Shimming the pardnv008lrf

Just a short video to hopefully help you out a bit. I'm no expert but it's how I did mine to keep the cross hairs central on the screen
Link to russ Douglas,
/ russdouglas222
My local gun shop has many rails and adapters in stock and a fantastic range of air rifles pellets and accessories
www.pullthetri...

[@shaunwilson4796]

Gday mate I had trouble with mine I rang the experts that I got it from and they said it was normal I have it on a 222 shooting out to 200 at night so I wanted it perfect I just spent an hour shimming it with a bit off a beer can Now it’s perfect Thanks from Australia Good on ya

[@kevinhamment5265]

I asked you about the Pard on a springa, thank you for your response, it actually was Russ that mentioned you already used 1 on a HW97 so you can blame or credit him for our previous communication. From me, thank you both for taking time to respond to my inquiry. Best wishes lads Kev Australia

[@Wolverineverminshooting]

👌

[@heleti0000]

Thanks so much. Looking at getting a Pard and this video has made set-up things very clear (potentially saving me a lot of trial and error) Cheers 👍

[@davidr4310]

thanks for this video, my 008 is due to be delivered tomorow, this explanes the shimming so everyone can understand, 👍

[@sgrunt2144]

Well done on the explanation. Fine job Looks like you covered all the bases !

[@Wolverineverminshooting]

Thank you, was just a brief one👍

[@casperboo5465]

Great video mate and very informative, Thank You, Cheers

[@endofdayz783]

Year old video but thanks for uploading it as im having issues with the x axis the machining is not great on this clamp with the pard ..👍

[@michaelslater4841]

Great video mate very helpful

[@donaldmarks8707]

Very useful info mate. Thanks for posting. :-)

[@Wolverineverminshooting]

It's only really a insight but hopefully help a little bit

[@theexcorcist1]

Great Eagle vision mounts only problem is they do NOT fit the 008s lrf

[@F74D3N8r0T]

Well done explanation. Thank you mate! What kind of front clip are you using at yours? Is it a part available to buy somewhere? Or may it be a 3d printed part?

[@Wolverineverminshooting]

What do you mean by front clip

[@F74D3N8r0T]

@@Wolverineverminshooting I was talking about this grey lens cover

[@Wolverineverminshooting]

@F74D3N8r0T available on ebay. Just type pard lens cover for the model you have

[@lloydsummerson4694]

Good info m8. Am getting a pard nv008lrf 2day and comes with weaver rail. Its goin on a bsa ultra se. Any idea if it will need shimming?

[@Wolverineverminshooting]

They all need shimming

[@newheat64]

hi mate i just bought the adjustable mount from custom rifle scopes first class bit of kit, i zeroed the gun on the mount alone then fine tuned the scope. hell of a lot easier, just my thoughts but thanks for the info

[@Wolverineverminshooting]

Nice one👍

[@Guide504]

Dipped into the low end kit for foxing. The unit is ok, but had to build my own mount.....its a joke.

[@matthewstephens6848]

So, front bolt shimmed = pull crosshair left and back = right?

[@1442GlennLane]

Hi, I've managed to zero my pard adding four shims at the back. However, the crosshairs are now bottom right of screen. To bring them up, do I add more shims? Also, in the box came a small aluminium block with a tiny screw in the centre. Any ideas where it fits and what it's for? Thanks.

[@Wolverineverminshooting]

You need to shim a bit more. The little metal thing is if you are putting it on a picatinny rail

[@1442GlennLane]

@@Wolverineverminshooting Many thanks.

[@pistolpete938]

I'd just like to know what you used to shim your pard.iv just recently started to push my distances out to 50 yds max and I'm getting pellet cross over.my wildcat has a proper factory rail, so I'm suspecting the shimming!

[@Wolverineverminshooting]

Has your gun got a weaver rail or dovetail

[@mistyblue2332]

I have a HW100 And I have just purchased the pard 008 LRF I have noticed the pard sits to the left slightly ...what size adaptors do I need for my HW 100 so the pard sits more central to the barrel.

[@Wolverineverminshooting]

Look at the video at 5.30 you can see the adapters

[@garethjones3412]

Zeroing block from drews lab Glasgow

[@regsparkes6507]

I have ooften thought that Air Rifle manufacturers should get rid of these 11 millimetre dovetail rail 's and switch over to the picatinny or weaver types. Am I correct in this thinking? I ask because, quite obviously, you have far more experience in shooting PCP rifle than I could ever hope to have.

[@Wolverineverminshooting]

Unfortunately most rifles come with the dovetail

[@regsparkes6507]

@@Wolverineverminshooting Yes, precisely my point, I guess! There would be none of the 'scope sliding' issues with the Picatinny rail, and scopes and or 'dot sights' would stay put much more firmly too.

[@Wolverineverminshooting]

@@regsparkes6507 I've never had any problems with scopes moving on any rifles, whether it's been on a 22.250 or a Springer. I've never owned or even seen a rifle with a weaver rail. I see your point though. More surface area will give more grip

[@regsparkes6507]

@@Wolverineverminshooting OK then!!

[@Wolverineverminshooting]

@@regsparkes6507 I think I need to do a bit of googling 😁👍

[@davidhughes4020]

Hi I have just got my pard 008 and am at a loss at to the shimming did you find the link for the unit on eBay for elevation please Cheers David Hughes

[@Wolverineverminshooting]

Scroll down my site, I did a video on how to do it

[@Wolverineverminshooting]

Sorry brain in neutral. You only need to shim back

[@theyorkshiremagneteers6590]

Title is shimming but shown no shimming 🤦‍♂️ Just had it already installed throughout the video 🤷‍♂️

[@Wolverineverminshooting]

It's just telling you how to do it, its very easy

[@theyorkshiremagneteers6590]

@@Wolverineverminshooting Yeah, on several Facebook groups and searched Google and KZbin too, and they are all basically the same that I've found so far. Saying it needs shimming and why and the benefits etc, much like yours. I'm not knocking it, I was just hoping to see it actually being done. Showing where the shims actually went as they are pretty hard to see an one that's already set up. Also got my coke can strips ready cut for the left/right shimming but no knowing wheres best place to put them 😔 Seen a few videos similar to yours and the comments are similar to mine on yours that they not showing the shimming process being done 😞

[@Wolverineverminshooting]

I explained where to put them, put a couple of strips of can at the back just inside the screw and that will lift the back up. To shim left or right a bit of can on the front or back part of the mount. I didn't bother with left or right just elevation

[@theyorkshiremagneteers6590]

Thanks, I'll give it a go this afternoon at the range. Only got it yesterday so trying to gather all the info I can before I start. Just subscribed too 👍

[@Wolverineverminshooting]

Message me if you get stuck👍👍

[@blackbeard1074]

Hi i got the same trouble crosshairs very low on screen espescially when on zoom what and how did you shim it with m8.

[@Wolverineverminshooting]

I used a bit of cable tie. If your cross hairs are low it needs shimming a bit more at the back

[@joshturner9766]

hi wolverine mate, a question if i can cause im struggling?? i got a pard008 tightly secured to a brand new puncher breaker, kral 177 but the problem is some nights the zeroing is completley different! for all my pellets, so when i pick it up to take a shot i end up missing and then go to zero next morning and see its shifted huge too the left or right

[@joshturner9766]

just to clarify i mean both my pellet brands (hades or exact heavys) on both pard zero settings "a" and "b" are both way off by like 5-6 mill dots to left or right

[@Wolverineverminshooting]

Are you saving the settings

[@joshturner9766]

@@Wolverineverminshooting yes mate i have rat control videos on my channel each kill is a different night

[@joshturner9766]

this is first time its happened, now my left right axis is like -120 lol

[@Wolverineverminshooting]

The mount could be moving, don't over tighten the pard mount or it will snap. You will have to use a locator pin between the pard and the gun to stop it moving

[@grahamseymour3909]

How did you remove the rubber eye piece was it glued?

[@Wolverineverminshooting]

Yes it was glued but came off without wrecking it

[@johnp6541]

that grey stuff on the front lens is a iris ? whats your experience with it,is it working for you?Thank You, cheers

[@Wolverineverminshooting]

Its just a sun shade but makes it easier to focus

[@ejkb9655]

Hi, good video. Did you 3D print the sun shade or did you buy? So difficult to focus.

[@Wolverineverminshooting]

It came with the pard nv008lrf

[@ejkb9655]

@@Wolverineverminshooting Ok. I didn't get any shade.... I just got my nv008lrf last week.

[@Wolverineverminshooting]

@@ejkb9655 I do believe you can get them on Ebay

[@michaelbrown17]

5:08 the variable dove tail to weaver mount. Does anyone know who makes/supplies these?

[@Wolverineverminshooting]

The item number is in the description

[@michaelbrown17]

What description where?

[@RussDouglas222]

@@michaelbrown17 That's the "ZB Lite Pro adjustable mount", I was going to paste in a link to the customriflescopes.com shop, but they're now closed till January for holidays, Blackwood Outdoors doesn't have it listed either. Sorry bud. Russ

[@pistolpete938]

Weaver rail it's factory fitted

[@Wolverineverminshooting]

You shouldn't get cross over unless you fit the pard straight on to a dovetail without the 2 adapters. Without the adapters it sits around 5mm to one side, so once you go past your zero it will start shooting to one side. Shouldn't have any problems putting it straight on to a weaver rail

[@anisbenrhouma9339]

Zero at all distances how so

[@Wolverineverminshooting]

How do you mean 🤔

[@RussDouglas222]

With either the PARD008 or PARD008LRF the latest firmware is v1.25, which gives you five zero profiles & five reticle options, so you can have five different zeroes saved for different ranges, pellets, or power levels. Cheers. Russ

[@pistolpete938]

I think it's the shimming, IV taken the pard off the gun and replaced it . now to zero it at 20yds and try again.thats all it can be!

[@Wolverineverminshooting]

Worth a try👍