoBiZoU]

Hi can I use any printer or does it have to be a specific printer to do these tumblers ?

[@AdornedEvents]

Hello, Great video. What paper do you use?

[@sharenalatrese408]

A- Sub or Htv ront sublimation paper

[@nestorismaelflores3625]

mine came out all faded and the the heat tape left marks all over the tumbler 😭

[@Abby-uw2qb]

What ink do you use for your sublimation

[@sharenalatrese408]

It’s called Tonha Sublimation ink on amazon

[@jestinehargrove3178]

I dont have them printing features

[@philisamorales4729]

How much do you charge for your tumblers?

[@sharenalatrese408]

20-25

[@yolandalewis8948]

I'm having the same issue. I unlocked and tried to change the width and the height and it would back to its original size. I'm stuck

[@jeanicejoseph8040]

I am having issues why my wording is coming out backwards on my tumbler? Ughhh?

[@89desirea]

Did you mirror the image?

[@monsesoriano855]

What is the app you use

[@sharenalatrese408]

Silhouette studio

[@letreviamcgrew6124]

@@sharenalatrese408do I have to purchase the equipment or what do I do to use silhouette?

[@annaprann6908]

Please send the App name for miroir

[@Babecavenyllc]

Thank you ❤