Shelby GT350 Ford Performance Oil Separator | Auto Fanatic

You can buy the Oil Separator Kit here amzn.to/2fJZEw5
Just a quick install of the passenger side oil separator for the 5.0 and 5.2 liter motors on the Ford Mustang GT and Shelby GT350 and Shelby GT350 R
the Drivers side is on backorder the the process takes seconds to install. This mod is suppose to help if you drive the cars hard and in the upper RPM range often.
We will do a test in a few months as we open the canister and discuss a cleaning procedure.
Questions or comments post below.
[e-mail]

[@jjoorriiss]

your channel is just perfect for owners of this car, thanks so much and keep up !!!

[@Fireship1]

I have one on my 2011 F150 5.0. I don’t drive it hard and it’s amazing how much oil I find in it. I empty it every few months. At least an inch of oil comes out. And I only have 54,000 miles.

[@adamnarbeaux5898]

Excellent video. Picked up a 350gt yesterday.

[@autofanaticcars]

Enjoy it there is a ton of Shelby GT350 content on my channel.

[@keving5896]

Hey do u ever have to clean the screen/filter part of the oil/air seperator?

[@Michael_00001]

Just ordered mine. Thanks for the vid

[@aaronmueller4976]

I handled the harness a bit differently on my install. I removed the installed push style panel clip from the air/oil seporator, and re-inserted the clip from the harness to hold that end of the seperator in. I kept the push clip, of course in case I decide to change it, but it seemed to make for a good install. Interested how it will work in the long run compared to your approach.

[@autofanaticcars]

I was considering this as well but the clips were different length and the weight of the box i was concerned since the harness clips captive teeth were not as long as the clips that came on the box. either way i doubt it matters lets see in a few months if this thing works for us. thanks for watching

[@alexandermurdoch4641]

I did the exact same thing and haven't had any issues yet. Glad to know someone else tried the same thing.

[@scottbarker9058]

THE PUSH CLIP ON THE EXISTING WIRELOOM/IS THE BETTER CHOICE OVER THE 1 ONE THE SEPERATER.+ LOOKS LOTS BETTER....THEY FAIL TO TELL YOU THAT IN THE INSTR.!!

[@davidpoehlein]

Thanks for that! Went out and pulled the supplied push clip and stuck the wireloom push pin back in. In the installation instructions (written in 2016) there was originally a third hole (between the mounting holes) on the mounting portion of the separator. Guess they eliminated the third hole in newer versions of the separator. Agree, looks much cleaner.

[@KaiatheSiberianHusky]

The 5.0 is different metal bracket. It also needs to be torqued down unlike the 5.2.

[@juanricaud2142]

Ty

[@ClayMurphy007]

Thanks, took seconds!

[@exogenouss]

Thanks for this explanation. Have you had any issues with the separator being secure in the engine while only being held down with two pop on clips? Especially with the high vibrations of the engine.

[@autofanaticcars]

no i never had any issues i have installed these on over 40 cars so far, just make sure you get the proper hose and unit orientation and do not break the factory push clip but if you do you can get clips at any Napa or Autozone

[@shanefowler9443]

@@autofanaticcars do I need an oil catch can if I have this installed?

[@BORIKKEN]

Shane Fowler that is oil catch can...

[@denisgloba3481]

How many miles did you have on the car when you installed it? I am at 640. Probably should have installed them when I got the car. Thanks in advance.

[@231mac]

The blow-by on these engines isn't horrible, but will build up with extreme use. It's not imperative to install one when the car's brand new, especially during break-in. You're good.

[@aeroelitemauro]

Hello friend! I have a new 2019 GT350 in Colombia. I already install this part (passenger side) but I couldn’t find the other side filter.. (pilot side) is this last one mandatory as well?

[@VerdeBoy13]

Where you ever able to get the pilot side filter?

[@aeroelitemauro]

Shocked Pika No! It’s more difficult to find it and I’ve heard that is not so necessary

[@KiraIRL]

unless you track it, driver side catch can is not needed

[@stevek917]

What does this thing do? Why would I need it? Why didn't Ford install this from the factory?

[@autofanaticcars]

stevek917 please watch my recent video of these on my channel

[@stevek917]

Auto Fanatic Thanks. That explains it. The question is why doesn't Ford install these at the factory?

[@KiraIRL]

@@stevek917 same reason Apple puts critical computer components next to heatsinks.

[@fillflashdetailer8838]

@@stevek917 From Ford Performance site: This part is designed and intended for competition use only or off-highway use only. It should not be installed on a vehicle that is driven on public roads and highways. Installation of this part on a vehicle driven on public roads and highways is likely to violate U.S. and Canadian laws and regulations relating to motor vehicle emissions.

[@stevek917]

@@fillflashdetailer8838 Good to know. Thanks.

[@dorian1112]

Hi, great video. I am getting one for my GT350. Do you think just the passenger side is sufficient? I do spirited driving, but don't plan on tracking the car. Thanks.

[@autofanaticcars]

i did both just for piece of mind up to you

[@the_xariux]

Does the separator void the factory warranty?

[@autofanaticcars]

Michael def not this is a ford factory part listed and sold at all dealers nationwide, it is def worth doing these as a good precautionary measure

[@the_xariux]

Auto Fanatic thank you! I'm looking at all angles for this car and making sure it's a good fit for me. Your videos have pretty much convinced me that I could do it. Keep up the amazing work 😎

[@autofanaticcars]

Michael great im doing a video tomorrow about winter driving this car and very important things you need to know, keep an eye out for that video this week. AF

[@the_xariux]

Auto Fanatic I will for sure. I live in Washington state so we have lots of rain so any info on wet or cold driving is helpful with this car.

[@timmyboy2495]

Anyone having trouble installing this on their 2020? Fitment is not good at all

[@autofanaticcars]

try reversing them to see

[@Michael-bu7ni]

@@autofanaticcars that worked for me, had to fit the 90 degree end (right hose) on the catch can side instead of the opposite, fits fine. Thanks for the video

[@drewsky1967]

How often to you empty this this thing out? I know they work!

[@autofanaticcars]

i checked it twice so far nothing inside to be empties except a slight film. Il check again next month

[@drewsky1967]

Auto Fanatic Interesting, the oil separators I had on the gt500 I had collected a ton. What did you do for engine break in?

[@autofanaticcars]

Drew K first 1000 miles drove it somewhat normal no revs past 5800, engine burned oil but i then switched over to Amsoil and zero consumption since. im going to check my separator today.

[@drewsky1967]

i think I will run the AMSOIL after my break in then, good to know this for sure.

[@Chief_5]

Does this effect the warranty?

[@juanricaud2142]

How much?

[@autofanaticcars]

click the link in my video description thats where i got mine

[@ede6539]

I have one on passenger side, what amount is normal to find or how often do you check it ?