Sharpening mower blades on a Husqvarna YTH lawn mower without taking the deck off

I show you how I sharpen my blades on a lawn mower without taking the deck off. Husqvarna YTH
Thank you very much for watching and God bless
quick clamps amzn.to/3evsH4n
torque wrench 1/2" drive amzn.to/2Q8q40d
flap sander disk amzn.to/3dv2eUX
grinder amzn.to/2VEzuAp
Bible ESV easy to read amzn.to/3qshNQP
Bible NKJV amzn.to/30ns322
Titan solar generator (large generator) poweredportablesolar.com/ref/48/
Go pro that i use amzn.to/2WC6WXH
my wireless mic Rode wireless Go amzn.to/2WxQt7c
*Full transparency. I am a participant in the Amazon Services LLC Associates program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.
*Disclaimer - Thank you for visiting my KZbin channel. Please understand that the content on the DIY jim KZbin channel is intended for informational purposes only. I make no warranties about the completeness, reliability and accuracy of this information. Any action you take upon the information posted on my KZbin channel is strictly at your own risk, and I will not be liable for any losses and damages in connection with the use of my KZbin channel.
#HusqvarnaYTHlawnmower #sharpenHusqvarnablades #sharpenlawnmowerblades

[@DIYJIM]

****click read more**** Here are some links to some of the tools that I used. Thank you very much for watching and God bless quick clamps amzn.to/3evsH4n torque wrench 1/2" drive amzn.to/2Q8q40d flap sander disk amzn.to/3dv2eUX grinder amzn.to/2VEzuAp *Full transparency. I am a participant in the Amazon Services LLC Associates program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites. *Disclaimer - Thank you for visiting my KZbin channel. Please understand that the content on the DIY jim KZbin channel is intended for informational purposes only. I make no warranties about the completeness, reliability and accuracy of this information. Any action you take upon the information posted on my KZbin channel is strictly at your own risk, and I will not be liable for any losses and damages in connection with the use of my KZbin channel.

[@CJRodriquez-uq2xt]

Don't 😊

[@DIYJIM]

@@CJRodriquez-uq2xt don’t what?

[@Kimberly-ul1ph]

Thanks Jim. Since my husband passed away I am slowly starting to try doing the things he always took care of. I have watched quite a few of your videos. I managed to change the oil in the husqvarna riding lawnmower last week after re-watching your video on that. (Didn't do it nearly as clean and smooth as your video showed but I got it done!!!) Just bought new blades for it (It has 3 blades) thinking I might learn how to change them out and sharpen the ones that are on it. (My husband did the sharpening too) I like your videos because you get right to the point, show what tools you are going to use, have good lighting and camera angle, tell important details and fast forward through some things that just take time. Thank you. God Bless!

[@DIYJIM]

So glad I could help you. When I get comments like this it helps me stay motivated to make more videos. I love to help. Is there any other videos you would like to see? I’m sure your husband is looking down on you and very proud. God is good.

[@Kimberly-ul1ph]

@@DIYJIM I am sure something will come up that I can ask for a video on👍😄❤

[@newbluerugby]

God Bless you Kimberly . I can’t imagine my wife in your shoes. I feel for your loss

[@fitztastico]

I'll say what all your viewers are thinking but too afraid to say - your biceps are in a league of their own 💪👍

[@DIYJIM]

Thanks I starting working out again about a month ago

[@boboconnor5861]

Good, simple explanations. I'm lucky I have the same mower, it really helps.

[@DIYJIM]

Glad it helped

[@Kristine-f7u]

That helped this 76 year old lady.

[@DIYJIM]

You are very welcome

[@johnlyngdal8601]

Watching your method for balancing blades made the video excellent in of itself. Simple and effective solutions are always appreciated.

[@DIYJIM]

Thanks for watching

[@rayalliston7702]

I have the same mower, so this channel is fantastic for me. Thankyou

[@DIYJIM]

Welcome thanks for watching

[@russellrogalski4826]

Explained subject matter very well , gave me confidence to do the job myself.

[@DIYJIM]

Thanks for watching

[@fwolfe404]

Hi Jim, Thank you so much for doing these videos. They're very well detailed, and extremely helpful. GOD Bless!

[@DIYJIM]

You are very welcome

[@TheOzarkExplorer]

Thank you too for taking the time to make these. I just got one of these (Used but in great shape) and it's really great to learn from you before working on it.

[@DIYJIM]

Glad I could help!

[@user-ti1jj2sq1r]

Thanks Jim! Great to know ow to take care of this mower myself... really appreciate the safety steps too!

[@DIYJIM]

Glad to help

[@brandonreasy1799]

Great tutorial

[@DIYJIM]

Thank you!

[@hallraker79]

Great video. I have the same mower, just with a 42" deck and with the Craftsman name on it. I took the deck off once a few years ago, and after that I decided I'd get a jack! In my case, I bought a second set of blades so I could just throw the sharp ones on and get the lawn cut, and sharpen the previous set later. My dad had an old Poulan Pro walk behind (also Husqvarna/AYP) and right before he gave it to me, he put the blade on upside down! I couldn't figure out why it cut so poorly because it had always been a great mower! 🤣

[@DIYJIM]

Blades sure do cut better when they’re not upside down. Lol thanks for watching

[@SimpleMeFPV]

5 cotter pins remove the whole mowing deck. It’s easier to remove the deck and not work upside down. Thx 4 taking the time to make this video. I like your balance method 👍

[@DIYJIM]

thanks for watching

[@dbohler8640]

Another great and helpful video, brother. Thank you.

[@DIYJIM]

Your welcome thanks again for watching my videos

[@kevincutler]

Just did this after watching your video thanks!

[@DIYJIM]

Your welcome

[@michaelcopsrichards9192]

this is very explainitory keep up the proffeshonal works,(Michael comments)

[@DIYJIM]

Thanks for watching

[@victorventura7]

Really helpful,thank you.

[@DIYJIM]

Glad it was helpful! Thanks for watching

[@robertscianna187]

Excellent demo!

[@DIYJIM]

Thanks

[@NiteOwl497th]

Very helpful. Watched your oil change video… great info.

[@DIYJIM]

Thanks for watching

[@bladedspokes]

Thank you for this!

[@DIYJIM]

Welcome

[@moss8448]

Have to do this myself on the exact model thanks man. The grass started looking like I was trying to beat it to death.

[@DIYJIM]

Hope it helps you thanks for watching

[@mikel917]

Excellent! Thanks

[@DIYJIM]

Glad I could help thanks for watching

[@larrybrown2850]

Great video.

[@DIYJIM]

Thanks

[@edwinr1954]

Thanx!

[@DIYJIM]

You're welcome!

[@dredai]

Great video. If only taking the blades off were that easy

[@DIYJIM]

Thanks for watching

[@kingstonoldie2447]

Never hurts to clean off dried grass chunks from deck underside while you've got the mower raised. ? Any need to lube the retaining bolt threads when remounting the blades? Good, practical video, thanks for making it available.

[@DIYJIM]

I have never lubed the bolts when putting the blades back on. Thanks for watching hope your summer was a good one.

[@justinsane7128]

So glad you got an orange one now, that green and yellow one was hideous

[@DIYJIM]

I'm just helping my neighbors out and making videos to help others.

[@BillyColeII-dr6dk]

I have a Husqvarna T1942 being delivered Monday, 14 Aug.....hope you take questions...LOL

[@DIYJIM]

I try to answer questions. Thanks for watching

[@timjohnson2990]

Great video! When installing, should the 2 blades be pointing in the same direction? Or another way of putting it, at the same angle?

[@DIYJIM]

I don't think it really matters. thanks for watching

[@timjohnson2990]

@@DIYJIM thanks!

[@jerrykennedy7781]

What if I don't have and cannot a torque wrench? I will be using 1/2 drive impact driver. Will that produce enough torque?

[@DIYJIM]

Yes I’m sure it will. For years I did not use a torque wrench.

[@madhugerstner1801]

Question, what tool did you use to sharpen, and where can I buy it. Thanks

[@DIYJIM]

flap disc and grinder it is in my description and first comment

[@ghibliinu6616]

Well done! But why not use cinder blocks? Too fragile?

[@DIYJIM]

They can break if you are not careful

[@jerrykennedy7781]

I might have missed it but??? Do you have a video that teaches how to change the hydrostatic oil in Husqvarna YTH-20K46 mower?

[@DIYJIM]

Sorry no I do not

[@jerrykennedy7781]

Is it possible for you to make a video of this? You've got teaching skills.

[@DIYJIM]

@@jerrykennedy7781 sorry Jerry not sure I can do that now. Maybe next summer. I will have to ask my neighbor to see if he wants his changed.

[@Buck_Buchanan]

I also have a problem with my lawnmower randomly starting up without putting the key in it, sitting in the seat, engaging the parking break, and starting the ignition.

[@DIYJIM]

Sorry never seen this problem. Hope you get it figured out.

[@Buck_Buchanan]

I was just making a joke about you unplugging the spark plug lol

[@DIYJIM]

Lol 😆

[@myrnajackson531]

How do you level a Husqvarna riding mower deck that got a broken bracket

[@DIYJIM]

I think I would try to fix the bracket. Hope you get it figured out

[@FlowPat]

First

[@DIYJIM]

You could say a little more than first was it a good video

[@FlowPat]

Yes it was dad

[@panzerabwerkanone]

Why would you disconnect the spark plugs? The blades are not connected directly to the engine shaft as on a push mower. Also your blades are not engaged by the PTO when not running as there is no power to the PTO or the ignition. Seems like a useless step.

[@DIYJIM]

you don't have to i agree but some people on KZbin get excited. Thanks for watching

[@AustinfromNashville]

You can never ever ever ever be to safe with something that can kill or decapitate your appendages

[@Clemson-rc2yq]

Did he buy a new mower ??

[@DIYJIM]

Nope, thanks for watching

[@arvestrandsphotography]

you ( and about everyone in the other side of the world ) needs to learn how to pronounce husqvarna. h u skvarna forget the q

[@DIYJIM]

Thanks for watching. If that’s all I have to worry about I guess I’ll be ok. lol