SHO’NUFF we set up the Clutch and Throwout bearing shimming

[@DK_tk3]

I’ve never been on this Honda train, But thanks this channel and Boosted boys I’m liking these big horse power Hondas.

[@brennan7085]

I’m currently living only to watch this build come to life

[@McTwistedTwisties]

Life gets better bro, there will be more builds, more time for life.

[@89hybrid88]

Nobody cares

[@NSXTACY420]

Weed is way better for you than meth. And no withdrawals!

[@ace66067]

And he’s not methane around

[@gotembro]

Thumbs up if you have never thumbs down a PFI Video :)

[@tobykiefer7086]

I was just wondering (as i bench some vids) ... who the fuck DL's this information + entertainment He's genius!

[@tobykiefer7086]

Typo!

[@droppinghertz9922]

For someone to thumbs down videos coming from the Tru Hondyota A.K.A Brent im for real people all the time,$,spent on trying to get things done right the first time & here u got the wizards of the Honda game explaining 2 u along with video on how it done proper the 1st time is truly a No brainer that's they equivalent to if college was free it would suckk..ps..Right dat down...✌

[@colemontana8695]

This has been my favorite channel for awhile .....you guys would make for a awesome hot rod t.v show ...all you guys got awesome personalitys and are freakin hysterical sometimes

[@GARAGEIdiotS]

Cole Montana agreed 100%!

[@brkofobija]

Gearbox - working table, marvelous!

[@Spudstrodamus]

I love the tech talk you guys get into. Keep me very interested I love the race but I like what goes into it being created even more.

[@mariusschamrel9514]

So this is a manual ? Oh man!! Stick shift class here we come!!! Sho'Nuff vs Leroy The Savage ! We need to see this happen !!!

[@zacharykelly7434]

Thats precisely what its being built for

[@markfromtexas9810]

Sho'nuff

[@mikedubya9313]

This thing should leave Leroy for dead' once its dialed in

[@buggerlugz6753]

I'm thinking the same.........

[@jasenworrell6214]

As a fan of both channels I'm pretty sure Leroy will win hands down the first race cleetus has way more time with his car over 300 passes and over 100 dyno pulls his shifting is down pact Brent is a great driver and may be able to adapt real quick but hes not going to have "sho down enuff" maybe after more time with he will but not the first race

[@dah8rsluvme]

PFI making a difference for the world!

[@SPTuning]

Clutch came out dope

[@dbooutdoors202]

Can't wait to see this beast make its first launch.. gonna be epic... PFI Speed!!!!!

[@georgem.6136]

Awesome setup! Cant wait to see SHO NUFF when it hits the track! Love the build, the chassis is sick!

[@winchracing64]

Loving the long fab vids !! Keep up the hard work guys !!!

[@hdrenginedevelopment7507]

The F20C is probably my most favorite engine of all time. I can't wait to see what this thing will do!

[@TNGvideos212]

THE MAD SCIENTISTS BACK AT AGAIN WITH THE BUILD WE ALL WANNA SEE SHO'NUFF!!!

[@seudechrist]

How does this channel not already have a million subscribers

[@Franks_Garage]

This build is wild PFI is gonna be on top

[@steelovaldez2513]

Dude good to see pfi speed videos learn alot... keep it up...

[@bjm1682]

Can't wait to see the finished product! YEAH!!!

[@Turboobsessed]

For every build there are obstacle courses. Only the strong and willing are to achieve! There are multiple things that people never see behind the scenes when building a car. Blood, Sweat, and Tears have been true experiences in my builds.

[@Zezims]

The tedious Work that we've been begging for on KZbin

[@killercurl1]

thanks for the hard work i love this shit, bless you guys...... i hope the new shop is coming along and thanks for the upload

[@DresRacingChannel]

Finally finally another pfi sprees upload. Well guess time to lay off work and watch their video!

[@NSXTACY420]

Wow, you got a amazing fabricator there, Brent, he doesn't just build the whole damn roll cage frame but takes charge of most the mechanics as well.

[@el7delasuerte]

True Reality TV. I like this format.

[@cae2487]

You know the guys at pfi are PIMPS when they are concerned about too much head lol you guys are awesome and doing a great job keep up the sweet content

[@JB3924HD]

SHO'NUFF I'd love to come from the UK and meet you guys ❤

[@charlestorruella8591]

Love watching old pfi videos show nuff I live em man even after 2 years I cannot wait for this car to run and please keep the old show nuff sound effects going it's cool as hell cause I've seen that movie a bunch of times and a year ago when I found this it made me watch the movie again 😂

[@maxiumgolf1]

Good material guys! Learn someth’n new everyday.

[@hondarob5371]

Love the content Brent, so informational.

[@pFbSpecV]

That's a killer clutch set up!!!

[@flyingkiwi6959]

one of your best videos so far mate cheer

[@andrewnovak1600]

Sho’nuff’s the best content on KZbin currently 🤙🏽 keep it coming

[@GARAGEIdiotS]

Andrew Novak agreed!

[@xibidit]

what a monster, the Leroy slayer, the v8 killer

[@SomeBoredGuy69]

Grip of clutch plate + massive tires + strong axles + tiny car = MANDATORY wheelie bars!!😋

[@denisohbrien]

its a honda. 0.01ft/lb of torque wheelies wont be an issue ... j/k

[@PATuners]

Very good in depth video i really enjoyed it. WCF I'LL BE THERE

[@josetoro1415]

Jamie should do a video on the set-up they mention for the SRT4

[@jamiepfispeed]

I'll do a video installing it in mine

[@josetoro1415]

Jamie srt4 pfispeed You guys are awesome, keep up the good work.

[@obezzyjohnson9680]

Jamie srt4 pfispeed so wat setup are u going do in the srt4 bro. I could sit around all day n watch u do work n the way u n Brent work together it's like u 2 are real brothers or dad n son lol. But ur work is awesome from wielding to buildn motor to Fab up turbo mani or intercooler or whatever cuz u do it all. Keep up the good work bro 💯 pfispeed n the boostedboiz at the top of the game

[@droppinghertz9922]

#1st time ever herd the saying we got a lil more head then we wanted & we gotta go buy more... & be totally.....* pg.13 * got a lil k&ck outta that lol keep up the Awesome work guys I totally enjoy Raw & uncut and not 50 days worth of edited videos for 10 different segments of 5min videos Respect is given were it's truly do...✌"out..

[@zacharykelly7434]

Ice drags on a frozen lake? SHO'NUFF!!!!

[@Nickpeezy94]

You guys do a lot more on your own then other channels out there 👍🏽work hard play harder Brent could you maybe do a video if you know how to do this make a small motorcycle/moped dyno like budget build lol

[@soillgarage5708]

Nice setup could I get the info on the Srt4 conversion you guys was talking about

[@triptechable]

Awesome progress! Get some toulene in the fuel!

[@xibidit]

that's not a mechanic its a magician

[@Musica2013ful]

Cant wait too see the shonuff done and on

[@jamesmcivor340]

28 min video - yaaaaaas 😍

[@elplevonrooo395]

There’s a lot going on in that shop. Organized mess. Lol. I like.

[@dAtfRkLiFfGuY]

sho nuff dat was an awesome video!

[@sir.lithium81]

Leroy,dahms 4 rotor and shonuff should race 💯

[@keeganpock864]

Sir.Lithium leeroys would win the 1/8 shonuff would win the 1/4 and the 4 rotor would take the 1/2

[@Knoss0s]

@@keeganpock864 I dont understand how 4 cylinders can compete against 8. Specially when the 8 have two fat turbos.

[@keeganpock864]

Weight, aerodynamics.. powers only one number in the equation

[@slowspeed6500]

@@Knoss0s You should ask that on r/ExplainLikeImFive for an in depth answer, it'd be a good read for sure. That's a good question I'd like to see explained thoroughly but on KZbin you'll just get shittier responses. Basically physics and psychology though from my understanding, people make mistakes when they get cocky and it's fuckin hilarious cuz I expect to lose every race I get in and I laugh hard af if I win.

[@nitrousboy0311]

Dahms 4 rotor won't be done lmao

[@joenels4356]

Learning is fun👍

[@GhettoVaqueroTv]

It's gonna be a beast! I hope it really does beat Garret! Just for competition!

[@RustyWells2]

I like that guy Brent is he gonna be part of the crew when you get the race car done?

[@corwininadsm]

Try taking some Quercetin once a day, helps me when I get a cough that wont leave.

[@MafiaboysWorld]

Well, Sho'Nuff Emilio's not getting that gearbox back in his Supra anymore. 🤣😂

[@PFIBrent]

Hell nah

[@MafiaboysWorld]

@@PFIBrent 😂🤣😂🤣 The second I saw the holes being drilled I was laughing like "Yeah, that's no longer borrowed from the Supra". What's ClutchMasters horsepower rating on that clutch for your F20? Been in awe of all of your work guys and if it gets too winter over there, fly south like the birds for the Summernats down here, ask Cleetus what it's like. 👍😉

[@PFIBrent]

Rated for 1400. So if we could end up in that area we should fly

[@MafiaboysWorld]

@@PFIBrent What size turbo were you using before when the F20 made 1100hp in the old car? If you get to 1400hp and hit that 2300lb. goal of yours, you will definitely be looking at a 6 in your future, only a matter of time. 😎

[@gnarkiller]

@@PFIBrent an 83/85 should be enough for 1400 if you have enough fuel right?

[@shawnwalden2669]

cant wait for this monster to come aliveeeeeee!!!

[@teedeps7011]

Now kissss, my clutch masters clutchhhh!!! Yeahhh!!!

[@mikemeisch1445]

Might go over the first set of bolts on the flywheel or flex plate didn't look like he got those very tight.

[@PFIBrent]

Mike Meisch just mock up

[@mikemeisch1445]

Sho nuff can't wait to see this thing rippin keep up the hard work.

[@zandernicholas8391]

Ok cool, I was also concerned about those flywheel bolts!

[@wantapgt]

Since the f20c motor has a pull type clutch from factory, does converting to a push type diaphragm cause any issues with the crank thrust bearings?

[@PFIBrent]

Not at all, they’re similar to a k style thrust which is a pusher , only thing that will mess with a thrust push or pull type is too much weight or bad fulcrum point

[@richardharris492]

I noticed those bolts back when u measured for the clutch, but thought they would be swapped for Allen heads

[@Socalsayten6six6]

You ever going to put a j series in it with twin turbos ?

[@joshuasanford1264]

So are you using longer than factory length flywheel bolts? Where did you get them? Because I know Honda runs that crazy M12x1.00 thread. I can't find them.

[@PFIBrent]

We ended up using the 23 bolts s2000 has the longest flywheel bolts . Auto are the shortest and d series dot bolts are what you use for most twin disks

[@joshuasanford1264]

Do you guys have more info on your mechanical fuel pump setup! I NEED to do that for methanol as well.

[@2is_BUGZEE]

#1 from hawaii keep it up fam

[@freedomfox8183]

People told me this was a Powerglide.. I'll be stoked if it's gonna stay manual so you and Garret have some epic races .. you'd have most likely destroyed him without being manual.. so stoked.. and Leroy's new bell housing is modified to everybody does that for a custom setups..lol "don't even worry about it"

[@PFIBrent]

It’s a Gforce trans , we want to fly with a manual,

[@freedomfox8183]

@@PFIBrent so cool man can't wait for this to be the starting line with Leroy next to him, this is such an epic build .. you guys are killing it..

[@obezzyjohnson9680]

F20c wit a Gforce manual trams Omfg this thing gonna b epic. No lie n I can't wait for it to line up wit ol Leroy lol

[@AbusiveHD]

is it gunna be twin turbo or just a big ole single?

[@PFIBrent]

We have a single 83/85 gen 2

[@89hybrid88]

Brendon Morris not entirely correct, but for drag racing 1 big one does the trick.

[@chaoslove626]

I've been thinking which is hilarious on it's own but you should incorporate Phong's dry ice idea into your Sho' Nuff project, after watching 1320video's germany videos i wondered if it is a great new tech jump in racing!

[@MILANOKIS]

Is that an AWD civic in the background there?

[@PFIBrent]

It is 😉

[@MILANOKIS]

@@PFIBrent Hell yeahhhh!

[@bsells465]

Is that Vicky to

[@stevebeavers3754]

Quality content.

[@cmoores2k]

Im putting a glide in my s2000 and know you have to cut the starter like this one has been. Did you have to do anything to it after cutting the nose off?

[@JJ-yu]

SEAN - I THINK WE HAVE THE SAME WEDDING RING!

[@cjames2864]

Which motor is the transmission from?

[@oumazette9251]

Hlo from south africa. Same guy . Whozitttt dudes.

[@popwarhomie]

No...

[@kylelove927]

That's a clutch for grownups!

[@vvlswapd200sx]

Wouldn't u have to balance the crank after all that weight added on? My guess would be that it will vibrate after 7-8k rpm and hurt the bearings Sorry comented before you guys said it

[@RustyWells2]

Don't worry I caught that joke Brent!!😂

[@userpike]

I wish SPEC's Mini Twin had thick pads on the discs like on this one here... I went with the cheaper alternative to Clutchmasters (SPEC) and got 6000ish daily driver miles out of the SPEC and was told I would get 10-15000 daily driver miles..so every 2 oil changes I get to change/refurbish the clutch..I wonder if those discs will fit the SPEC.

[@obezzyjohnson9680]

Wow I would really hate to keep changing clutches wit every 2 oil changes that's crazy 4real.. It n best if u upgrade to a diff clutch cuz the money u spending on chnging the clutch like u is u could just get a better clutch all together n not hav to worry bout it for a Lil while. Atleast u won't hav to change em every 2 oil chnges

[@MsMotron]

it's not gay as long as the bolts don't touch.

[@ace66067]

Anybody can throw an LS in something and make 500 to 1000 hp only the few can take nothing make it into something and only the unique can go from four on the floor two for under the hood and four digit hp numbers

[@GoogleUser-yj1wy]

It's your fuel man...it's got a nasty hull in it!

[@clavsbergens3677]

#IAmSoldierX #StandWithOurLads

[@Strrazor]

If u was gonna build a trans for a 93 d16 what specs would u do?

[@toki89666]

Here's the thing I hate beautiful clutches and flywheels. You mate up the trans and you never see it again... Until something very expensive breaks. Its a sad thing.

[@mikedale1142]

Cut its face with razor blades before mating.

[@buggerlugz6753]

That shim is just hand tight, right?

[@PFIBrent]

The shop just slides on

[@davecozzie1]

Another great video brent, so how much power do you expect to make from that motor? Cant wait for the next one. Watching from england

[@PFIBrent]

1200 or a bit better is where I’d like to end up

[@davecozzie1]

@@PFIBrent hopefully we will see it dyno'd on the infamous PFIspeeds rollers soon enough. Great stuff brent

[@joelducsai5400]

Countersink those bolts too on the trans

[@travisc45ify]

Part runs always more bolts

[@scottydoesntknow2345]

Stock fly wheel or light weight

[@PFIBrent]

Lightweight 😉

[@6themaker]

14:00 HA! Little more head then you wanted.

[@craig2963]

It seems to me that the pilot bearing should go the other way around so that the locating hole in the flywheel is locating/supporting the bearing.

[@carlinlentz6849]

Good thing someone knows what they're doing, eh Brent ;)

[@single_cam9199]

Sho'Nuff

[@NewfoundlandBen709]

What engine are you running in the car

[@PFIBrent]

F20c

[@BlackyBrownDestruction9337]

It's funny how the srt 4 have manual back windows but power in the front only lol that would be annoying.

[@Shane-qy5fl]

All 4 doors neons had manual rear windows

[@FCT8306onTwoWheels]

That weight reduction tho #becauseracecar this s2000 is a work of art✌

[@stankdank1240]

How can you make such a crazy statment like that about SRT4 and not show us? so many questions WTF??????

[@jamiepfispeed]

I'll do a video installing it in my car

[@mosizlackm7522]

Jamie srt4 pfispeed please do, srt4 owner ready to buy!

[@stankdank1240]

Jamie srt4 pfispeed I’ve been in the neon game since 2000 I own a first gen RT srt swapped and a beater stage 3 srt4 . I love neons . Please make the videos. Talk about the common problem with the T850 will be a great video .

[@nobodyhere4860]

Jamie srt4 pfispeed I have a 04 SRT curse as well! Looking to do clutch flywheel, fork, pivot ball etc. I'm interested in the Clutch Masters setup! PLEASE DO SOME SRT VIDS!

[@Underpantsniper]

what kind of transmission is that exactly?

[@PFIBrent]

Gforce GF4A

[@eclxviimerx7588]

What's a good clutch for k20 rsx?

[@PFIBrent]

What kind of power?

[@eclxviimerx7588]

@@PFIBrent not much has intake header exhaust intake manifold and reflash

[@toddstanley7804]

Go with seqential turbos to give it some low end and fast spool

[@trainsbangsandautomobiles824]

1:20 you gotta yell "focus you fuck!" works for AvE everytime.

[@JnixMarshel]

What's the timeline look like for Sho'nuff?

[@maaadcheddar]

Pretty fuckin' short by the looks of it. Shawn doesn't fuck around.

[@John.strong]

Sho'nuff it will be done ontime

[@King-yt2xk]

shawn aint there to fuck flies, he gets shit done, awesome to see his car/mechanic knowledge

[@rudedogg6674]

love the vid's but what does p.f.i. mean?

[@GARAGEIdiotS]

Rude Dogg Parts Finder International was Brent’s business back in the day if I’m not mistaken, so they just kinda morphed the name into what it is today

[@obezzyjohnson9680]

GARAGE idiots oh ok he'll yea I didn't know dat pfi meant either but that wats up.. Didn't know Brent had his own business back on day. Sweet

[@2006Mercury]

TACO JOHNS SHO NUFF

[@-g-lock813]

WHAT TRANS AHGAIN