Assembly Help Video on how to build a Racking Solutions Economy 5 Level shelving unit. www.rackingsol... Tel: 01977555007 email: sales@rackingsolutions.co.uk
Пікірлер: 35
@kissfan6321Ай бұрын
Like the way you did the first part by laying them flat!! Most vids I've seen people stand them up. Much easier this way.
@crazyjaneyb2 жыл бұрын
THANK YOU SOOOOOOOO MUCH! I cast this video onto my TV and followed the instructions to build my G stack shelving unit! I was struggling with the instruction booklet. 👀 someone explain in such a simple fashion was invaluable!!!
@tomkeena11373 жыл бұрын
I've just bought six of these units for the garage. Delivery was very quick. The first one went together fairly easily. It took about an hour but the rest should be quicker now that I've done one. Pity they didn't make clear that the units come with a complimentary rubber mallet. I went out and bought one a few days ago. It looks like pretty good quality kit and will do the job. I like to option to split a unit and make a work bench out of it. Overall pretty pleased.
@Andyiow2 жыл бұрын
Thanks for your video, I purchased a similar unit and gave up on the first day, watched your video and completed it in an hour.
@liz81792 жыл бұрын
Thanku soooo much for this video, slowly done so one can see how to assemble the shelving. For a woman it was more than helpful, thanx again.
@delroybent94682 жыл бұрын
Thank you very much. This is so much better than the instructions or any other similar videos 👍🏿👍🏿👍🏿👍🏿
@lorrainehilton5204 Жыл бұрын
Thank you so much my units came with no instructions so thank god I found you the assembly you done was so easy to follow 😊
@VassilisManoussos2 жыл бұрын
GREAT VIDEO! Thank you. Bought the smaller racks and they arrived on time, well packed, in great condition but the instructions were so poor. I could not imagine that this would be so easy to do!
@FrancesMaggs Жыл бұрын
Very good video - much more helpful than the instructions that came with the shelves. Our shelves did not come with a rubber mallet, or gloves ... . I found some of the tabs went to the outside of the uprights as I attached the horizontal supports so I had to redo those, but then I checked carefully each time to make sure that wasn't happening.
@GradKat6 ай бұрын
The assembly is pretty straightforward, although some bits on mine took more than a couple of taps to get them to fit into place. Also, you don’t mention that the tabs on the central supports need to be bent inwards (just takes the pressure of a thumb) so that they will slide through the slots provided for them. It’s a nice neat shelf unit when assembled, perfect for a garage or shed.
@spicymame2 жыл бұрын
THANK YOU! THANK YOU! THANK YOU! The instructions didn't show any details on the 4 connector parts. No order on how to assemble each part.... You have truly save my sanity.
@julieedwards47833 жыл бұрын
Thank goodness for this tutorial as there were no instructions with the box! Found some in another box but to be honest the tutorial was much more informative :)
@sabirakarim29713 ай бұрын
Well done your demonstration is excellent well explained Thank u so much I don’t even hve the manual I m going to give ago 🌺
@Dave_Jee2 жыл бұрын
Much better than the instructions in the box. Thanks I didn't get a rubber hammer 😨
@scottieScottScott4 күн бұрын
The company I work for recently bought a wider version of this, sadly it doesnt come with the cross member location slots and anything heavier than a pillow the shelves collapse and buckles the long sections.
Merci , vous m'avez bien aidé .Mais tout seul , c'est pas évident :-)
@jhunrugay3026 Жыл бұрын
Nice idea boss.ty.God bless..
@carolhackett9512 Жыл бұрын
Don’t think it is as easy as this video. Some of the parts were missing which I still need to sort out. It certainly does not clip together as easy as this video makes out. It does not clip together then a small tap with mallet. It takes brute force and the paint peels off. Avoid this racking system. I have bought cheaper systems which were far easier to put together.
@bennyblancoyayaya3 жыл бұрын
Ah that’s how you do the ‘central supports’ thanks I was wondering where they went
@rachelsoens32123 жыл бұрын
Ditto! Been thinking I was doing something totally wrong because my tabs on the central support were not bent I just couldn't figure it out.
@ayuk-etangvaleryakere-mbi6604 Жыл бұрын
Pretty good.very helpful
@MerciiHeart3 жыл бұрын
Thank you so much for this video!!
@thismyytbhandle6 ай бұрын
I love people saying it didn't come with a mallet, mine didn't even bring instructions xD Thank you again for this vid, super useful.
@solb1017 ай бұрын
What is the thickness of steel on these shelves?
@safafituri253727 күн бұрын
Thaaaank you
@margithansen705810 ай бұрын
Tak from Denmark... I'll try again 😅
@davidevans5333 жыл бұрын
Cheers thanks
@SuperDeloi3 жыл бұрын
Hi, Can you adjust the height for this?
@brianawebster53462 жыл бұрын
That's for that
@walkerwang51744 жыл бұрын
Shelf L Rack Machine:kzbin.info/www/bejne/fabOmniuj7RsmJI