shimano stradic service

In this video I show you how to disassemble a shimano stradic 3000 FI. This also shows you how to disassemble any stradic FI, as they are all relatively the same. I also show you how to re-assemble the reel after it has been completely taken apart. If you have any questions contact me at SRQ Fishing Oasis at [phone] or come by and see me and I'll help you any way I can. You can also just drop your reels off with me and I'll service them for you at the best price around. Service of reels normally takes between 1 and 3 days and all spinning reels cost $14 for service, baitcasters and conventional reels below size 4/0 are also $14, 4/0 and larger are $20.

[@charlesscott3729]

*Great reel, **enjoyable.fishing** recommend very smooth and I love that you can change from left hand to right hand so easily. Gave it a 4 on durability because I haven’t had it long enough to rate it. Doing good so far.*

[@braveswin1]

Thanks for posting this. Helped me a lot and got my Stradic 2000 back in action.

[@headoffatness]

thanks for posting! went for a surf with my stradic. all sorted now.

[@danielsonsthagen8970]

Took my brand new Battle II 5000 for a spin yesterday for the very first time and I hooked a 20lb yellowtail using a Ugly Stik X2 (medium hard) rod kzbin.infoUgkxM68VkfsQhHaabDce1IwOCXuvumcpbZ_k . This combo was recommended on some website and it did not disappoint me. The reel is smooth, the drag click is pretty cool cause i think it adds to the excitement of fighting the fish, personally the drag is my favorite part. I use braid and 300 yards will fill the entire spool. This combo is my main setup from now on although I have to disclose I am new to fishing.

[@leshurt9590]

Great vidio mate. Aussie Charlie. I'll attack the 2500 stradic tomorrow.

[@axs017]

thanks a lot man i just used a stradic ci4 in the surf and it sounds horrible and i watched this and now it works like a charm

[@DroneSurf]

Thank You very much for this video !!!!!! I Just fix my Stradic CI4 2500 FA with this video. Thanks again.

[@arloburgos8439]

great video. thanks for this. you make it look easy.

[@lilladokka]

*It's a Penn so the quality is there. I really like the 2500 for speckled trout fishing **allabout.wiki/01fs** I throw jig bait with 10 lb mono. I like the 2500 for this better then the 2000. Glad they added this size to the line up*

[@mywalkingfriend]

simple, clear and quick. thank you

[@TomNavesink]

Great video, tho I'd recommend laying out parts in orderly manner as you disassemble

[@S14aDC]

Great vid, thanks for posting.

[@namvanbui]

Awesome video!

[@Lukewarm39052]

I also have the bail spring problem please help!

[@mripodhelpr]

Very very helpful video...I just wish I had watched it first

[@TheLeykis101]

Sweet. thanks very much for this vid.

[@randomshawny2045]

It would be helpful to show of alternative oil and the type pinion gear grease and how much to use at the specific location.

[@rudylightell6165]

Can you please show how to replace bail spring on the stradic 3000 FI

[@trungthuan9898]

Thak

[@stevewill3572]

cool focus

[@ikester2003]

Can you show how to reassemble bail spring? Mine popped off and I can't figure it out . Thanks!

[@ElBote54]

Nice!

[@johnchungmintat8716]

Hi chris i am having abit of a problem i accidently pull the bail assembly out of the reel and i cant put it back on properly

[@nvietmonkey]

After reassembling my reel I hear a scratchy noise and I think its from the drive gear. You know what part I could possibly messed up on?

[@jcmoye1]

Great video! For cleaning purposes, is it necessary to take that much apart? It’s works fine, can I just spray it down with cleaner?

[@NasalObstruction]

how bout a video concerning regreasing,type of grease.how to apply ,,u know specifics..

[@nemo5335]

I use Superlube synthetic grease and apply it with the cheap acid brushes from the plumbing section at the hardware store. Works great, might even be overkill.

[@danwaller5312]

Can you show how to reassemble the bail on the spring side?

[@huh31987]

Yeah, do you know the Allen Key size for the lock screw on the Stradic Ci4+? The schematics are not very helpful on that aspect. It's abnormally small.

[@truckboattruck328]

0.9 for the allen screw

[@conorpeachey5315]

i have the same as yours just the 5000 model and its really stiff when u wind it do you have any ideas o how i can fix it

[@weishuntian9937]

can you or someone show us Shimano baitrunner spinning reel 6500 'maintenance please... and thanks!

[@huh31987]

My Stradic got soak the other day. I did all the basic preventative maintenance. Today it sounds a little rough. Is there A way to get to the gears inside without taking off the reverse bearing and all those parts?

[@srqfishingoasis]

No, you can't get the gears out with out taking those parts out. The reel needs to be completely taken apart and serviced.

[@tommymejia8244]

I have a Shimano Spheros 4000FA, (discontinued model). Do you work on those as well?

[@BrianS_Twin2]

How showing how to take apart the bell too?

[@sebastianfedorowicz7836]

Hello SRQ. I would like to ask you what would be better for Penn reels gearing. Penn blue grease or Super Lube Grease. I just want to know your opinion.

[@ruben6700]

Great video. I'm looking for a used replacement handle for my 4000fi. If anyone has one for sale pleaaaase let me know. Those suckers are hard to find. Thnx

[@MrOnegesius]

First - Thank you for a very informative video. One complaint - Please check your focus point next time! It is set at the front where you are putting objects down and you are doing all your work about 3-5 inches behind the focus point. It is difficult to see what you are doing and it is really playing with my mind as I try to focus on what you are doing. I think a video on the bail spring (as others have requested) would be a good idea.

[@gmonkman]

+MrOnegesius Fair point

[@dougnoble9931]

miss my fi

[@nygardenguru]

Likee very nice

[@cammoman45]

For anyone that might be able to help me please comment. I have an old pole from the 50's, maybe early 60's.The only making it has on it is on the backside above the reel grip and it says phantom bantam. I just want to know more about it because it belonged to my grandfather. Any info is appreciated, thanks.

[@DB-xc3jc]

You must mean rod, your the old Pole!

[@NorthsideChamps16]

Never use pliers on a brass nut.

[@hungaryorion]

Bad camera use :(! Wrong focus point!

[@rabbitskinner]

Any idiot can take a reel apart let's see it cleaned and reassemble

[@edwardnunn970]

Pretty much worthless. Most