Shelving Assembly

In this video Matt goes through the stages needed to assemble one of our Extra HD Shelving Units. If you need any further clarification please don’t hesitate to get in touch on 0121 296 2044. Alternatively, you can e-mail us at [e-mail]
Website: www.storageaffairs.com
0:00 - Introduction & Checklist
0:33 - Floor Protectors
0:52 - Side Bars
2:30 - Front & Back Bars
3:32 - Centre Support Bar
4:19 - Repeat Steps
4:26 - Upright Connectors
5:09 - Upright Bars
5:46 - Tiers
6:57 - Tabs
7:21 - Wooden Decks
7:35 - Quick Recap
8:25 - Bay Connectors

[@telsurrey1]

Picked this video to help my wife and I (86/76) assemble the rack. My wife was quite keen on using this one. I wonder why!

[@phlalp79]

Practical and clear step-by-step instructions. Thank you so much.

[@allaboutamit]

Great quality shelving units, and super fast delivery. Just ordered another set. Thanks for the video, although I managed without it. They are really easy to put up. I agree with the comment below,. Distracted by how handsome he is!

[@nicholaseager9201]

Yes. I wish he came with the Assembly Instructions as well.

[@judyy4480]

Much more helpful than the leaflet which comes with the unit

[@Jules_Pew]

It was easy enough to put together. Be careful when moving it into final position as the central connectors aren't tight and the top half can lift off. I had great customer service from them.

[@knoxieman]

Great video, nice and clear, just ordered 4 sets of these and if they work well will order another set of 4, they look really well made for the money.

[@QingdaoGuanyuPlasticCoLtd]

The name of our company is Qingdao Guanyu plastic. Our company started its activities in 1999 to Manufacturing and sales plastic storage bin&plastic turnover box.Our shelf bin dimensional chain is complete and matches most shelves. Good raw materials are the basis of good products. Qingdao Guanyu promises that all raw materials are new raw materials for petroleum refining, and never use recycled materials. If you have any ideas on how to work with us, please contact my Email [e-mail] whatsapp:[phone]

[@breakfastwithdonald]

Nice clear instructions, well presented, thanks.

[@stevenlyttle3626]

Really helpful video - this made constructing the shelves really easy!

[@gavingold4661]

didn't even get a leaflet.

[@sairhug]

@@gavingold4661 Ridiculous, isn't it? Yet you get a 20-page booklet with a toaster :-/

[@kaylajanehayes]

my shelves were a bit different. The middle support piece was explained perfectly! I didn't have any instructions. Thank you

[@angelrenie]

I had to rewatch it over and over again. I could not concentrate. I could not listen to what he says... I’m just looking at how handsome he is. lol! What’s his name?

[@wayneturner1331]

I folded the tangs (as he does on the central pieces) on the upright joining pieces when assembled to lock the top to the bottom.

[@richardpaton1939]

Video is much clearer than the instruction sheet which is unfortunately the poorest part of the product. Quality is good and the customer service is excellent. I had one unit arrived damaged and replacement parts were shipped out the next day. Planning to buy some more.

[@jonnyswalk4674]

Plainly the fella goes to the same gym as myself 😉

[@Sheldon1411]

This was sooo easy to build!!!

[@sairhug]

Well - I guess I have to go and buy a mallet and protective gloves, now. Annoying that these requirements weren't specified in the Amazon ad.

[@kaylajanehayes]

the shelves can slice your fingers, I used my regular hammer but with the middle of hammer.

[@snsfrnd]

It would be better to have some close up shots of joints when clipped in. How to joint 2 racks.

[@amandabarrie4090]

Helpful altho I was distracted by how handsome he is ;)

[@EgoShredder]

He might hammer your frame if you ask him nicely.

[@sharrjack6879]

Mine came with a mallet...yippee x

[@feli___b]

My idea is to buy 4 of these and put my bed on the top to make a loft bed. Would it be secure enough? I weigh 80kg and the bed and mattress about 120kg

[@yehcool9784]

Feli Boscardin you prob need something more industrial. Good idea though!

[@mikeusher421]

Easy to put together, shame the shelf supports had a 5mm gap between them and the shelves. (luckily had a bit of 5mm ply to use as packing)

[@UKtilly]

What are the small bits he had left on the floor when he put the last shelf on then that vanished?

[@makers_lab]

Connectors for securing with any adjacent units.

[@dottyap]

Can I get extra connectors? Are those available in the local hardware? Got 3 boxes of 5 levels and stacked 1.5 set each. Now I lack 4 connectors to complete the work.

[@vickiemoore1517]

I couldn't concentrate 😅 Jesus he's fit 🤣🤣

[@TheQuiet1]

Do the Upright Connectors go on the inside or outside of Half Uprights?

[@UKtilly]

The first upright connector he put on the outside the other when zoomed in was on the inside. What is correct?

[@normangrieve6226]

You are correct. It's on the inside

[@Yasmines17]

My unit is really unstable. I have to drag it around instead of carrying it or it all falls apart. I used the mallet but the clickers still come out. What can I do?

[@reno.zed1]

Mother of god.

[@sebastiangraah7792]

Good,

[@dk785]

My unit has 8 plastic feet in the box, am I missing something?

[@ceds6297]

Yes you are missing something! You can make two 900mm high work benches instead of the full height rack.

[@lesleydickson7746]

Wish it told me I needed a mallet before I ordered. 😕

[@EgoShredder]

I received a mallet but did not use it, as its too lightweight. I used a regular hammer and a cloth, to make it easier and avoid damaging the paint.

[@user-xj1zs4mo5q]

Garbage