Shifting Straight Piped V8 Mack 2-Stick 6 speed ENDT-865 turbocharged V8 diesel 5 speed main box, 2 speed aux w/ reverse Pulling Carley dump trailer hauling Class B Rip-Rap
Пікірлер: 239
@albatross54662 жыл бұрын
I started working as a mechanic apprentice at Mack in 1978. The 864 & 865 had longevity issues but they were BEASTS. Great sound and a truckload (pun intended) of torque.
@boblackey1 Жыл бұрын
I remember hearing the V8 would break too soon on average. I worked in the ready mix business ( retired now) and we were mostly Mack for years. The few V8 tractors we had hauling stone in dump trailers could eat up a hill jack. Cummins and Detroit didn't have it like the Mack V8. But the longevity thing apparently was more likely than not so they faded from the highways. For 2, 3, 400 thousand miles if you drive one you were king of the hills with a heavy load. Man they had the torque!!!!
@rontrombley25965 ай бұрын
Our company had a 3 cab over V-8's with 5 speeds. I never got to drive them. They were always have problems with anti-freeze boil overs or leaks and it was real hard on wheel seals in the rear axles. Apparently the torque from the motor would literally twist the entire axle shaft under a load. They lasted about 2 years and then the boss got rid of them because of the constant repairs.
@DWLip4 жыл бұрын
Finally, a video showing an ENDT-865 being driven as one should be - with a six-speed and open pipes. God bless you for this upload.
@cidertom51404 жыл бұрын
D.W. Lip no 12 speed
@DWLip4 жыл бұрын
@@cidertom5140 It says right in the video description that it's a five speed with compound low, which is referred to as a six speed. Not only that, but do you see him splitting any gears? Lol
@cidertom51404 жыл бұрын
D.W. Lip you don’t have to on a flat bit only on hills dependent on load but I did notice other gear leavers too
@DieselFuelOnly4 жыл бұрын
@@cidertom5140 It's a 6 speed not a 12 speed. If you tried to shift it as a 12-speed it wouldn't work, the ratios overlap.
@jimmycannon80574 жыл бұрын
@@DieselFuelOnly that's true. Compound low for 1st gear only
@stephendryden89313 ай бұрын
old school Mack still have life love it very much❤
@davidharrell88903 жыл бұрын
When you get up in rpms, it sounds like a straight piped 7.3 powerstroke. Badass!👍👍🙌
@patrickbarker4120 Жыл бұрын
I was listening to this video without watching it and thought it was a 7.3 for a second lol
@fernandofigueroa2408 Жыл бұрын
It sounds like a Cummins 903 too
@russvoight11672 жыл бұрын
That sound brings back memories. Many of my customers were loyal Mack owners hauling logs & pulpwood in northern Wisconsin
@bikdav3 жыл бұрын
V8. That is a rare sound these days.
@theoriginalwunfeather91683 жыл бұрын
I drove a body job like this in the late 70's . Guys would laugh when they head me grabbing gears in reverse!! Thanks for the amazing talent you share!
@007outtacontrol Жыл бұрын
Thats sweet as shit. Shifting in reverse
@KC-sb2sm7 ай бұрын
Owned one for about 10 years, always thought it was missing but it wasn’t. Even pulled the heads off to see if there was a problem but nope. Loved that truck. Mine was 5 speed but shifted the same just no low range. Most dependable truck I ever owned.
@crazymixture574 жыл бұрын
Didn't even have to look into the description to know it was a Maxidyne...that gold paint and it's most orgasmicly pleasing sound to the ear can only be done by a Mack Maxidyne. Not to mention I love me my R700s (not the Western built RS ones but Eastern built ones from my home state of PA). I'd take that beauty over anything with a Jimmy in it or a Peterebuilt/Kenworthless.
@donnellykieranj4 жыл бұрын
If you love V8s check out some classic Scania 143's
@cidertom5140 Жыл бұрын
No such truck manufacturer as kenworthleds
@Orvz4752 жыл бұрын
Ah, the beautiful sound Mack ENDT-865 Maxedyne V8 engine.
@MrPeterbilt19714 жыл бұрын
Oh Hell YEAH !! 😃👍❤️❤️👍 Back when a Mack was all Mack. Not Renault motors or Vol-Mack.
@DMTruckSpotting3 жыл бұрын
Well, Mack did collaborate with Scania on a few engines.
@jonnothetrucker3 жыл бұрын
@@DMTruckSpotting including the v8
@DMTruckSpotting3 жыл бұрын
@@jonnothetrucker those were mainly the engines I was talking about.
@jonnothetrucker3 жыл бұрын
@@DMTruckSpotting copy that
@DMTruckSpotting3 жыл бұрын
@@jonnothetrucker honestly, if anyone had to purchase Mack & Renault, I wish it was Scania.
@surethatsok Жыл бұрын
You are the best operator I've seen on youtube.
@whitetiger86524 ай бұрын
One of my favorite videos. Thanks!!
@adriannettlefold90844 жыл бұрын
What an awesome video, well done on the gear jamming mate. Not one missed! The old girl sounded Great too.
@marcusw.5254 ай бұрын
Dammit!!! It sounds just like the old Scanias (142/143). They do share the same block but the rest is different. If i remember correctly Mack and Scania we're working together during that time. The E9 and DC16 are also the same block. Sadly the E9 was killed after Volvo found out they we're trying to revive it. Imagine if Mack still had a v8 in today's rigs.
@fernandofigueroa2408 Жыл бұрын
This is the grandpappy of the E9 engine. Awesome.
@ajmiller71024 жыл бұрын
That ole *8 really sound good.
@DieselFuelOnly4 жыл бұрын
Thanks. It's a unique sounding truck for sure.
@Autocar874 жыл бұрын
Very nice to see a guy shift so effortlessly. So many driving videos out there and most just jammin every gear and not even knowing it. Love the R-700’s. My dad had an 81 with a 300+ and the air shift version of that transmission. Great truck.
@avega27924 жыл бұрын
I really love shifting gears and listening to the turbo whistle.
@gilasquiggy78462 жыл бұрын
Great sound. Love that drivers side lawn chair.
@iBackshift4 жыл бұрын
wow...started up minty. 14 liter, kinda rare. Usually they are the 16 liter 998's. There is one sitting at "Jim Bob's hauling" in Geraldton ontario. Super good V-8 sound, great vidya there Bud ! ! !
@garyamerson7390 Жыл бұрын
Ol thumper sounds good.
@donaldoldaker5067 Жыл бұрын
I drove A. R 700 loved the sound. That ol girl sure could pull
@ncpcast4 жыл бұрын
Owned on of those R700 mack with 375HP V8 with 12sp and with straight pipes you never got of that sound
@gmanchurch Жыл бұрын
Back in the 80’s I worked for a company that rebuilt and repaired diesel fuel pumps, injectors, and turbo chargers. I worked on several of those Mack pumps and injectors. They were some well built and heavy duty pieces of equipment that were as tuff as they came!
@GravelPitt003 жыл бұрын
Need more videos of this Mack being driven..Great truck!!
@wolfiestechcafe10093 жыл бұрын
That sound is glorious...
@psd28 Жыл бұрын
Man these V8 diesels are pretty distinct
@dinosaurcomplaints23593 жыл бұрын
Gotta love the vent window flopping around!
@stefankassbohrer27653 жыл бұрын
Thumbs down ? Attention, a barking bulldog can also bite ... Great Mack !
@billyolday998 Жыл бұрын
Great to see a fellow r700 v8 6 speed still running down the road, im planning on straight piping my 865 here soon, glad to see videos of the original v8 macks instead of the flood of larger 440 amd 500 and e9s
@nyshortline4 жыл бұрын
Loving that V-8 rumble.
@jakesbackhoedozerservice70104 жыл бұрын
I love the side window flopping around 😂
@carlwilliams15702 жыл бұрын
Nice sounding “Thumpodyne”
@colinmckendrick98034 жыл бұрын
Sounds phenomenal, Mack ftw
@zabeemohamadi55474 жыл бұрын
Hello my friend, I watched your video from Iran and I sent for my buddy, because he already had a tractor trailer just like this
@rk-ec7kx9 ай бұрын
A very cool old truck 👍
@haroldharwell70782 жыл бұрын
We had one of them , it was a old GULF OIL truck, we bought it used & hauled tree length logs with it ... It was a runner.
@MichaelTJD604 жыл бұрын
Nice sounding Maxidyne V8. Don't see many of them running around anymore. Waiting to dump that load is like watching paint dry. lol.
@keithbrier43974 жыл бұрын
No left leg movement,low hole trans and a very good driver 👍 can't find many of them anymore.
@wesleycallison20794 жыл бұрын
I drove a six speed lo-hole with a 300 plus and a single stage Jake. Hauling corn. Fun!
@chriswilliams22953 жыл бұрын
I've always thought the American trucks especially the vintage of a R700 Mack has great character, given the chance if I ever visited the States I would love to have a go in driving a classic as in this video, just to hear such a gorgeous burble coming out of that V8, a Fantastic upload, great to see a Superb truck on the road doing a brilliant job :-D
@Clydes.Shop784 жыл бұрын
Man that thing sounds good!
@hoost30562 жыл бұрын
Took a ride in a Superliner with an E9.....700 horse, pulled a multiaxle pneumatic. Beast.
@rontrombley25965 ай бұрын
Learned to drive on a Mack 237 with a 5 speed, no power steering. The old adage: If you can drive a Mack 5 speed, you can drive anything still applied. In 36 years I went from 237's to super Sixes, 300+'s, 350's, 400's and 450's. All inline 6's with 10 and 13 speeds. My ultimate ride was a 300+ mated with a 5 speed and a 3 position air shifter and a hand shift creeper gear. That would go up the hills with ease. The transmission was perfect for travelling in the Hills of northern Pennsylvania. All spring suspension on a long wheelbase. It had a really good Bostrom air seat that made the ride livable. Mack stopped making the transmission because of the cost.
@phillipchavez7552 жыл бұрын
😁👍cool video, nice old work horse , good looking unit, dad had one just like it All green with a 26 ft frame Fruehauf dump late 70s models ,
@BlackSwan9124 жыл бұрын
Just beautiful.
@Sambrero444 жыл бұрын
sounds so good dude!! love it!
@fernandofigueroa24082 жыл бұрын
The ENDT 865,the grandpappy of the E9.
@tombergman54194 жыл бұрын
Had a 1971 r700 with the v8 maxidyne it was an awesome truck
@deborahchesser73753 жыл бұрын
How was it on overhauls? We could never keep them together, mostly ran 237’s and 300’s
@howardkettner2 жыл бұрын
So good. Love this episode!
@gravelpitt29924 жыл бұрын
Hey, great shifting that 2 stick Mack
@jimbenline63252 жыл бұрын
V8 Thumper sounds great !!
@macknit31254 жыл бұрын
Smooth operator👌
@robertbradford27344 жыл бұрын
This is a great truck I'd be honored to drive it we are in the same era not the fastest thing on the road but it'll pull a Hill... LOL
@daveshangar68204 жыл бұрын
I've driven a few r model Macks back in the 80s when I first started driving. They were great pulling trucks but they rode like a tank
@deborahchesser73753 жыл бұрын
Dave's Hangar they did beat ya senseless but they ran forever. We hauled coal off road a lot and nothing held up like a DM or R
@redline350zHR Жыл бұрын
Look up on KZbin here “10 speed mack” ( its a 10 wheeler oil truck) SOUNDS AMAZINGGG w/ a 10speed
@Tazfast74 жыл бұрын
Glad to see you are following your passion, few people get to do what they truly enjoy for a living. Keep grabin those gears man... you need a wookie bobble head on the dash ;)
@arguswil4 жыл бұрын
Great driver.
@pointingdog72352 жыл бұрын
I remember seeing an R 700 in Upstate NY in the 70's pulling a milk tanker.
@romelseepaul17614 жыл бұрын
Awesome truck
@whitetiger86522 жыл бұрын
Thanks for the video, 6 speed in my opinion was the best for Coal hauling which I did a lot of. 12 speed is second best.
@wazza33racer3 жыл бұрын
In mine, was a 16 speed spicer..............grossing 80,000kg she really barked! Getting from range 2 to 3, was always a precise operation ))
@lerg124 жыл бұрын
I love that sound, reminds me of my old 1995 F250 with the 7.3 Powerstroke when i straight piped it. Boy do I miss that thing. But really nice looking old bulldog, What year is it?
@Super06duramax4 жыл бұрын
Nice drivin
@efrainberrios84944 жыл бұрын
Me gustó mucho tu video y la manera que conduces este Mack V-8! Me suscribí a su Canal para seguir viendo sus videos. Dios te bendiga.
@marciooliveira79213 жыл бұрын
The real truck,yes,sir!!!😎😎
@michaelreynolds37984 жыл бұрын
Wow it started I'm impressed
@1986Honda4trax4 жыл бұрын
Michael Reynolds why?
@jamescampbell77804 жыл бұрын
A beauty!
@herbscheit20615 ай бұрын
Thhey might not have pulled or lasted like an e9 but still sound great and that one is a nice unit!
@farmallchris4 жыл бұрын
That’s perfect
@nicom49964 жыл бұрын
Wow that sound
@oscarr.camacho72573 жыл бұрын
V8 Truck World's Best Sound
@kurtd41914 жыл бұрын
Sound great rough going up hill specially the straight 7. Obviously the engineered never drove it up the Allentown hill
@billygreenhorn92754 жыл бұрын
Sounds like my 409 Impala...you're gonna lose your vent window anytime now
@deborahchesser73753 жыл бұрын
billy greenhorn ol she’s hanging by a thread
@Ally.Cat.2522 жыл бұрын
That door window is about ready to fall out
@jeffersonmoctezuma37334 жыл бұрын
Nice shifting btw I recognize that building at 3:52 u in Pittsboro NC by that roundabout
@DieselFuelOnly4 жыл бұрын
Yep that's it!
@allanhickeyjr78643 жыл бұрын
Think they still build the V8 Mack but only for sale in Australia (road trains).
@gabenieto31134 жыл бұрын
if you ever want to sell the truck i callfirst dibs! great sounding v8
@1986Honda4trax4 жыл бұрын
I call second lol
@dennyalfro98326 ай бұрын
Can you make a video where you use the clutch every time you shift gears?…
@joshjones340810 күн бұрын
Dam over the top ....do you like to arm wrestling 👍👍look like it in the thumb nail
@gc11724 жыл бұрын
As Macks go this isn't that old as it is a Maxidyne with a triple countershaft five speed T107 transmission. I drove the older Thermodyne series with a 72 series transmission with two shaft so it had move double stick shifting. Drove that back in the later 60's before college and after college worked as an engineer in the Mack Powertrain plant building the Maxidyne and related geared products.
@alanbaker76774 жыл бұрын
Yes its not that old i drove an old mack with the twin stick 6spd hauling crushed stone out of the quarry for quite a few years
@SchnelleKat4 жыл бұрын
Because you said it's a pretty rare motor does that also mean Parts are not readily available for it, Though Mack or Websites... And/Or Do MACK even still support parts for this engine? I've always been a fan of these but my true love is for the Mack DM models... I would love one with a Detroit & Steel Dash. P.s Sounds like a Predecessor to the E9!
@DMTruckSpotting3 жыл бұрын
Would that be an R795LST or R795ST?
@jarrodwemhoff72702 жыл бұрын
I miss that transmission.
@jacobrobert17653 жыл бұрын
in my country when a person has a mack truck he makes a lot of money with him
@deborahchesser73753 жыл бұрын
Jacob Robert they are world famous and my favorite truck of all time.
@jacobrobert17653 жыл бұрын
@@deborahchesser7375 me too it is my adorable truck but it is the seesaw of which I was trafficker
@jacobrobert17653 жыл бұрын
@@deborahchesser7375 nd you are very top brotha gud job
@nerradnosnhoj51222 жыл бұрын
Cool Truck , buddy , you are going to loose the vent window ....
@BuRn1NgAnUs Жыл бұрын
Could you fit that engine in a R600?
@David-wu7jj4 жыл бұрын
Very nice video better done than the boston trucker
@lewiemcneely91434 жыл бұрын
There was one of these V8's at the boulder hole in a DM 800 rock truck and till 'driver' let the oil get low and it spun a bearing. SWEET engine till then.
@1986Honda4trax4 жыл бұрын
I thought rocky was driving from that thumbnail
@charleslambiase56703 жыл бұрын
That unimitable sound...
@redline350zHR Жыл бұрын
Yesss 🔥🔥🔥
@carolinawestern38752 жыл бұрын
Thing is though, by owning 2 of my own trucks. I always used the clutch because they're cheaper to replace than trannys when you're paying the bill. If used right you can't hurt em. After years of floating, they whine, howl, jump out of gear and with damaged synchro's. They'll no longer shift correctly even if you tried. Saw guys use bungee cords to hold em high gear.
@dalewesley16624 жыл бұрын
Now your in trouble got known 3408 in that machine 🦉🦉🦉🦉 barred from Osoyoos BC chow baby.
@jacobrobert17653 жыл бұрын
I love camion mack
@carlwilliams83544 жыл бұрын
Drove one in a U model with a 10 speed as an off-road spotting truck on a logging job. Sounded good but not stronger than a good running 300.
@lewiemcneely91434 жыл бұрын
300's and the Plusses could be REALLY strong.
@leslymora92822 жыл бұрын
Anyone have torque specs and sequence for the head bolts on this motor? Just picked up one of these trucks and can’t find any manuals or service information
@josepenate73674 жыл бұрын
Cool
@howardiknow11334 жыл бұрын
A tune you can change gears by...listenshifter 😁
@kman-mi7su3 жыл бұрын
What is the rear end ratio on that truck? Probably a big reason why she's slow
@charleslambiase5670 Жыл бұрын
I've built the models I'm driven them,, I've even worked on them but I never and cannot believe in all my life have ever seen a true V8 Mack ,,,what is the power feel between the V8 and be in line 6 with your preference , what is the advantage of the V8 yes of course cubic inches V8 but the action drive and work with them you would know better just give me an insight thank you