This is THEE BEST video on how to use the Ken Onion sharpener!!
@AGuThing9 ай бұрын
Thanks bud!
@nor42774 ай бұрын
Also watch the work sharp videos, they are pretty good.
@robertcalkjr.83254 жыл бұрын
Good job! I have watched a bunch of videos and you are the first person that seems like you actually read the user manual.
@AGuThing4 жыл бұрын
Thanks for the feedback!
@Michael-hs6ii5 жыл бұрын
Every time I sharpen with the Ken Onion my eyes water
@ElkArrow3 жыл бұрын
It's much better with salt
@adampoll49774 жыл бұрын
A tip for your nicer knives. Put tape on the flat of the blade where it contacts the guide or the grit will eventually leave long scratches on the knife.
@tweakrr993 жыл бұрын
Yes, definitely do this! I was shocked at how badly the plastic guides were able to scratch the steel blade face.
@james64543 жыл бұрын
What exactly do you mean? Like put a tape along the part right above the sharp end? Looking to get one of these and I do have nicer knives.
@adampoll49773 жыл бұрын
@@james6454 Yes, basically cover the length of the blade just leaving about a cm above the edge clear.
@adampoll49773 жыл бұрын
@@tweakrr99 Yeah, it's grit from the belt being rubbed between the blade and the guides. If it's a quick little job a wipe of the guides every couple of passes helps as well.
@Irishguy3343 жыл бұрын
Amazing easy tip. I’d never had thought of that. Thank you 👍
@paula.24222 жыл бұрын
I also use this same sharpener and it's refreshing to see someone using it correctly and explaining why you don't pull completely through. Good job!👍
@AGuThing2 жыл бұрын
Appreciate the feedback! Yeah, you can instantly round out a tip using this incorrectly.
@bigviper644 жыл бұрын
Excellent video!...You took your time to explain thoroughly on how to use this machine..The “Burr” is critical and it takes a couple of tries to get the “Feel” for it. Once that has been learned, the rest is fairly easy...Thanks for your patience while educating the rest of us...
@davidaxman5 жыл бұрын
It is so silent after the leather belt! Wow that's sharp. Good work and good video!
@charlieneely28594 жыл бұрын
Super informative video, thanks my man
@ChickenFriedBBQ5 жыл бұрын
great video, i just got one and a doing a bit of research on how to use it, thank you!
@markmywords7914 жыл бұрын
What does that even mean, research? Does it work or not? Surely you can tell from the first knife you try?
@mdamdtraveldoc71835 жыл бұрын
excellent video. Thank you for making.
@DZNTZ2 жыл бұрын
Just a side note - ALL of the European style knives (Classic, Ikon, GP, etc.) have a 28 degree sharpening angle. I would’ve assumed something more like 17-20, but luckily most manufacturers post the angle info nowadays. I was trying to sharpen a Classic at 20 degrees and not getting a burr - until I searched and realized why! If you have a knife that you cant find angle info on, you can hit the edge with a Sharpie and see where it’s removed (or not) and adjust angle accordingly. Hope that helps, thanks for the great video!
@AGuThing2 жыл бұрын
Great tip! Thanks for sharing
@scottselby61127 ай бұрын
If you are on both the angle guide and the edge guides you will not be pushing down hard as both provide hard stops for the blade to travel in. Also, doing the same number of strokes on each side doesn’t make sense as you could form the burr with one or two strokes. Not every maker hits the centerline of the steel when making their blades. Just check out most knives from CRKT.
@meaty1097 күн бұрын
I just got mine.....Where did you set the speed.....or rather....what did you set the speed to? TY
@mvanalst20035 жыл бұрын
I own a nearly full set of the Wusthof classic Ikon knives! Thank you for posting this video and helping to give me some motivation and confidence that this can be done with my new Work Sharp KO sharpener. I’m now subscribed for more great content!
@AGC8284 жыл бұрын
I didnt see any hairline scratches along the side of the knife above the cutting edge. Were there any? Some complained about that with the Work Sharp's and the Chef's Choice electric. I wondered if/when there were scratches it wasn't "human error". My only CON is it puts a convex bevel on the knives. If the knife didn't originally have a convex grind some people might not want to change the bevel profile. though a convex is actually better in that it would cut through items easier then one with a visible 2ndary bevel. Will this belt-grinder always create convex edges?
@AGuThing4 жыл бұрын
I haven’t had any issues with hairline scratches on chefs knives or full flat ground pocket knives. I have however gotten some scratches on saber ground knives due to the thicker spine. The convex edge for me was actually a pro and a selling point. I prefer a convex micro bevel. I tend to get some convexing hand sharpening on a stone too. But yeah, if you do not want a convex edge, this is not for you. No way to avoid it with the work sharp.
@AGC8284 жыл бұрын
@@AGuThing ok. Good to know. Maybe I'll consider one.
@TheWoodStroker5 жыл бұрын
Place a tomato with a flattened surface on the table and try to cut it without holding it and see if your knife will slice through it. Tomato skin offers resistance paper does not and is a better test for sharpness. Also, take a piece of copy paper, fold in half, stand it up. Without holding the paper see if the knife will cut down the fold. If it can cut that without buckling the paper, that is SHARP.
@chuckdawg27992 жыл бұрын
reviews and use for this thing are all over the map.
@bobskaftfeld561111 ай бұрын
Terrible sharpener! Great duller of scissors though!
@foodexp472911 ай бұрын
Sounds like user error on your part. I have the same machine and it works marvelously.
@bobskaftfeld561111 ай бұрын
@@foodexp4729 I F in think not!
@foodexp472911 ай бұрын
@@bobskaftfeld5611 so how do you explain the fact that everyone who uses it properly, myself included, gets hair shaving sharpness using this machine?
@bobskaftfeld561111 ай бұрын
@@foodexp4729 Your assessment, Im guessing is based solely on the users who chose to respond to the KZbin video. I don’t doubt their experience. I have contacted the support team at Smart Sharp and followed their instructions to the letter with no better results! I guess I have a defective sharpener! Not to difficult to pull a knife through a guide against a belt. It would be interesting to know how many folks were disappointed with this sharpener that didn’t chose to respond!
@jawaring43673 жыл бұрын
"Here I am checking for a burr like an idiot on the wrong side" I was wondering why you were feeling it like that and then cracked up at the voice over
@AGuThing3 жыл бұрын
Lol yeah, I was like hmmm, this is taking longer than I expected to feel anything… oh… duh…
@dustind2923 жыл бұрын
The wife just got me one for Christmas and I spent the first part of the day sharpening all the knives in the house. Just because, I had to start with my Kershaw Blur, as it's a Ken Onion design. Next, I did my 8" Ken Onion Rain Series chef knife and WOW! It brought it back to better than brand new. Next I did my Shun 8" classic, my Shun 8" Sora, my 8" Wusthof, a serbian chefs knife, all my paring knives, and a Henkel and Victorinox filet knife. Super easy to learn how to use (everyone should follow the techniques in this video). I have friends who've been using the original Work Sharp for years and it's still going strong. I'll be ordering the leather stroping belt after this is posted. Thanks for the great video.
@AGuThing3 жыл бұрын
Nice! Enjoy it. I’ve gotten to the point where whenever I go to a friends place I’ll casually inspect the state of their kitchen knives and then offer sharpening services as necessary. 😂
@dustind2923 жыл бұрын
@@AGuThing lol. Just did the same thing tonight. Went to a friend's and brought it with me. Did their pocket knives and a few kitchen knives.
@AGuThing3 жыл бұрын
Dustin D Ha! Sometimes it blows my mind how dull some people’s daily use knives are. How do you live like this?!
@loucyphers_nightmareАй бұрын
Ya, my knives are so dull they couldn't cut a fart, will be ordering this sharpener tomorrow
@scuffmacgillicutty75093 жыл бұрын
Many thanks for this video. I know I'm a little late, but as others have said yours is the best one for the Ken O. edition. What a great channel I'm subbed and will be back for some cooking advice. I'm also looking at the Spydy Para 3 but for now I do carry a Spyderco Chaparral for my EDC. I have decided to get one of these sharpeners, mostly for my kitchen knives, and mostly due to your review. But I have one question. I don't see the leather strop being available anywhere. The replacement belts are available at source, but not the strop. Is the strop from a different supplier? Any advice would be most welcome sir. Thank you. Have a great day.
@AGuThing3 жыл бұрын
Really appreciate your feedback and support! My para 3 lightweight and benchmade bugout are the 2 that make it into my EDC rotation the most often. Here’s a link to the strop in the video. amzn.to/2SAX7L3 You may need to stretch it slightly to get it on the first time. To be honest though, I don’t really use it anymore. While it takes a little longer I’ve found it’s easier to use a wood mounted leather strop and the results are just as good.
@scuffmacgillicutty75093 жыл бұрын
@@AGuThing Thank you so much for your swift response. The link is a big help, and for the price I think I will at least give it a try. Re-watching the above video convinces me that this is the proper tool for my needs. I have a local kitchen store that has "a guy" who sharpens knives, but it means I go without my knives for a week or 10 days. I also enjoyed the time lapse sunrise video, and you've now got me thinking about a coffee and chili rubbed New York strip as well. Stay well. Until next time, Cheers!
@AGuThing3 жыл бұрын
@@scuffmacgillicutty7509 Nice! It really does a great job. One thing to be careful of though, make sure you don’t move to slowly and overheat the edge, it can ruin the temper of the steel at the edge and make it prone to chipping. Better off making additional passes rather than moving slower on each pass. Good luck and feel free to reach out with any additional questions. If you end up trying the coffee rub, I’d love to hear what you think!
@deplorabledave1048 Жыл бұрын
I have owned a set of classic Wustoff chefs knives that cost me $300 way back in 1996. I keep them sharp, but I never really attained that like new factory edge. I just paid for the Ken Onion ELITE BUNDLE Work Sharp AND a full set of 1" Low deflection belts for my EDC Wharnclife CPM 158 and D2 steel knives. I can re profile my EDC down to 10 degrees which ought to be interesting.
@natural-born_pilot3 жыл бұрын
Thank you for making this video. I own one of these and watched several videos on them none of which are as good as yours. I’ve learned a lot from your video and picked up several good tips. I’ve read through all the comments and questions and learned a lot from the answers and advice you gave. This is an excellent video.
@jamesgu44173 жыл бұрын
Thank you for the feed back. It is truly appreciated!
@RazorsEdgeDIY2 жыл бұрын
@@jamesgu4417 great job, I was wondering why you only used 1 side of the leather strop?
@AGuThing2 жыл бұрын
@@RazorsEdgeDIY Thanks! You can only use the leather strop on the edge trailing side. Using the other side, the blade would cut into the leather.
@RazorsEdgeDIY2 жыл бұрын
@@AGuThing Oh, I see. Thank you for the great info on the Work Sharp electric products! I have the newest guided Elite system that I'll be reviewing soon along with alot of other products. I'm just starting my channel so there is no content YET 😉 its called Bright Lights EDC! Coming soon to a theater near you, lol!😂🤣
@AGuThing2 жыл бұрын
@@RazorsEdgeDIY Good luck to you! Subscribed!
@brianconley17324 жыл бұрын
I do wish I had a channel and got one free!!!!! And how long do the new pads last??
@AGuThing4 жыл бұрын
Are they doing that? I paid for mine! Lol. They last quite a while. I haven’t kept track exactly but I’ve definitely sharpened over 2 dozen knives on the original set and they still look good.
@nor42774 ай бұрын
Work Sharp Ken Onion version is so amazing easy to use.Backed by a great company.
@farva375 жыл бұрын
Off topic, what knot is that on your bracelet? Snake or fishtail?
@jamesgu44175 жыл бұрын
farva37 Good eye! Snake knot.
@oklikeuknow48279 ай бұрын
So when sharpening the right side of the sharpener the belt is moving away but when sharpening on the left, the belt is moving into the blade? Is that ok for the knife? You’d think the belt would just get cut riding into the blade like that.
@AGuThing9 ай бұрын
That concerned me at first too but haven’t had any issues. I’ve also looked at both sides of the edge under a microscope and you can’t tell the difference. If you think about it, even sharpening on a stone, some techniques call for edge trailing strokes, and others call for edge leading.
@oklikeuknow48279 ай бұрын
I appreciate it thanks@@AGuThing
@blueraid152 жыл бұрын
across the grain?!? lol
@icebear4849 Жыл бұрын
Only problem I got is it doesn't go to 14 degrees which I love with kitchen knives cause it tends to make it sharper than a 15
@scarter1764 жыл бұрын
Great video
@jukio02 Жыл бұрын
I took the guides off. I do a better job sharpening it without them.
@AGuThing Жыл бұрын
Nice! Also prevents leaving scratches on the blade, happened to a couple of pocket knives I had when sharpening with the guide on.
@heavy1metal5 жыл бұрын
Bought the same leather belt, sucks it is so thick it rubs the plastic. First use and I have the same black stripe.
@AGuThing5 жыл бұрын
heavy1metal That sucks! How much does it rub? Would stretching it out a bit help? Mine actually doesn’t rub on the plastic. Just barely clears it. The black stripe is from the polishing paste removing metal.
@kentkovack85913 жыл бұрын
I can't find the leather strop belt for the Ken onion edition on Amazon or the work sharp web site. Where did you find it?
@jamesgu44173 жыл бұрын
I purchased it from eBay. However I will say that after using it for a while, I now prefer using a traditional wood block mounted leather strip over the leather belt on the work sharp. It offers more control and consistency.
@jhebertutube3 жыл бұрын
Work Sharp no longer makes a genuine leather belt. They’ve gone over to a pair of fabric material belts with two different grits (red and green) for fine and finer polishing.
@zleggitt19895 жыл бұрын
Picked mine up today but mine came with a 6000 grit polishing belt instead of the leather belt. I think the polishing belt is a lot better idea then the leather because you can go against the grain using the guide instead of free handing it with the leather.. That did not look comfortable
@AGuThing5 жыл бұрын
zleggitt1989 Is the 6000 grit belt you got the full width one or the skinnier one? I got the skinnier one and just can’t seem to get a good result with it. Either way, regardless of how high a grit you go, I always recommend finishing with a strop. Go with a regular wood block leather strop if you’re more comfortable with that than the belt on the work sharp. Stropping serves a different purpose and will still improve an edge on a blade that I put a mirror finish on with a 10k water stone.
@terryf513111 ай бұрын
Great job ..love it... shouldn't have to push my knife through bacon!!! Gotta love Bacon! Thumbs up my man.👍
@AGuThing11 ай бұрын
Bacon makes everything better!
@j.p.45414 жыл бұрын
Thanks for posting, does this put a convex edge on your knife?
@AGuThing4 жыл бұрын
J. P. Yup. Definitely creates a convex edge. That was actually one of the selling points for me.
@markmywords7914 жыл бұрын
Learning curve? Does it work or not???
@AGuThing4 жыл бұрын
Yes it does work. Learning curve as in in takes a little practice to get consistent razor sharp results. I’d recommend practicing on a cheaper knife first so you don’t accidentally round the tip or remove to much material on your favorite knife
@34stzoo Жыл бұрын
You didn't have to cut Morgen Freeman!
@AGuThing Жыл бұрын
😂
@ciscog3600 Жыл бұрын
W😲W!! U sliced Morgan Freeman like butter🤭 good vid Thanks!👍🏽 Just bought the thing!
@AGuThing Жыл бұрын
🤣 if you need any help with it feel free to drop a question here. Have fun!
@1ronhall5 жыл бұрын
My KO sharpener just arrived ...... thanks for the video as I hope to get my knives that sharp ....... or ruin them ........ either way; they are visiting the sharpener this weekend
@AGuThing4 жыл бұрын
Ron Hall Good luck! Follow the directions and you should have razor sharp edges in no time. Don’t rush it, but don’t go too slow either, you don’t want to overheat the edge - a mistake I’ve made. Still gets hair shaving sharp but the edge gets dull very quickly if overheated.
@markmills87944 жыл бұрын
This sharpener looks like it will get the job done. However I have my eye on the tormek. Keeps blade cool so I wont have to worry about the temper.. Good video. Only thing I wouldnt like is doing the leather and trying to do the 2nd side on that thing.
@AGuThing4 жыл бұрын
mark mills Yeah... for kitchen knives I’ve just been hand stropping on a leather strop mounted on a wood block. For pocket knives it’s a lot more manageable and I still use the leather belt on the work sharp. Couple of quick passes on just the leather really extends the time between full sharpenings on my EDC.
@Mohamma19727 ай бұрын
Speed ?
@shawnlavigne90693 жыл бұрын
Nice exp 2. My first time with the work sharp I was able to get crazy sharp, better than I can get on the tormek. And so much faster. Although I've gotten very sharp with tormek, but you gotta work for it. The works sharp is pretty well fool proof with a bit of common sense and experience with sharpening. Hey, that's not a rolex. It's a seiko quartz which I've not seen before.
@AGuThing3 жыл бұрын
Agreed! 2 things I would tell people to watch out for are scratches along the side (blue painters tape fixes that issue) and making sure your motion is smooth and consistent to prevent overheating the edge or creating an uneven spot. Watch is a Seiko SUN025, sportura kinetic travelers GMT.
@shawnlavigne90693 жыл бұрын
@@AGuThing 👍
@carlpavey7167 Жыл бұрын
Honestly the strop technique you use is a trip waiting to the er. 😮
@colesnyder76405 жыл бұрын
Poor Morgan Freeman
@daveschuetz8447 Жыл бұрын
Where is the directional control?
@AGuThing Жыл бұрын
There isn’t one. Side will be edge leading and the other side is edge trailing. I was concerned at first too but after using it and studying the edge under magnification, there was no discernible difference visually or in use.
@anyadatzaklatszjutub9 ай бұрын
okay, you just sold this, thanks man
@AGuThing9 ай бұрын
Lol. Enjoy - all you and your friends knives will be hair shaving sharp in no time!
@flightographist4 жыл бұрын
The touch of self deprecation was good, mirrored by the knuckle cut...maybe previous knife, from a previous take? Thx for the review.
@AGuThing4 жыл бұрын
Haha. Thanks. Also easier on the ego for me to own it and say it than have 100 comments pointing out my error and calling me an idiot. 😂
@jamescostello65292 жыл бұрын
Instead of the paper test it should be the over ripe tomato test. Cut that and it's sharp!
@crashbunks4 жыл бұрын
does it matter what angle you sharpen the knife at?
@AGuThing4 жыл бұрын
The One Yup, depends on the knifes steel and intended application. For example, VG10 Japanese chefs knife I’ll sharpen at 15 degrees per side where as I’d do a camp machete at 22 degrees.
@crashbunks4 жыл бұрын
@@AGuThing How do I know what angle to sharpen the knife at? Any general rule?
@AGuThing4 жыл бұрын
The One there are some general guidelines but no fixed rules. If you told me what kind of knife it is and what will you be using it for I may be able to give a more specific recommendation. General guidelines I used would be: German steel kitchen knives typically 18-20, Japanese kitchen knives ~15, pocket knives ~20, knives or tools for chopping ~22-24.
@crashbunks4 жыл бұрын
@@AGuThing Kitchen knifes for everyday use
@AGuThing4 жыл бұрын
The One Would you know what kind of steel they are made from or what brand they are? For example for an 8” chefs knife if it was a cheaper Cuisinart knife made from 440 steel I’d sharpen at 20 degrees but a Shun made from VG10 I’d sharpen at 15. The cheaper steel isn’t hard enough to maintain that keen of an edge.
@copasetic2165 жыл бұрын
“Checking for a burr like an idiot on the wrong side”... Lmfao at least you’re honest haha
@user-wr6wo6vr8r3 жыл бұрын
Did I just watch you slice Morgan Freeman in half
@AGuThing3 жыл бұрын
Lol. I guess so. I hadn’t noticed until rewatching the vid just now.
@Lightnings3 жыл бұрын
For a freshly bought, but rather dull knife, do you recommend starting with the medium grit as well?
@AGuThing3 жыл бұрын
Depending on how dull I may even start with coarse, check for the burr every swipe or 2, move to the other side as soon as you feel any burr then move to the medium belt as soon as you feel any burr on the 2nd side.
@manickbarry7 ай бұрын
Nice video I’m getting one today
@SteleaTube2 жыл бұрын
how many knives can you sharpen with a single belt? thanks
@AGuThing2 жыл бұрын
A lot! Still using the original belts after using them dozens of times. Haven’t kept track but I’d say at least 30 sharpenings. Maybe not as aggressive as the beginning but still very much adequate.
@topgunablek2 жыл бұрын
6:00 Only one thing , u should disconnect power when changing belt
@AGuThing2 жыл бұрын
Good call out!
@pardwayne Жыл бұрын
Maybe this is dumb, but when you switch sides, the belt runs in the opposite direction. Is that bad for the steel surface?
@AGuThing Жыл бұрын
Lol. Not dumb at all. I was a little concerned about this at first too but haven’t had any issues. Even under magnification, you don’t see any difference.
@jkherberger5 жыл бұрын
I believe that little "T" shaped piece is supposed to be vertical and not horizontal. Can you confirm?
@AGuThing5 жыл бұрын
J Herberger For shorter blades you leave it vertical. For longer blades you flip it horizontal to help support.
@jkherberger5 жыл бұрын
@@AGuThing OK, got it, thanks!
@Nestta52524 жыл бұрын
With the strop, why not flip the blade over so the edge is facing up and use the other side. Than pull awkwardly like that?
@AGuThing4 жыл бұрын
Nestta5252 There’s not enough clearance on the other side with a chefs knife. At that angle the handle of the work sharp is in the way. I’ll admit it looks precarious in the video but I felt in full control while doing it. I’d recommend moving the work sharp around and finding what’s most comfortable for you.
@janmos493110 ай бұрын
Где такой купить? Сколько стоит?
@nor42774 ай бұрын
Work Sharp or Amazon
@JamesDC423 жыл бұрын
I have the Precision Adjust and I used it on a Svord Peasant. I don't know if it's the steal but I can't get it to push cut.
@AGuThing3 жыл бұрын
Do you strop after sharpening? That is often times the difference between being able to push cut and not. If you don’t have a leather strop and polishing compound you can actually get a pretty good result using a newspaper or magazine.
@ivanhu4 жыл бұрын
Nice video. Just one thing, why are you stropping into the blade? That goes against conventional stropping wisdom.
@AGuThing4 жыл бұрын
Thanks! I’m actually not, the belt is moving downwards on that side so the strop is edge trailing, moving away from the blade. That’s also why I’m flipping the blade to strop the other side rather than using the other side of the machine like with the grinding belts.
@snooka2484 Жыл бұрын
Thank you. I just ordered this sharpener.
@AGuThing Жыл бұрын
Nice! Every blade in your home will be razor sharp and you’ll still be looking for something else to sharpen. 😂
@coreywhite1272 жыл бұрын
Great video!!! Is that a Ken Onion leather strop and where did you buy it from?
@AGuThing2 жыл бұрын
Thanks Bud. Here’s the strop. amzn.to/3pJ5SjB
@LayzeLyfe3 жыл бұрын
Dam that is a sharp knife. I tried to cut butter with mine and failed lol. Good price for that sharpener also.
@AGuThing3 жыл бұрын
😂😂
@AntwanNicholson8 ай бұрын
The best video using this so far.
@saadspeeds25524 жыл бұрын
هل يوجد وكيل في العراق
@nono5592 жыл бұрын
How flush should the spine of the knife be against the guiding slot?
@AGuThing2 жыл бұрын
Fully flush but just resting against it and not pushing too hard against it.
@Run4urlife134 жыл бұрын
You think this can handle my lawn mower blades too??
@AGuThing4 жыл бұрын
Smokey Tokey It should. Works great on my 20” machete. Probably no need to go beyond the coarse or medium belts.
@thebowieman6213 жыл бұрын
u want the belt to go up while sharpining man not down
@AGuThing3 жыл бұрын
I was a little concerned about that at first too, the way the machine works, it will go up for one side of the knife and down for the other. After using it for a while and inspecting the edge under magnification, there was no appreciable difference between the 2.
@erichusayn4 жыл бұрын
I ripped the angle guides off of mine and just do it freehand. Can get a scary sharp edge on kitchen knives....
@EpicSolutions20222 жыл бұрын
Great video, where did you purchase the leather strop for the ken onion?
@AGuThing2 жыл бұрын
Thanks bud! Here ya go: amzn.to/3FnxyQx
@CMTheHollow3 жыл бұрын
Would this work on japanese knives?
@AGuThing3 жыл бұрын
It would in that it can handle the higher hardness (I’ve sharpened S30V pocket knives with it) and the keener angle. However I wouldn’t recommend it for any high end Japanese knives until you’ve got some good practice in with cheaper knives. Japanese knives tend to have much thinner edges and tend to be more likely to chip. On an electric grinding belt, there’s a chance you can overheat the thin edge and ruin the temper of the steel making it even more likely to chip. Personally I only use this for my western kitchen knives and pocket knives and hand sharpen Japanese knives on water stones.
@NateBoyce17892 жыл бұрын
I thought Wusthof chefs knife had a blade angle of 14-15°? What made you want to change it to a 20°?
@AGuThing2 жыл бұрын
Modern Wusthofs are around 14 degrees. This one is close to 30 years old. Back then they were sharpened to 20 degrees. It wasn’t until Japanese chefs knifes became tremendously popular that western manufacturers started using harder steels and steeper angles. The steel on this knife is not hard enough to sustain anything more acute than 18 on each side and for the work this knife is generally used for, longevity of the edge is more important to me than a few degrees of extra sharpness.
@NateBoyce17892 жыл бұрын
@@AGuThing gotcha. Thanks
@thebowieman6213 жыл бұрын
very nice
@DennisNowland4 жыл бұрын
In other words, in this instance, you get what you pay for.
@brianconley17324 жыл бұрын
I’m getting one at end of this month but is it possible to use too much pressure on the pads and mess up the knife???
@AGuThing4 жыл бұрын
Brian Conley It wouldn’t quickly mess up the knife but over time, inconsistent pressure or draw speed would lead to an uneven or wavy edge. I’d recommend using just enough pressure to keep the blade against the guide and letting the weight of the knife do the work. Careful to not pull the tip past the belt while it’s still moving.
@HIT0293 жыл бұрын
i want to. buy this. however i have come to know voltage required is 110. it will not work or the loose warranty if i use 220 with an adapter as well. has anyone used this with an adapter.
@AGuThing3 жыл бұрын
Ah that blows... sorry, I have no experience with this. Hopefully another viewer will chime in.
@nor42774 ай бұрын
Call work sharp
@rjvanloon47693 жыл бұрын
I must be doing something wrong. My Oneida chefs knife is (according to the info from Oneida) to be sharpened at 20 degrees. Tried it on the Worksharp, (made sure of the angle, 5 strokes on both sides, medium grit just to touch it up a bit) it came out duller than it was before. Had to really work on the manual wetstones (yes, 20 degrees) to get it sharp again. Probably will have to practice a LOT and ruin a lot of cheap knives to get it to work for me, but that seems to rather defeat the purpose. Wetstone takes longer (in this case MUCH longer) but at least I can use it again
@AGuThing3 жыл бұрын
The first time using any knife on the worksharp, even if using the same angle it was originally sharpened to, will take more than 5 strokes on each side. The reason being you are going from a V edge to a convex edge. Don’t alternate sides. Sharpen one side until you feel the burr form along the opposite side (will probably take 8-12 passes the first time), switch to the other side for the same number of passes. At this point you should now feel a distinct burr on the first side. Switch to a finer belt and then alternate sides for 8-12 passes (4-6 each side), and it should be pretty damned sharp.
@rjvanloon47693 жыл бұрын
@@AGuThing Thanks! I'll try that. But I think I'll try it on a cheaper knife first anyway ;)
@AGuThing3 жыл бұрын
@@rjvanloon4769 Definitely a good idea to practice on cheaper knives first! However I’d recommend a cheap carbon steel knife like this one amzn.to/3t31YD6 over a cheap stainless steel knife. Even the cheap carbon steel knives will readily take a razor sharp edge where some of the cheap stainless steel knives will never get to that point no matter how much you sharpen them.
@sunil_20204 жыл бұрын
मिलेगा कहा साइट बताओ
@erick.76333 жыл бұрын
Thank you for this video. I was not sure to buy or not to buy, after this video I will buy definitely.
@AGuThing3 жыл бұрын
Nice! Definitely worth it if you don’t feel like whipping out the stones every time you need to sharpen something.
@katzsteel3 жыл бұрын
How often do you have to sharpen your chefs knife? I just bought the ken onion unit and of course used it wrong the first time it looks like. I just locked it on low speed run and pulled the knives through. Also, do you have a link to the leather strop you use?
@AGuThing3 жыл бұрын
It really depends on the knife steel and how often it’s used. The Wusthof in the video get sharpened probably every 6 weeks. It’s used almost daily for chopping vegetables, meat, deboning chickens etc. My Miyabi SG2 santoku that is only used for vegetables and boneless meat only needs sharpening every 6 months or so. Here is the strop: amzn.to/3rMm3ff
@ColFrankFitz2 жыл бұрын
Have you got a link for the leather strop?
@AGuThing2 жыл бұрын
Here ya go! amzn.to/35BGSUQ
@darylcheshire16183 жыл бұрын
does the strop come with the belts or is it purchased separately?
Thanks! It’s the Sportura Kinetic GMT. Reference SUN025.
@AGC8284 жыл бұрын
Is your wife Chinese/Mandarin? :) Looks to be a good tool to consider as most of us don't want to spend the time to learn to use whetstones. I'm not sure I'd spend the time. My only CON is for some they want to keep the bevel. Using the belt will create a convex bevel...which really isn't a bad idea performance wise...will move through food easier than had it a bevel. Is it easy or hard to keep a bevel in your time with this tool? Not using the angle guide...Or have you found using a belt-grinder design you will inevitably end up creating a convex edge? And I am considering the Wusthof Classic IKON series of knives..How do you like the knives? What made you choose them over the Classic? Or the other lines Wusthof makes...
@AGuThing4 жыл бұрын
Anderson C My wife is Chinese... but that’s my mom that’s in the background. Lol. With any belt grinder you’ll always end up with a convex edge as there will always be a little slack in the belt. This was actually a selling point for me when considering the Work Sharp. I prefer a convex edge. Not only does it slice better, it maintain a workable edge for longer too. In terms of which set to get, I’m sure you’ve heard it before, but it truly does come down to how it feels in your hand. As long as it’s good quality steel with a good heat treat and Rockwell hardness appropriate for your intended use, how it feels will make a bigger difference than the brand or the line. For example, I end up grabbing my $45 Nexus nakiri way more often then my $300 Miyabi in SG2 because it’s more comfortable for the way I hold and cut. If possible I’d strongly recommend finding a store where you can at least hold them before buying or at the very least finding an online retailer that offered free returns.
@AGC8284 жыл бұрын
@@AGuThing I agree. And great service. You DO have to decide if you're only with changing the bevel. Are not. Being a home chef it shouldn't matter.
@georgedeitrich46474 жыл бұрын
The family is about to set down and eat. You get your knife out and start to cut the roast up. The knife is to doll to cut. Do you really want to go through all this? You go out to the garage to sharpen the knife. I can see the wife coming at me with an ax. And I don't think it is that she wants me to sharpen it also. The Trizon XV will do very near as good and save an argument with the old lady and maybe a divorce.
@troy34567892 жыл бұрын
@05:31 do you cut right through Morgan Freeman?
@AGuThing2 жыл бұрын
Lol. Totally unintentional! I love Morgan Freeman.
@troy34567892 жыл бұрын
@@AGuThing I'm just razzing you. Great video
@AGuThing2 жыл бұрын
@@troy3456789 😂
@troy34567892 жыл бұрын
@@AGuThing I just watched another movie with Morgan Freeman in it: "Hitman's Wife's Bodyguard". He delivers a convincing portrayal in every movie he takes.
@AGuThing2 жыл бұрын
@@troy3456789 cool. I’ll check it out. Haven’t seen that one yet.
@phototae23 жыл бұрын
you are griding one side top to the bottom, and other side griding bottom to the top. is that ok griding knife like that?
@AGuThing3 жыл бұрын
That’s correct. That’s the only way to use this machine, scratched my head at that a little too when I first got it but haven’t noticed any differences or detriment from it.
@phototae23 жыл бұрын
@@AGuThing i see
@AGC8284 жыл бұрын
If only it had more agile choice. E.g. 14, 12.5 (misen, Mann Kitchen), 10 (Enso by Yaxell)..9... So we could sharpen Miyabi's
@AGuThing4 жыл бұрын
Anderson C While more adjustability would certainly be welcome, I wouldn’t recommend sharpening those high HRC Japanese steels with this anyway. They are chippy to begin with and with such a thin edge you can easily overheat it and ruin the temper with what’s essentially a mini power belt sander, making the edge even more prone to chipping. My SG2 knives are sharpened on water stones only.
@adampoll49774 жыл бұрын
@@AGuThing Keep in mind the belt creates a convex edge, which is tougher and less prone to chipping. I have all my kitchen blades now profiled to 15 and they are sharp enough for anything and hold it well.
@AGuThing4 жыл бұрын
Adam Poll Great point! Just be extra careful with very thin edges not to overheat and ruin the temper.
@adampoll49774 жыл бұрын
@@AGuThing Yup, that's where the speed control is so great. I tend to run my finger down the side of the edge every few strokes and have never felt any real heat developing.
Is the stropeing pad the same as the piece of leather style for wood carving knifes!!!
@AGuThing4 жыл бұрын
Brian Conley Yup, pretty much
@brianconley17324 жыл бұрын
Should I spend my money on this one or go with a similar style for a hundred dollars less??? For performance and quality I would pay the extra money because I have a leather strap for my carving knife but can’t get an edge to even cut soft butter!!!!! And I stroped it like twenty times per side and my results are terrible and I followed the instructions word for word..... I would be the best person to try this and I would give a great review if it worked and I am that person that reads front to back of manual!!! Being on disability and getting 672$ a month to live on I would pay for a razor sharp edge!!!! But if I didn’t get good results I would say so and why....but I know I would never be sent a free one but watching this video is changing my mind and I don’t buy this equipment for just personal use and I would use it to help the elderly people in my building for free!!!! I guess I can dream!!!!! I want to try this model because all your videos have me blown away from what I see...... God bless you all and keep safe!!!
@AGuThing4 жыл бұрын
Which other ones are you considering? Between the Ken Onion and the regular worksharp I would say the Ken Onion is well worth the extra money, for me at least. I have many different knives that I sharpen to different angles. If you just have a few knives you’re ok with them all being sharpened to the same angle (I forgot what angle the WS is) than that’s probably fine for you. Stropping alone won’t do much of the edge is already dull. If you’re on a budget, you could look into getting a cheaper water stone like a King double sided and learning how to sharpen with a stone. Once you get the hang of it, you can actually get a better edge than with any machine.
@texiceman4 жыл бұрын
I saw this once before... *does it not matter that the belt travels UP one side of the knife and travels DOWN the other side of the knife? -Is it possible to pull the knife through the same side but in the opposite direction? (Does it still work if you spin the machine around?). Or can you only pull in one direction?
@AGuThing4 жыл бұрын
Texas Mann You can pull through on the same side but in the opposite direction. However for me at least, it felt cumbersome and I wasn’t getting consistent strokes and so didn’t get as good a result. Could probably get better at it with practice but after examining the edges under magnification I couldn’t tell a difference between the up side and the down side so am just sticking with using it the way shown in the video.
@BiltonginParis11 ай бұрын
I have same question. It seems counter intuitive to let the belt run up against the edge, will the edge not bite into the belt and risk cutting the belt? I have used a rotating disc sharpening method in the past and rotation against the edge of the knife would ruin de disc. I always had to sharpen away from the edge
@sonora1085 жыл бұрын
I have one of these on order, can't wait to try it out on my edc.
@AGuThing5 жыл бұрын
Sonora108 Awesome for edc folding knife. I go through all the grits the first time around to reprofile, after that literally 8 total passes, alternating sides, on the fine belt once a week keeps it razor sharp.
@hayamayama3 жыл бұрын
When using the leather strap is it a MUST to remove the guide? Can’t you just keep it maintain the correct angle?
@AGuThing3 жыл бұрын
Hayama Yama It’s too thick and won’t fit with the guide. Also, when stropping I generally go with a slightly lower angle than the sharpening angle.
@hayamayama3 жыл бұрын
@@AGuThing due to your video, I actually bought a KO rather than the smaller model. Still exploring my way around it, but was pleased when I tested it with a CN200L will try it with a maximit next time.
@AGuThing3 жыл бұрын
Hayama Yama Good luck! Let me know if you have any other questions on it’s usage.
@joseveliz218 Жыл бұрын
I saw several comments mention overheating. How can you look out for this?
@jeremyspencer12663 жыл бұрын
Thanks for making this video!
@AGuThing3 жыл бұрын
My pleasure!
@brandonnoyb3191 Жыл бұрын
Awesome video thanks. What is the best compound to use white or green?
@AGuThing Жыл бұрын
Either would be totally fine. I’ve used, white, green, blue and even a few diamond pastes going as low as .25 microns. You cut a little bit ore of a mirror finish on the very edge with the diamond pastes but to be honest, I couldn’t tell a difference in cutting performance and edge retention.
@brandonnoyb3191 Жыл бұрын
@@AGuThing thanks for the info.
@AGuThing Жыл бұрын
@@brandonnoyb3191 my pleasure
@ElkArrow3 жыл бұрын
Just got mine last night. I sharpened 4 blades but none of them can cut paper. I have a feeling I'm going to be buying a lot of sharpening bands for this system
@jamesgu44173 жыл бұрын
There’s definitely a learning curve. If you post a video of what you are doing I’d be happy to take a look and see if I can identify what adjustments you may need to make.
@ElkArrow3 жыл бұрын
@@jamesgu4417 Nah. I'll just continue and learn by my mistakes. I have Japanese water stones just in case. I also ordered some leather stroping bands. Those should help
@jamesgu44173 жыл бұрын
Erich Diehl sounds good. Good luck!
@AGC8284 жыл бұрын
I didn't notice any scratches on the side of the knife. Were there any? I ask because other users have complained about that. I wondered if it wasn't their own fault. Maybe you could do a follow-up video. With close-up shots of your finished blades? How long have you had it? Used it a lot??
@AGuThing4 жыл бұрын
I’ve used it quite a bit over the last year. I’ve never had issues with scratches on chefs knives and thinner pocket knives. I do get scratches on thicker spined pocket knives and hunting knives. What I noticed is it if you don’t keep the guides clean, loose grit builds up on the guides and that will badly scratch up the knife.
@AGC8284 жыл бұрын
@@AGuThing Good point about build up on the guides. Not mentioned in other videos. Might consider one for my German kitchen knives.
@AGuThing4 жыл бұрын
Anderson C I would recommend this product. I’ve been very happy with it. One other thing to be careful of though is pulling too slowly and letting the edge heat up to much. It can ruin the heat treat and the very edge becomes brittle and prone to chipping.
@Sherif1324 жыл бұрын
Does the leather strop comes with the rest of belts ?
@AGuThing4 жыл бұрын
Nope. I purchased it separately on eBay. After using it for a while, I’d actually recommend a wood block mounted leather strop over this.