DJI MiNi 4 Pro 500m Altitude limit unlock | 120m Max altitude Dronehacks

[@gloup81]

can't you change the parameter "g_config.flying_limit.user_set_max_height [value:500] to 1000 and then set the max height to 1000? Do you think this will work with european locked mini 4 pro's?

[@nikolasvrionis4977]

by doing that you can lose your warranty?

[@chankey11]

I tried everything you said but still it is not able to detect my mini4 pro. anything else i am missing? need help

[@samirvieira3047]

There is no option to buy license for Mini 4 pro on DH website?

[@DigiDriftZone]

It seems Mini 4 Pro is available now? - I haven't tried it yet, but very tempted!

[@jansfilm]

Not work with firmware 01.00.0300, area UE

[@robertsailo1072]

Hi Shiv. Will this hack still be applicable if I update my DJI RC 2 Firmware to V02.00.0100? Also will this hack still work if there are further updates to the Mini 4 Pro in the future? Or in other words, is this hack application to a certain level of Version? if so upto which version is it supported?

[@By.ozalsa]

Yes

[@krzysztofmierzejewski]

Unfortunately, this method does not unlock the maximum height. The changes made are ignored by the drone and it still does not fly higher than 120 meters. DJI MINI 4 pro

[@DigiDriftZone]

Did you find a solution to this?

[@NoName-hc6ox]

He is best hacker 😂 He hack nothing if you wonder. Your DJI Mini 4 Pro has it already. You can just move your button on the remote to S then go for settings and swipe to 500m. No need any apps. Please be smart and don't follow any crazy ideas here. Make sure that your country and place where you plan to operate your dron is not restricted about max height of drones flight. Thank you for attention 😂

[@SBoOoStEd]

In Europe, drones are limited to 120 m, and you cannot just "swipe it" to 500 m. Please do your research before lecturing others. "Thank you for attention"

[@gsiomos]

Yes it does not work! Here in Eu are locked at 120m. I run the app and when i upload the settings nothig happens

[@gsiomos]

@@NoName-hc6ox I did this but nothing also happeed!

[@Townshed55]

Which license do you buy? Mini 4 Pro isn't listed yet?

[@Shivkumarsd]

Don’t buy the license, you can use drone hacks free desktop application to unlock 120m

[@DrMrSam]

Anyone know if you'll get the 'Declassification Prompt' in Ireland? As its an EU country and abides by the EASA. So I assume it'll work there?

[@emmanuelgerardo5813]

Soy mexico compre el dji mini 4 pro y salio que el limite es 500 pero he visto que puede alcanzar mas de 3000mts como lo desbloqueo?

[@RobertoD91]

is this hack still valid for last firmware in europe?

[@VuTv-qd5kr]

hi shiv , i have dji mini 2 with litchi pro app, yet not able to fly beyond 150 m altitude , in litchi app it shows 500 m .. help madi sir!!

[@robertobarina5781]

Hello and congratulations for the video. A very simple question (perhaps with an obvious answer): after having carried out the procedure to bring the maximum height limit from 120 to 500 metres, is it possible to do the reverse procedure: that is, bring the maximum height limit back to 120 metres? Thanks a lot for the answer

[@moricz_mate]

Ofc, you need to do the same process, only, at the end instead of 500 you write 120 meters and it’s done.

[@valinicoara7216]

Hallo Is the procedure also valid for Europe??

[@Shivkumarsd]

Yes the procedure is valid for Europe as well

[@valinicoara7216]

Thanks for the reply. I want some advice from you please I have a DJI mini 4 Pro, for which I did not update the software precisely for this height limit of 120 m. In Europa. I bought it 2 months ago and the height limit is 500 m What to do ?? Should I update and use this hack or not update and continue to use the C0 class ace that is on the drone?? Thank you very muc

[@PhilippeOrlando]

wow, so in India you can just fly like this over a city, uh?

[@VICTORTRADE-mw9sb]

Dji 30 waat charger is good for dji mini 4 pro? Or try another charger

[@capitancairlblandford5785]

How can we remove the No fly zone from the DJI mini 4 Pro...

[@lesiunek]

license option for mini 4 pro disappeared ?

[@OfficialRedTrycs]

I am 100% sure you can get more than 1m subs for making good drone videos

[@Shivkumarsd]

Hope so we cross 20k subs soon!

[@supergaru64]

hi, thanks for the video tutorials and the info...I would like to know if there is a software for the DJI RC N2 parameters...thanks

[@karanyi81]

is it still possible to hack, if the Mini 4 Pro has the 01.00.0040 fw version?

[@orxion]

what about NFZ limits?

[@pchatterjee2]

Should i update flysafe data? Thanks i have reached 500 meter

[@Shivkumarsd]

Yes you can upgrade fly safe. But don’t upgrade the firmware’s

[@pchatterjee2]

I have upgraded firmwire to latest version, as per your video..and 500 meter is still there, but where from i had bought it, they asked not to update flysafe data, thats why i had asked

[@sekainiheiwa3650]

how about MAC ? I have not use windows since 95

[@Shivkumarsd]

Mac does not support drone hacks

[@darkmoon8683]

if you fly red zone then what will happen ? is there any tracing mechanism in India? I can see lots of people are flying at red zone

[@Shivkumarsd]

We cannot fly our drone in red zone. The drone won’t take off in the red zones

[@darkmoon8683]

@@Shivkumarsd Its take off. I have seen so many people are flying at red zones

[@shahzebkhan6649]

they have to give there number and name for authentication wnd they will take permission that your are eligible and responsible for flying

[@tejassingh7606]

I am not able to connect my drone.. The green solid bar is not showing..

[@manojreddy1264]

Bro any hack on fcc for mini 4 pro . As the rc signal is limited in uk

[@Shivkumarsd]

I tested FCC booster bro, which did not work on DJI mini 4 pro. I did not see any difference in range. Anyways I'm testing some other Hack, I will update you once i find anything.

[@bhavyakamboj]

Thanks bro. it worked in first time :)

[@Shivkumarsd]

Good to know! Please subscribe to the channel for more such drone tips

[@The100875]

Hi. Drone hack application does not detect DJI mini 4 pro, even with DJI Assistant 2 (customer drone series). "Hack parameter" option doesn't get activated. M using original cable, which was provided with the drone. Please advise, how to connect. One more thing. altitude limit in my drone shows 35 meters (not even 120 meters). I have no clue, how 120 mtr limit got changed to 35 mtr?

[@yoshy2628]

Then your fly area is in a restricted area, like airport or airbase. You can check it online if your area is restricted or not. I live near by airport, my flight altitude is also restricted at 35m.

[@Imhim95762]

Could you change it to 1000 meters?

[@airidiukas]

How about warianty, if i do 500m?

[@mehulsolanki4526]

Sir nice video, could you please guide whether the new RC of DJI Mini 4 Pro Supports Installation of 3rd Party Application please reply

[@Shivkumarsd]

DJI RC N2 won’t support installing 3rd party applications.

[@Greek-Pilot]

После перезагрузки дрона параметр сохраняется?

[@Shivkumarsd]

Yes this setting stays on your drone even after rebooting the drone.

[@PriyanshuKhabia99]

where to buy?

[@deepakcoolm]

The latest version of dji mini 4 pro manufactured in 2024 supports 500m height by default 😊

[@ElleEsseElle]

Not ti europe, C0 drones 120 max altitude.....

[@dejotstudio]

They go back to 120m restruction from January 2025. Actualy all new CO's have the restriction already...

[@caliman777]

Is there anything for remote id

[@By.ozalsa]

Worked perfectly. Thank you bro

[@Shivkumarsd]

♥️👍

[@akashdharod8138]

Not working. Unable to detect drone. Tried multiple attempts. Software is unable to detect. Please help

[@dimg3175]

have they released a hack for the mini 4 pro?

[@Shivkumarsd]

Yes

[@dimg3175]

have they released a hack for the mini 4 pro? does this break the c0 to go up to 500 meters or does it go beyond 500? because on the dronehack website I don't see that they have released a hack for the 4 pro

[@cogotexx]

‘Knowledge is power’ they used to say 😅 The have a few questions my friend. This data correction is stored in the drone or in the controller? (I guess you could have 2 controllers and use “the one” for “emergencies”). And lastly; the software screen showed a login and password in place…you have to open an account with them?. Hope you can see this 🙏🏼 Many thanks

[@OfficialRedTrycs]

I think u will achieve 14k subs by tomorrow 🎉

[@Shivkumarsd]

Thanks for your consistent support ❤️😍

[@VICTORTRADE-mw9sb]

It is good to buy DJI mini 4 pro for weeding

[@Shivkumarsd]

Yes absolutely DJI mini 4 pro video quality is too good. You can use it for wedding shoots

[@VICTORTRADE-mw9sb]

❤

[@pradipmangarule7331]

Where to buy this drone

[@Shivkumarsd]

Which city are you from??

[@pradipmangarule7331]

@@Shivkumarsd Maharashtra pune

[@KithapathiCom]

138k in Bangalore sealed box

[@rahulagrawal2741]

done successfully.. thanks a lot buddy.. one doubt ..is it safe to revert back ?

[@Shivkumarsd]

Yes 100%

[@francescobasso4611]

Which licence did you buy? I can't see anything for mini 4 pro on the site, only up to mini 3 pro

[@rahulagrawal2741]

please watch the video again .. its a hack and not a Licence@@francescobasso4611

[@Peter_Karak]

It doesnt work now. The aplication doesnt find dron.

[@propanel]

Please help for altitude limit unlock in new firmware version (v01.00.0300 )

[@AlexMarkovViewFromAbove]

Did not work with last FW :(

[@Sigy497]

it doesn't work in Croatia on 4 pro

[@ashishcalicut]

Useful Video I recommend Connect Rc with Drone While Writing the update...Thank you

[@TheElpocho94]

Funziona in Italia ?

[@ЖабраилМовтаев]

А может она лететь вверх больше 500м? Если можно можешь показать пожалуйста на сколько Я подписан на тебя и покажи как надо я слышал про круиз контроль наверное с ним можно

[@DigiDriftZone]

Does this still work in Feb 2024? - a few comments suggests it does not work? - maybe this is only outside of the EU?

[@GetElectricGR]

Probably won't work if you updated to firmware 1.00.0300. If you have 1.00.0200 it should work, probably.

[@DigiDriftZone]

@@GetElectricGR I checked this today, I'm on the latest firmware and it allows manually dragging the altitude limit to 500m, it defaults to 120m though and shows a warning when trying to exceed that (but doesn't stop you).

[@GetElectricGR]

@@DigiDriftZone are you sure? I tried it with the latest firmware and it allows 500m indoors but as soon as the drone gets GPS, it reverts to 120m max. What firmware do you have in the drone and in the remote controller? And which remote controller?

[@DigiDriftZone]

@@GetElectricGR Just checked again, yes, it is not locked, just shows a warning the moment you go above that altitude, warning disappears when you return to 120m. Aircraft: 01.00.0300 - RC: 01.01.0200 (I'm using the RC N2 without a screen) - when I click check update, it says latest firmware. This is in the UK, outdoors with GPS.

[@GetElectricGR]

@@DigiDriftZone oh, maybe it's because you are in the UK! I have the same Drone FW but I have the RC2 controller, that's another possibility. Anyway, I think I'm gonna reclassify as C1 and be done with it. Thanks for checking!

[@9300512428]

You didn't talk about license email id and password which we can see in the video.

[@firozmnshi]

Very well explained. I did struggle in getting my new 4 pro detected by drone-hack application, but after couple of tries it did detect and rest was as smooth as butter. Thanks indeed. Keep up the good work 👏

[@Shivkumarsd]

Glad it helped!

[@streamerguy1970]

And it didnt work like the rest of is found out lol

[@FERMAIGAMERS]

Make a video on pd charger above 33 watts

[@Shivkumarsd]

Sure, I will soon make a video on it.

[@FERMAIGAMERS]

@@Shivkumarsd make It a bit quick Can i use my 120w pd charger

[@rushikesh9824]

RC N2 is available?

[@Shivkumarsd]

Yes

[@propanel]

With latest firmware (v01.00.0300 for the drone firmware and v02.00.0300 for the DJI RC 2), it does not work...

[@krzysztofmierzejewski]

Not work with latest firmware v01.00.0300 and v02.00.0300.

[@FERMAIGAMERS]

Bro make a video on charger

[@Shivkumarsd]

Bro, it’s here : kzbin.info/www/bejne/gH6vh5asp9llkNE

[@jpaiscarvalho]

hack didnt work for me!! Followed all steps wrote parameters to drone. When checking altitude.... --> 120 meters!!

[@dandanu2526]

No luck for me...It doesn't save new parameters.

[@paoloteruggi6342]

I'm writing from Italy, sorry but it doesn't work. I did everything as you explained, but the 120 meter limit remains the same.

[@Shivkumarsd]

Were you able to connect drone to your laptop?

[@paoloteruggi6342]

yes the drone connects, and I do all the procedures... I even wait 2 minutes before disconnecting the USB-C cable but when I then access the menu, nothing changes, the 120m limit remains

[@Shivkumarsd]

@@paoloteruggi6342 this shouldn't happen! This trick worked for most of the people. I'm just wondering if there are any additional rules in Italy for altitude.

[@paoloteruggi6342]

no we have just the 120m limit @@Shivkumarsd

[@Jozin24]

@@paoloteruggi6342 the same by my drone FW 01.00.0400, RC FW 01.01.0300. I can shift the high up to 500m, but it falls in a few seconds back to 120m

[@kr_m_regional]

Drone Hack not working please....

[@kalopinda]

That is EPIC, do you believe that after 01.01.2024 when DJI manually locks the drone max height to 120m this will be able to work also?

[@Shivkumarsd]

Do you think DJI will lock the height at 120m?

[@kalopinda]

@@Shivkumarsd where I live in Europe, from 01.01.2024 there will be regulations, don't know about India

[@ennybm]

That would be only possible if you update your DJI's firmware after 01.01.2024 with the update they supply. Just don't update and you'll have an unlocked drone, no?

[@BlackP.]

Is it possible to set a hight over 500 meters? I have seen a video withe mini 2 pro who has a flight height over 3000m.

[@LeslieFactor]

Thanks for the tutorial Very good video!

[@ivanpeppe]

What is it the e-mail and password that you put?? Honestly I’m trying doing this, but i have no positive result. ☹️

[@AnimationStory-es8ye]

Bhai बहूत कोशिश करने के बाद भी हैक पर drone Show नही हो रहा है सारी प्रोसेस follow करने के बाद भी नहीं हो रहा है Dji mini 4 pro..... क्या करे कैसे करे please बताए

[@AnotherCG]

Its already 500 here in The States

[@dtoor89]

Worked as described

[@Shivkumarsd]

Good to hear

[@Cyb3rByt3]

Didn't work.

[@vadimdash5103]

not working

[@OfficialRedTrycs]

Nice bro😊

[@Shivkumarsd]

❤️❤️

[@BezJourneys]

Down voted video as you said its free but its locked behind a paywall.

[@OfficialRedTrycs]

BRO LETS GOO 14K SUBS🎉🎉🎉🎉🎉

[@Shivkumarsd]

Thanks a lot bro 🤩❤️

[@martinfournier5955]

not working, thumb down

[@niloy42]

thanks bro

[@JohnWick_jr]

Importunately this doesn't work. I mean. You can set the parameter. Save it. But as soon as the RC is connected to the drone again it simply rewrites the parameter. It seems like the DJI Software is aware of this hack so they check it first and then they just rewrite the parameter. But there may be a legal solution that I also tried. You just need to declassify your DJI Mini 4 Pro from class C0. I sent the request and now I have to wait to get the new labels and I'll see.

[@ДмитрийЧереп-л9ъ]

As far as I know declassifying could be done only before 2024, did you actually do that now?

[@stefantrojer6135]

Top❤❤❤❤❤

[@OfficialRedTrycs]

BROO ONLY 100 SUBS MORE FOR 14k🎉🎉🎉

[@Shivkumarsd]

Yeah 🙌🏻🙌🏻❤️

[@boy-oe4oz]

Dji mini 3 pro foggy lens problem solution video

[@Shivkumarsd]

Sunday you will find the video on channel.

[@boy-oe4oz]

Dji mini 3 pro foggy lens problem solution video

[@Shivkumarsd]

I will upload a video on this topic on Sunday

[@mirkodls6683]

not work