She's Jacked And She's Back ☆JEEP STUFF☆

[@SquareMax]

squaremaxmerch.com/ We appreciate all your support

[@brandonevans4142]

Nice work on that rear door gap patch👍

[@SquareMax]

@@brandonevans4142 Appreciate it buddy

[@Gabriel-mg6om]

SWEET JEEP!

[@SquareMax]

@@Gabriel-mg6om We appreciate it

[@andycornell201]

Hell yeah boys! Happy past turkey day!

[@SquareMax]

@andycornell201 Thanks buddy. Same to you. Hope it was a goodin

[@rustymohr6652]

This is the BEST thing I've EVER seen built on KZbin!! I WANT ONE!!! Someone else will probably comment on this but your "favorite little hammer" there is a brick masons hammer.

[@SquareMax]

@@rustymohr6652 Appreciate it buddy

[@jorgecide]

You've worked hard on the truck, honor your work with quality bodywork and paint job.

[@SquareMax]

@@jorgecide Appreciate that man

[@getnbetr01]

It can be a family project between u and bro!!! U guys seem to work good together!! Make it a bug out vehicle project!! Ur doing good!!! 👍

[@SquareMax]

@@getnbetr01 Most definitely

[@MichaelMcFearin]

Sweet coming along well and the wife had a cool project.

[@SquareMax]

@MichaelMcFearin Thanks buddy. Hope you enjoyed your weekend

[@Wil_Liam1]

That bed looks just fine and perfect on the J crew cab..

[@SquareMax]

@@Wil_Liam1 Appreciate it buddy

[@Thisappaintreal]

That’s wheel & tire combo is beautiful. Jeep should make em like this still

[@SquareMax]

@@Thisappaintreal I agree

[@roycervantes1341]

Good morning Square Max buddy,,,,,,,,, Yeee Yeee 😊

[@SquareMax]

@@roycervantes1341 Morning buddy. Hope you enjoy this week's video

[@roycervantes1341]

Awesome video ​@@SquareMax,,,,,,,Yeee Yeee 😊

[@marknewman570]

Looks great, I don't think it looks long at all, it's got great proportions.

[@SquareMax]

Morning buddy. Appreciate it

[@shanewright6958]

The Jeep is looking good. Another great video 👍👍

[@SquareMax]

@shanewright6958 Appreciate it buddy

[@kalybnielsen4183]

When you weld the doors, comments say go slow, that's correct, but weld a piece of angle iron across the door, small tacks to hold it, it will keep it from warping and pulling everything out of square/flat. Its a cool looking truck, it would be awesome to see it with a good paintjob, tractor paint, super durable and excellent coverage

[@SquareMax]

@@kalybnielsen4183 Appreciate it buddy

[@outdoorsmansgarage]

That's the coolest truck I've seen in a long time. These are the projects I like most. I've been building cool stuff like this for 38 years in that time I've learned the welds don't have to look pretty to hold together all you need is a good grinder.

[@SquareMax]

@outdoorsmansgarage Absolutely man. A grinder will make me the welder i aint. 😆

[@DeeEva548]

I would not waist my time or money rattle painting the truck yet. A bunch of work left to do. Work wize. And would love to see your junk cars and trucks. Enjoy the channel.

[@SquareMax]

@DeeEva548 Morning. I think we will do a junk yard walk around eventually. I'll save it for a week I'm running late on video as a back up.

[@StarlightWorkshop0z]

Wait on paint. Never know the channel might go nuts and you could do a decent paint job. 🎉

[@SquareMax]

@@StarlightWorkshop0z Hopefully it does good

[@vincekartes7145]

Heck yea! Way to start my Friday with a J-maxx update! And at 58yo I’ve never seen the wrench on the screwdriver handle but I dig it and know I’ll be using that trick in the future! Cheers guys✌️

[@SquareMax]

@@vincekartes7145 Morning buddy. It's the little tricks that save us time.

[@Thom1973]

Good day SquareMax you doing a great job keep doing you and always love seeing you wife's art projects

[@SquareMax]

@@Thom1973 Morning buddy. Appreciate it

[@Thom1973]

@@SquareMax we appreciate you

[@mohawkgarage]

Fantastic job on the rear doors! It's really coming together now. I really like how your wife's painting progressed as the truck did! Cool cat, too. lol

[@SquareMax]

@mohawkgarage Appreciate it buddy. Glad you enjoyed. Hope you have a great weekend

[@ArthurRowley-zj2db]

That is a rock hammer

[@SquareMax]

@@ArthurRowley-zj2db I love that hammer

[@michaelgargone4480]

Nice fab work country style always great videos

[@SquareMax]

@@michaelgargone4480 Appreciate it buddy. Hope you enjoy your weekend

[@LeonardMagnusson]

thank you for the show sir.

[@SquareMax]

@@LeonardMagnusson Morning buddy. Appreciate you watching

[@the_ran_dumb_car_guy]

I can’t wait to see it in paint. Keep up the hard work guys, it’s looking great!!

[@SquareMax]

@@the_ran_dumb_car_guy Appreciate it buddy

[@roycervantes1341]

Awesome trick with screw driver and wrench square max😊

[@SquareMax]

@roycervantes1341 Appreciate it buddy. The little tricks are what save us hours

[@coachgeo]

great ideas. Folding down or leaving the top sticking out some on existing roof at that end will help with rain while driving not getting driven under that Chrom and getting pushed into the cab.

[@SquareMax]

Appreciate it buddy. I do plan to seal that all up when we do the body work

[@OpieDogie]

You guys have a lot of work left on that crew cab jeep truck. Then too, you’ve got a bunch done!! Keep plugging along, I like watching.

[@SquareMax]

@OpieDogie Appreciate it buddy

[@MichaelHigginbotham-c1l]

All right man the screwdriver trick is pretty cool I'm going to use that one at work how much times square Max taught me peace and keep up the good work the build is awesome

[@SquareMax]

@MichaelHigginbotham-c1l Morning buddy. Glad I could be of assistance

[@Turd_Buster]

He is a good mentor. Ive been learning from him for over 30 years

[@SquareMax]

@Turd_Buster Appreciate it buddy

[@geoffberry1874]

Your more talented than most , i actually restore old vehicles for a living but really like how you freehand custom stuff, love it

[@SquareMax]

@@geoffberry1874 Appreciate that alot buddy. Thank you

[@jacemusgrove3073]

Wow! The jeep plays with my eyes, but it's super cool when compared to the squarebody!

[@SquareMax]

@jacemusgrove3073 Appreciate it buddy. Hope you enjoy the rest your weekend

[@DPaint-v5j]

That rear flexi brake looks tight. Needs longer and looping. You hit max extension looks like it would be streching . Maybe camera angle. Or needs check straps. Nice bit of welding work. Its all good fun. Good to see family getting along real good. Makes for a better life. All around. Good for your kids to see this. 👍👍✌️

[@SquareMax]

@@DPaint-v5j Absolutely. I will have to go take another look. Appreciate it. Hope you enjoy your weekend

[@jeffryrichardson9105]

I for one love it the way it is!👍🏽😊❤️🇺🇸

[@SquareMax]

@@jeffryrichardson9105 Appreciate it buddy

[@robertstevison1448]

Lol I knew about it but it is awesome that you shared it with these youngsters lol

[@SquareMax]

@@robertstevison1448 Absolutely buddy. Anything that can save time

[@sdbougeno]

that truck looks great. nice work!

[@SquareMax]

@@sdbougeno Appreciate it buddy. Hope you have a great weekend

[@TonyCacioppo-zh8vp]

Good afternoon brother, Jeep project is coming along great. Congratulations on 13,000 subscribers.

[@SquareMax]

@TonyCacioppo-zh8vp Appreciate it buddy. Hope you enjoy the rest your weekend

[@TonyCacioppo-zh8vp]

Enjoy the rest of your weekend also

[@douglasclauson3133]

I think it looks awesome, those wheels and tires brought everything in to proportion

[@SquareMax]

@douglasclauson3133 Appreciate it buddy. Hope you have a great weekend

[@enjoythesho1992]

My vote is painting it the right way the first time sand it down bodywork and use good quality automotive grade paint

[@SquareMax]

@enjoythesho1992 Appreciate it buddy

[@rickywhite7578]

It is starting to look legit

[@SquareMax]

@@rickywhite7578 Appreciate it buddy

[@junkboxgarageOG]

This thing is sweet, you guys nailed it with the wheel tire combo. The stance is perfect.

[@SquareMax]

@@junkboxgarageOG Morning buddy

[@junkboxgarageOG]

@@SquareMaxhappy Friday, on to another weekend of shenanigans.

[@SquareMax]

@@junkboxgarageOG Same to you buddy

[@derelict_wanderer]

As far as I know, those rear chrome clips are unobtanium new. Don't throw them away. Gonna have to hit up a boneyard and find extras. Just clean them up and reuse. I'm pretty sure they're just rubber coated in something similar to tool handle dip coating. If you do find new ones, there are a bunch of FSJ people hunting them. Including myself. When welding large patches, I find the grinding part is more prone to warpage. So, I use a dremel with a small cutting disc to slowly nip away at the weld crowns, then flap disc the last little bit. Like others have said, slow and patient with patch work. And yeah, I'm a Jeep guy, but that tired 360 is definitely smogged too much for burnouts without proper gearing. Wagoneer axles don't have that gearing. People really don't realize how much smaller the FSJ platform is compared to other makes especially in the cab area. Impressive Gnome pilgrim!

[@SquareMax]

@derelict_wanderer Appreciate it buddy. If we do find them clips I'll try to remember to mention where we found them. Appreciate all the pointers. Always willing to learn

[@roycervantes1341]

Great video Square Max,,,,,,,,,,Yeee Yeee 😊

[@SquareMax]

@roycervantes1341 Thank you buddy. Hope you enjoy your weekend

[@roycervantes1341]

​@SquareMax enjoy your weekend to looking forward to next week's video 😊

[@SquareMax]

@roycervantes1341 I'm not sure what it will be on yet. Haven't decided what to work on lol

[@metalmangle]

You guys are killin it! She's lookin like a proper rig. The wheels and tires made a massive difference. And for what it's worth, I really dig the metal fab. (My favorite part of any build). The Thanksgiving mural is so cool. Also, I got my shirt and it's awesome! Thanks again..

[@SquareMax]

@metalmangle Appreciate it buddy. Glad you like the shirt. We appreciate all your extra support.

[@NikolaiAstaf]

Отличная получилась серия! Классное видео, Мне очень понравилось! Круто Круто!!!👍👍👍

[@SquareMax]

@@NikolaiAstaf Morning buddy. Glad you enjoyed

[@getnbetr01]

Stick to this build! I think ur onto something!! That jeep has the potential to look good!👍

[@SquareMax]

@@getnbetr01 I try to only work on it when my brother has free time as it's his. So usually only Saturday and little on sunday

[@bazilwreckerloughead]

That's looking so coo. It's the last 10% takes 90% of the time. I'll admit; I just learned the 'wrench on the screwdriver' trick!

[@SquareMax]

@bazilwreckerloughead Appreciate it buddy. Always nice learning new tricks. Hope you enjoy the rest your weekend

[@Turd_Buster]

Awesome video bud keep um coming. I want to see this truck keep coming along

[@SquareMax]

@Turd_Buster Appreciate it buddy. See ya in a bit

[@DPaint-v5j]

Looks great. Nice piece of trim. I had a 69 D200. It was a good Dirt runner. I found a good quilty trunk spoiler. I bolted to the roof rite were you working. You could stand in the bed and hang on to something . It def needs a solid grab rail. For Bed riding. Urban Surfing its called. 😂😂😂 good job Gents. 👍👍

[@SquareMax]

@DPaint-v5j Brother actually talked about putting a spoiler from the wagoneer on it lol. We didn't have cool name for it. Just tailgate surfing

[@Turd_Buster]

​@@SquareMaxnothing like a spoiler off a "Super Waggy"

[@matta5534]

It only looks long in the back bc it's darker. Once it's painted I bet it'll all blend together and look killer! I love it!✌️from Ohio

[@SquareMax]

@@matta5534 Appreciate it buddy

[@not4sale779]

When you weld the doors use small tacks and space them. Jump around. Air quench each tack to reduce warping

[@SquareMax]

@not4sale779 Appreciate it man. Always willing to learn

[@DPaint-v5j]

Id tape the line by the trim. Fill stainless with widow goope. Or black silicon. And push on stop water ingresing . Clean of goope and pull tape. You got a nice clean joint. Rain will roll that way..👍👍

[@SquareMax]

@DPaint-v5j Appreciate that man. We probably will do

[@sheepwolf1st]

YES!!!! Back on the Unicorn. Had that been built by Jeep it would have been a J5000 (J50). The last production model was the J4000 (J40). 😉

[@SquareMax]

@@sheepwolf1st Morning buddy. J5000 sounds catchy. I'm not sure what he's naming it. He keeps calling it the J4d.

[@sheepwolf1st]

@@SquareMax I'm an old school AMC fan and not arguing, rather educating... There was no "J4 - D" model in the lineup. The last was the J4000 (J40) which was 3/4 ton and 4WD. Had AMC built a crew cab model they would have given it the J5000 (J50) model number. Jeep's next model listed after the J40 are the military versions, M715 & M725. They had no A B C D of any model in the truck lineup. Whole numbers only... J1000 - J4000 commonly referred to as J10 through J40.

[@SquareMax]

@sheepwolf1st Appreciate it buddy. He called it the J4d To stand for Jeep 4 door. His nickname for it.

[@sheepwolf1st]

@@SquareMax It's actually a great nick. 👍

[@Turd_Buster]

​@@sheepwolf1stPlay on words off the J40 (J4D). I love my AMCs just always eneded up finding jeeps made by them instead of the cars. Someday ill own a Pacer but for now I got my FSJ.

[@davidortner9587]

that 4door jeep looking sweet. i know ur not doing a engine swap in that jeep but it be real sweet with a 12 valve cummins in or something

[@SquareMax]

@davidortner9587 Appreciate it buddy

[@Turd_Buster]

Would be sweet but need a doner truck for all that

[@gerardofuentes9351]

I’m 43 and I didn’t know the screw driver trick, but I’ll be using it from now on. Thanks

[@SquareMax]

No problem buddy. Appreciate you watching and commenting

[@Plushybear09]

No to the rattle can. A decent paint job would look mad

[@SquareMax]

@@Plushybear09 Appreciate it buddy

[@rubenurenaflores3352]

Perfect

[@SquareMax]

@@rubenurenaflores3352 Appreciate it

[@robertstevison1448]

Awesome evening brother how are yall doing great to see yall again the Ole gal is coming together beautifully

[@SquareMax]

@robertstevison1448 Hey buddy. We are all good. Hope yall well too. Appreciate it man

[@Matt-s4y]

I love it

[@SquareMax]

@@Matt-s4y Appreciate it buddy

[@livefree2041]

That would look bad ass as a dully😊

[@SquareMax]

@@livefree2041 It would look cool for sure

[@RickyGreen-t7s]

Looking better and better guys 👍👍👌 keep up the good work when you all are done with it you'll have to come park it in my driveway (HAHA)😅

[@SquareMax]

@@RickyGreen-t7s 🤣 Appreciate it

[@geoffberry1874]

Its a beast

[@SquareMax]

@@geoffberry1874 Morning buddy

[@junkboxgarageOG]

19:32 when you go to weld the doors, just go slow, do small tacks and move around from side to side to let the heat dissipate. The biggest enemy of welding sheet metal is heat.

[@SquareMax]

@junkboxgarageOG Appreciate it man. I will take all the pointers. Always ready to learn

[@TailgateGarage]

Get rid of the rust you can, treat what you cant, undercoat with fluid film!

[@SquareMax]

@@TailgateGarage Appreciate you commenting. Hope you enjoy your weekend

[@thebiggerbyte5991]

I love how this is turning out. My 2 pennies worth (I’m in UK 😀) is that I’d rather see the rust tackled properly and then a good paint job later on than a rattle-can paint job now - this truck deserves to be done right. As always, I really enjoyed the video!

[@SquareMax]

@thebiggerbyte5991 Morning buddy. We appreciate everyone's 2 pennies lol.

[@RickyGreen-t7s]

And yes if you get it so you can see them do a video on junkyard 👍

[@SquareMax]

@RickyGreen-t7s Absolutely man.

[@dennislockhart7290]

You could always put some LED clearance lights where the luggage rack was or both luggage rack and lights.. chicken lights and chrome..lol

[@SquareMax]

@@dennislockhart7290 That's definitely a good idea

[@DeeEva548]

Sounded good sir

[@SquareMax]

@@DeeEva548 Thank you

[@CliffordUusma]

Make it look good do it right even if it take’s more time

[@SquareMax]

@@CliffordUusma Appreciate you watching

[@hennessyremy4970]

6k and u will probably b done around 8-8.5. Is totally worth it. I gonna have one solid rig. That u now every nut and bolt about. So comfortable, spacious. No damn annoying car note for something full of computer bull crap. I hope u guy give this puppy a decent paint job

[@SquareMax]

@hennessyremy4970 I've actually never had a vehicle note and I probably have owned close to 500 vehicles. No lie

[@coachgeo]

that cut in passenger side.... thinkk you will still have to weld it. think It will vibration crack.

[@SquareMax]

@coachgeo Definitely a possibility

[@getnbetr01]

I must be an old timer… I knew that Rick lol 😂

[@SquareMax]

@@getnbetr01 Lol. I actually only learned it last year

[@not4sale779]

That was a real sheet metal hammer. Where did you get that? Most people think that is a block layers hammer. I know because I was a sheet metal journeyman most of my life. I'm not a jeep guy but I do like the crew cab alot. Good content

[@SquareMax]

@@not4sale779 I was a tin knocker for years. This hammer is small and has a sharp point on the end. I also have the ones with the 1" tip like most hvac guys have

[@woodchippers_WestWingDimeBag]

roof rack would look good add a lawn chair and umbrella for a walking dead look

[@SquareMax]

@@woodchippers_WestWingDimeBag 😆 absolutely would be killer

[@Wil_Liam1]

In order to do a decent paint job on it you'll have to strip it all the way down to bare metal anyhoo,so a ratyle can paint job isn't going to matter other than the cost and your time to do it... Rattle away !!! 😆

[@SquareMax]

@@Wil_Liam1 Appreciate you watching

[@brockryan3405]

Like 'Fack tree'. LOL!! Watch much VGG?

[@SquareMax]

@brockryan3405 Yes. I love Derek. One of the youtubers I look up to. Don't call them influencers for nothing lol

[@tommydanger2564]

Don’t rattle-can it. Be smart, don’t be dumb.

[@SquareMax]

@tommydanger2564 😆 your absolutely right buddy.

[@arthursmith5409]

Hey, Guys are you naming the Ole Jeep or did I miss that, somewheres back? But the screwdriver hack got me, forty plus years my elevated thinking only thought to use grip pliers, figure that... Another great but not f content and awesome seeing one of the Stars of both shows, The Jeep.

[@SquareMax]

@arthursmith5409 Morning buddy My brother has been calling it the J4D (jeep 4 door) It's not set in stone. Always nice to learn new tricks.

[@coachgeo]

Had that issue with spacing at doors on a cab that was just no longer square. Though never got around to doing it.. Solution planned was a very wide rubber trim that would slip on door edge. Apologize.... don't recall where I got the samples from to test the idea. Anyway.. hope it helps

[@SquareMax]

Appreciate it buddy. This j10 cab was actually in a wreck at one point

[@CliffordUusma]

Making the big money make shore to buy quality tools and it make the job easier put it back into what you do

[@SquareMax]

@CliffordUusma Definitely rolling in it

[@johnpaulheupel5713]

I think you should rattle can it until you decide to do the body work. Maybe OD Green, something flat so it doesn't show as many imperfections.

[@SquareMax]

@@johnpaulheupel5713 We definitely keep pondering the idea

[@Wil_Liam1]

Malco sheetmetal/duct hammer 🔨 is what he's using for automotive sheetmetal work,but hey,they work well for it and are usually cheaper to buy than a brand named body hammer...

[@SquareMax]

@@Wil_Liam1 I was a tin knocker for years

[@Wil_Liam1]

@SquareMax been there,done that,got the scars n t shirts..

[@anthonyscv1]

Try 3m body panel adhesive on rear door

[@SquareMax]

@anthonyscv1 Buddy I just typed that in Google and a bunch of dirty sites popped up 🤣 😆

[@SquareMax]

@anthonyscv1 Lol I found it. Glue. I type in (3m body anel) and spell check fixed it and

[@anytractorman]

You could just weld up the edge of the door or body to ajust the body line

[@SquareMax]

@@anytractorman Thanks for commenting

[@JakeGouge]

Looks good to me it’s not long

[@SquareMax]

@@JakeGouge Appreciate it

[@JakeGouge]

@ your Welome

[@woodchippers_WestWingDimeBag]

lots of sheet metal wielding how-to vids on youtube university practice on the pile of scrap metal, wield hotter than you'd think but just do little tacks this will give full pen so you can grind smooth w/o burning through go slow, skip around a lot so you don't warp back up gaps and old bolt holes with copper mig can't stick, it supports the edges to prevent melting through hammer an old pipe flat if you dont have copper plate rattle can and run it it looks good as a rat rod save the body work for a vette imo

[@SquareMax]

@woodchippers_WestWingDimeBag Appreciate all that buddy. Always ready to learn. Hope you enjoy your weekend

[@MarxHodge]

Hundreds of tacs and cool wit h air hose it will not worp the door panel.

[@SquareMax]

@@MarxHodge Appreciate it

[@jesseallan3886]

If you make it too nice, then you will be afraid to use it. My car is 50-50. From 50 metres away at 50kmh, it looks good. ✌️

[@SquareMax]

@@jesseallan3886 Your absolutely right

[@Turd_Buster]

My waggy is a 50/50 hoping to make the J4D a 30/30

[@hennessyremy4970]

🎉🎉🎉

[@SquareMax]

@@hennessyremy4970 Morning buddy

[@caseyspirit9385]

Use a piece of tape and then u can mark your bends as well

[@SquareMax]

@@caseyspirit9385 I didn't even think of that. Thank you

[@ezranobles1528]

How about a peace of crome like you did for the roof bed liner top to bottom and call it good and turbo for power and burn the wheels like your square body 😂

[@SquareMax]

@@ezranobles1528 A turbo would be cool

[@Aquafbody]

Lol I actually think it needs an 8' bed

[@SquareMax]

@Aquafbody 😆 morning man

[@ezranobles1528]

Bed liner it and call it good 👍

[@SquareMax]

@@ezranobles1528 I don't think he will go for that

[@SquareMax]

I don't think my brother will go for bed liner paint job

[@darondickenson2208]

I've got Grand Cherokee it just old beater has some rust n her and it four wheel drive use as a truck instead of suv

[@SquareMax]

@@darondickenson2208 That's awesome man. They are tanks

[@teigjames8076]

I'd rather trust the process and wait to see it painted until it's ready in your eyes. Oh and some chemical paint stripper might loosen up that decal stuff on the doors enough to scrape it off.

[@SquareMax]

@@teigjames8076 Appreciate it buddy. Hope you had a good weekend

[@robertchahulski8044]

The government will notice how it looks via satellite. Lol😂

[@SquareMax]

@@robertchahulski8044 🤣 😆 They are watching us all waiting to attack. Morning buddy

[@Dragnfyr]

Your wife is beautiful, patient and talented... I'd wager it would be a good investment to have her learn pinstriping... She could make good money doing pinstriping and murals...

[@Dragnfyr]

@SquareMax I have a book on pinstriping basics I could send you guys

[@SquareMax]

@Dragnfyr Appreciate it buddy. She is definitely my better half

[@SquareMax]

@Dragnfyr That would be awesome man. We would greatly appreciate it. I remember those books from when I was a kid. Our address is in the video description

[@greatbull67]

I think it would look best just rattlecanned flat black and rough.

[@SquareMax]

@@greatbull67 Thank you buddy

[@greatbull67]

@SquareMax it's a beastly looking rig. Let it eat

[@ezranobles1528]

Watch bad Chad 😂

[@SquareMax]

@@ezranobles1528 I do. Love that guy

[@darondickenson2208]

When will y'all be driving it can't to see that

[@SquareMax]

@@darondickenson2208 I don't have a clue man

[@ezranobles1528]

What are you going to do with it if it needs more power turbo will give you the burn out I'm thinking

[@SquareMax]

@@ezranobles1528 Chevy transplant 😆

[@Turd_Buster]

​@@SquareMaxdid I hear duramax?

[@SquareMax]

@Turd_Buster Lol. Probably not man. I have to many other projects going on to drop a duramax in

[@SquareMax]

@Turd_Buster Plus if we where going to go that route buddy. I woulda done a frame swap

[@Turd_Buster]

@@SquareMax i know but I can dream still

[@drewdane40]

Don't you still have the Wagoneer body around? You could have just cut the upper door jamb out of that instead of having to bend up a new one, couldn't you?

[@SquareMax]

@drewdane40 Piece was to short. I showed the Piece in video

[@roycervantes1341]

Hey Square Max did you sell or trade camaro I still see it in background

[@SquareMax]

@roycervantes1341 I still have camaro

[@SquareMax]

@@roycervantes1341 I did list it for trade. So we will see what happens