Shiney New Brakes and Half Shafts! and I met Leroy the Savage! - LSxHumvee

[@Joshtheman99]

Much appreciated! Stationed out in Korea and this was a good watch 👍🏼

[@dachampguam5784]

Great videos, keep up the good work on the Humvee and the videos. You're gonna help me keep my Humvee running good. Thanx for the great details on the "how to videos".

[@jackreacher7029]

I think it's safe to say you really know your stuff man. Good job.

[@gjermundification]

3:31 on the Hummer H1 I used 61mm wrench to screw the cylinder back into its place.

[@AllThingsRamdom]

When I change brake pads I typically use a C-clamp to compress the Pistons back. That's a neat tool your using!

[@AllThingsRamdom]

Nice, thanks for sharing!

[@christianpray2432]

Keep em coming

[@m998hmmwv7]

Awesome vid.. Thanks bro. Now do the rear brakes ☺

[@gjermundification]

3:54 Not sure how the rear is different; at least not on the H1, 5:51 I unscrewed the half shafts first then the rotor came out, while pushing the half shaft all the way up, I unscrewed the top part of the caliper; and out came everything. I used a ratchet ring spanner however, not the pipe. 13:40 I used alu-paste where you use locktite.

[@gjermundification]

2:38 two bolts as far apart as possible; right across from each other would be nice.

[@Cucuy_HMMWV]

Do you recommend to buy OEM breaks and rotors? Or just from a local part store

[@gonzo8054]

Currently doing this on a m1123 hmmwv. ..

[@LSXHumvee]

Let me know if you need help!

[@hummerguy]

How did it go? I'm doing an M1123, the different with ours is the front winch bumper, my rotor is stuck between the frame and bumper on my driver side.

[@gjermundification]

16:55 Start of rear end

[@bearmeister98]

Hey haus, love the videos! Question though. I watched you install lift rings on ur truck, did you or are you having issues with wear on the suspension or other components? I'm wondering about the geometry change. Rubber Duck 4x4 has a kit with ball joints but they don't state whether the ball joints are to overcome the geometry change or they are "just in case"...? Thanks again!

[@LSXHumvee]

Everything has been fine so far.

[@mattdesruisseau82]

Where did you get the rotors from?

[@LSXHumvee]

Advance Auto Parts

[@lt9690]

Did u go with the stock brakes or the any kind of upgrade?

[@LSXHumvee]

Just the stock brakes.

[@lt9690]

@@LSXHumvee thanks. Just did mine. About to replace Pittman arm.... the joys of restomod...