Shoddy workmanship RUINED my Ferrari V12! Head bolts (and other parts) were finger tight???

[@junkcarreviews5390]

Hoovie, I just wanted to drop you a note. I'm a tech at a dealership. The blown head gaskets most always lead to bottom end issues. The issue you talked about running crapy on startup, could mean coolant in the cylinders not as a vapor but liquid. This could be bad for bearings, very bad, but not noticed until too late. Please have these guys at Wizards check the rod bearings and if it was at my shop I'd check for rod damage. This could be a very costly and bad situation if not checked, but only a couple hundred bucks to be sure all is good. I watched this video last night and its been bothering me ever since. I've said my piece, thanks for the video, keep them coming.

[@crazyman8472]

It looks like the Wizard and Daniel-san have done a complete teardown, so hopefully they will be able to fix it. 😎

[@ridbanner1407]

Common fault on the Gpz 900. The snapped rod machines a big inspection port about 1000 miles later.

[@thorsrensen3162]

I dont think it was a error from the mechanic. These V12 motors are not suitable designed for anything usefull. They are just money pits which blow up after a short time running and rich people dont care about a repair bill of 50.000 usd.

[@LaGrandeBayou]

Junk car reviews So in other words, if it's only several hundred dollars he might should just replace the rods. Springs etc now? Is that what your saying Unless that leads to an entire new set of issues🤷

[@retrocompaq5212]

water damage in a cyl while running does not grow over time, as soon as the engine cant vaporise the coolant, the rod bends, the bearing does not get shot before or after, it goes with it

[@hadtopicausername]

Can we take a moment to appreciate the systematic and thorough sorting of all those engine parts on that cart? It not only makes the neat freak in me happy, it's also the kind of attention to detail and thoroughness I like to see in a car mechanic.

[@rogersmith7396]

You lose one you are out a thousand bucks.

[@Dobi714]

Dude same here! Completely impressed with the labels and sorting in the wizards shop.

[@hadtopicausername]

@@rogersmith7396 And you'd be amazed how so many people are willing to be out a thousand bucks just by not doing things properly the first time round.

[@MichaelJames-lz7ni]

When you're performing major-surgery on a limited-production Italian Exotic, every piece/part is major $$$.....so your shop bench takes on the precision of a hospital operating table.

[@Beer_Dad1975]

Generally everything has to go back in the same place it came from with OHC engines, because they are machined when assembled - you mix them up, you'll have serious issues down the track.

[@starkyslp16]

Daniel was a great Wizard hire. Love how organized he is and definitely knows his stuff

[@costamesa22]

Did Magic Mike retire ?

[@matzrat5006]

@@costamesa22 too busy at his own shop.

[@stevef68]

@@costamesa22 Magic Mike is in the background @14:55

[@gillesthibault429]

They each have their "specialty". Both are exceptional mechanics.

[@RyanGalt]

Yep yep

[@garywilliams7819]

It's unfortunate to see Hoovie go through life changes such as a divorce. The silver lining here is at least he has a great place within the hanger to store his remaining cars as well as his personal things. Even if its just temporary, its a nice fall back which a lot of guys don't generally have available to them during times like these. Thanks Hoovie for continuing to provide great content during such a difficult situation! Much appreciated.

[@damnitdave.]

He just got his nuts chopped up too i can't believe she had him do that now shes leaving him

[@willasrock1]

Damn, Hoovie cant catch a break lately... I just hope he doesnt get alymony'ed to death. Godspeed, Hoovie.

[@TheGabe92]

I think he will manage, he's not as dumb as he pretends ;)

[@richardsenkBeachwalker]

His wife should have to go back to her former life in Vietnam without Hoovie's money Foreign women become like American women when you bring the to the USA

[@sambone8213]

She hit the divorce lotto and will get a lot of something for nothing.

[@jmos51515]

She has her own money as well. He didn't bring her here from Vietnam. She was here for years and going to school. I agree though. Hoovie is going to sucked dry like a Hoover and not in a fun way. Lmao

[@stoneman8110]

Most states only allow alimony for the exact years of marriage for example if you are together 5 years then he only pays for the next 5 years or until she is financially independent bringing in more than alimony or married again.

[@theredmonkey]

You and Freddie should just move in together like the odd couple of cars. One guy who works on the cars and the other who doesn't. Oh the shenanigans.

[@jmodic]

I second this idea!

[@Iamthehethetheyandthehim]

You clearly haven't watched cartrek lmao they shouldn't live together

[@jannikmeissner]

I guess wizard's bank account would veto that.

[@StringsandWings]

It makes me wonder, what with both of them getting divorced...divorces, like marriages, are contagious. I've seen both too many times.

[@richardsenkBeachwalker]

@@StringsandWings Women have ZERO loyalty. Society and laws have made it so there is little incentive for them to stay with a man.

[@DustyPearl-13]

Tyler is such a cool guy: down to earth, respectful, well spoken and creats enjoyable content! Good job Tyler!

[@Flies2FLL]

The dashboard and door panels on many VAG products are made from hemp fiber and resin. That's why the hole makes the dashboard look like wood.

[@bikergamersoldierspy533]

I love it how the Wizard's garage actually takes engines apart and works on them. It's awesome to see, they're not just replacers, they're actually mechanics.

[@chash7335]

The cylinder head nuts were loose because the engine was over heated, causing the head to expand and be crushed by the nut. When the engine cooled, the head is now less thick so the nuts are loose. I've seen this on Mercedes and Rolls/Bentley engines that had never been apart. Sometimes the head studs/bolts will also strip-which can be a nasty surprise when re-assembling the engine. Good luck.

[@towerlouis]

Why wouldn't that happen on both sides?

[@chash7335]

@@towerlouis Luck? If the engine builder didn't tighten the head nuts the engine would have developed a a serious leak immediately.

[@motorhouse5231]

I could be wrong but to me it doesn't look like a headgasket failure either. Headgasket looks to have been damaged while removing the head, the damage does not appear to travel from the coolant passage through the firing ring or through a oil passage. Cylinders don't appear cleaner or have less carbon buildup on the bank with the failed gasket compared to the other bank. The plugs appear to have water marks above the crush washer, meaning they were sitting in water rather than coolant/water being in the chamber. Possibly this is the miss and the overheating issue was related to something else?

[@SkunkieDesignsElectronics]

Bingo! I've also see engines get so overheated it anneals the alum heads, turning them into soft junk.

[@epi2045]

I agree. Amateur diagnosis on Hoovie and pals part. The engine was a turd before the loose bolts. Because of the pre-existing problems, loose head bolts maybe true but saying it was the mechanics fault… very short sighted. This is what you get when you buy junk or bottom of the heap examples. I have owned Ferrari and Aston’s and have the complete opposite buying habits. I don’t look for the bang for the buck high mileage sketchy stuff. If you want a bargain exotic car, you are also wanting headaches.

[@gavinplunkett977]

I am so glad, despite what is going on in your life, you seem to be doing OK. All the best really, enjoy watching your channel.

[@kurtisstutzman7056]

Jeez...! Sarasota Florida they charge $175/hr to fix my 94-96 F-series trucks...! Thanks, keep up your awesomeness...

[@TheGuccibane]

Tyler is the perfect guy to do business with man. What a class act

[@tomtheplummer7322]

...that’s why he failed at being a stealer dealer. 🤷‍♂️😏

[@mannye]

Seriously. I was interested in buying his Cadillac Eldorado and we emailed back and forth a bit, and he was very fair with pricing. If I hadn't lost my storage situation I would have 100% bought that off him.

[@TheGuccibane]

@@tomtheplummer7322 you reinforced the point even more with your statement. Stealerships and hoovie is no slime ball

[@AB-80X]

Are you sure about that? He used to work for Barrett Jackson - the most fraudulent auction house in car auction history. I wouldn’t trust him further than I can throw him.

[@dillonh321]

@@AB-80X He just walks around the showrooms and hosts videos for them. If there is still fraud at BJ then I’m sure he isn’t involved. But the fraudulent activity I can remember happened like 15 years ago which is quite some time ago.

[@michaell3739]

I know the 599 wasn't well loved when it came out, but its actually quite beautiful.

[@donaldsillence6853]

Yes indeed

[@DutchManticore]

Much prettier than the bland nonsense running off the factory floor today. Modern Ferraris are soulless in design compared to the old stuff

[@richardsenkBeachwalker]

it grows on you

[@richardsenkBeachwalker]

@@DutchManticore Very different company than 20 years ago.

[@michaell3739]

@@PlastervilleProductions TBH I love the SLS and the Z8 to look at but the 599 is an amazing drive, I can’t imagine how good it is with a gated Manuel. So I’m kind of inclined to agree with you.

[@dr.mantistoboggan4746]

Hang in there buddy, your fans are here to help you get to the other side of this thing. I hope young men are taking notes...

[@jbwolfe]

I was the airline pilot that said hello to you at O'Hare on the 16th. Hope your travels were pleasant.

[@michaelscott2481]

I’ll never get over the Buick door hit. It’s a treasured piece of history now 😂

[@magadelina-wb3pn]

This channel is a great fantasy of vicarious car purchases you always wanted but couldn't afford + a comedy of a man dealing with all the issues said cars have. I love it.

[@Goneawaynow543]

Glad to see the Mustang & Maybach fixed, and hopefully you're doing better too, take care of yourself 🙂

[@WhittyPics]

I haven't seen Magic Mike in a while in the Wizard videos. It is good to see he is still working for the Wizard in the background

[@jetcitykitty]

Love you, Tyler! Things are going to work out, so sorry that you are going through it, it really is heart breaking 💔 and I know your daughters wellbeing is probably your biggest priority, and thats because you are a good dad, youll always have that, man, and that is a true blessing 😊❤️

[@TheInsaneShecklador]

What about his son?

[@phil4986]

All engines are very complicated to work on. The more cylinders, the more complication. This why when I am working on engines, I don't let anyone come up and start talking to me ( like Hoovie😂). Even in a simple oil change, you can miss one thing and ruin a motor. Those head bolts have to be tightened in a certain pattern and that pattern could even be two phases of completely different bolt tightenings too. This is just one crucial part of many crucial parts of a great engine rebuild. Also, once the engine is run in safely for 600 miles or maybe 10 hours, those head bolts have to retightened again. Valves may need to be readjusted. Many other bolts tightness may need to be checked. In a certain pattern. In a certain way.A new engine is like a balloon. It grows when hot and then it shrinks when cool. They are designed to allow for that but necessary torque settings on everything in the engine have to be obeyed to let any engine survive that. In low powered engines, these procedures are usually much simpler to complete but in high powered engines, they are mandatory. All of them. There is no short cutting the mechanic or saving the cost of the follow up engine rebuild maintenance procedure. These head bolts will back off and this kind of head gasket issue will happen. And most of the time, as soon as that coolant starts scoring the cylinders, a very expensive engine disassembly and repair has to be done. With ALL of the crucial steps to have to be done all over again. Having this kind of mechanical lack of attention happen on a piece of artwork that is a Ferrari engine is truly sad to see but it proves that every great mechanic is worth his or her weight in gold. That black Ferrari is simply gorgeous. Definitely on my lottery list if that ever happens. I'm not holding my breath.😂

[@TheSonofruss]

As the crank turns these are the rotations of their lives

[@gstevens6948]

😂😂😂

[@bigstew9724]

I’m here to contribute to the repairs. So sorry for your current troubles.

[@rogersmith7396]

Hoovie needs crowd funding for his daily driver.

[@philp9957]

he doesn't need your money

[@DutchManticore]

You're donating to a millionaire? To fund his Ferrari maintenance lol

[@gregdixon5848]

Its been great watching you get your groove back. The Murcie is heart breaking for us too but you know the routine. In a couple of years it pops up in the hangar because you bought it back from Dan on your right of first refusal.

[@damstachizz]

Give it a year or 2 and he'll find a non running manual one and snatch it up before ed can, wizard will be looking at yachts again with a $20k quote and our boi will be back

[@toddrobertson1398]

This guys organizational skills is on point!

[@danielflack7902]

Those head studds will have stretced on that blown bank. All the loose studs are on the exhaust side of the head, thermal expansion of the head when it overheated, stretched the studs, which gives you loose nuts.

[@shrekdonkey9551]

I KNOW when my head get overheated and blows into the cylinder I’d have loose nut too

[@tomtheplummer7322]

...all stretch to torque, one time use, so replace all of them. 🤷‍♂️😏

[@robervin9107]

Love you Tyler hope everything is going as well as can be bud stay strong

[@pazuzutru-truluv7094]

Sympathies regarding the surgery. You are a brave soldier and I just pray the painkillers are great (especially with a glass of red wine). Dearest Hoovie I hope you recover and “bounce” back. Love your content and actually care about your well being.

[@harrystone8847]

Smart idea; painkillers plus alcohol. 😵

[@seanm3ify]

Great advice! Painkillers + alcohol. Why not suggest some fentanyl while you're at it?😕

[@Directo13]

Dude. Alcohol diminish or augment the effects of the medicine. Including the side effects! Don't drink alcohol or grapefruit while taking medication!

[@JoeVinson]

It's not a very serious procedure. I don't believe I was given anything for pain when I had my vasectomy.

[@truetech4158]

Testicularily speaking, the cutting of the vascular plumbing lines really would seem to help the bouncy bucky balls to seek safe travels tucked away under the ribcage of R value in the winter, while also allowing for them to hang out below the pantleg of shorts during the coolant effect created by the opposite low hanging pendulum balls of summer that help stability when walking. Boston dynamics could make some balls for Atlas or Spot to help boost leverage high jump and long jump, and the surgery would include haptics for easy replacement.

[@saywhatnow57]

My next-door neighbor's son bought one of those W12 VWs back when they were new. It was pretty cool at the time.

[@tayzonday]

How much money has Hoovie spent shipping cars?

[@mpowerness92]

Baby’s brains. Chocolate rain infects the memb-o-rane

[@rogersmith7396]

He ownes Fed Ex.

[@kalashnikov1343]

​@@rogersmith7396 FedEx doesn't transport cars.

[@One-Crazy-Cat]

It’s a business write off anyway for him.

[@y2ksierra]

He keeps a lot of industries going.

[@talibali166]

Hoovie: what do you think of the estimate? Wizard: *Takes a look at an estimate Wizard: I should just raise my rates. Lmao Enjoy seeing you both!

[@raygunsforronnie847]

I had a client inadvertently reveal what they paid another service vendor in a similar market, and the next year my rates went up. I sent the other vendor a note and said "you've got some room for inflation now." 😁

[@bryduhbikeguy]

Regardless to the repairs cost,Hoovie still promotes his 'Repairman's' new YT channel.That's Class.

[@bobulele]

That V12 block is crazy looking.

[@jacob1423]

ya it is wicked looking

[@plunder1956]

I currently listen to videos on my slightly base rich headphones. at 2:15 I was hearing a nice engine sound behind me (So whichever microphone was in use does a lovely job 🤓) . I'm wishing Tyler Lots of positive luck right now, because of all the changes. Take care Hoovie.

[@Timjacks01]

Always a good day when Hoovie posts 👍🏻

[@TheDudeRc]

Tyler, I have been thinking about that Mustang for a minute and wondered why you dont use that pressurized oil system any more? Its job is to prevent the rocker failure you have had. Rollers shouldnt need it but that tank behind your seats needs to be pressurized and opened before a cold start to keep that race engine lubed.

[@TheGabe92]

Gotta love Daniel-sans dry humour!

[@mattarnold7633]

That's compressed wood fibre moulding. Like Injection moulding plastic. Quite common for interior parts to make the substrate.

[@MrKoaz72]

So your having problems with nuts and bolts? Poor Hoovie🙏

[@Cinephilesteve7909]

I sense the sarcasm lol 😂

[@HooviesGarage]

All healed up there!

[@mattb6001]

@@HooviesGarage glad to hear! I was genuinely worried after your grand national door incident 😂

[@LordBumSniffington]

@@HooviesGarage can confirm 👍

[@Goneawaynow543]

@@HooviesGarage 👍

[@thatguywillt]

Take a very close look at the connecting rods on the Ferrari. I took one apart that ran OK, but had a bent rod.

[@lutomson3496]

And re torque the heads is part of maint and checking bolts when timing belts are replaced

[@jayzee1271]

Never ever ever give your mechanic an invoice from another shop😂😂😂

[@whatdoesnt]

I like watching Hoovie because it makes me feel less lazy to do the small 100-300 repairs on my cars 😂 I just think it could be worse I could be working on a Ferrari 😅

[@carcissistmoto6616]

Love both the wizard and the ninja and the other mechanicals. Really appreciate the videos!

[@YouCallum]

Ooh a Phaeton at the Car Wizard's shop!

[@jonathanfreedom1st]

Ball busting ball and chain, door checked nuts and last but not least, Loose nuts and bolts. Are we starting to see a theme here?😂😂😂😂😂

[@bradbozarth3235]

The corroded gasket is most likely the cause for the loose head bolts

[@vintagesewingcentermuseum6636]

New to your channel, and your car life. Just wanted to say thankyou as a long time amg owner . wkb, Tulsa

[@russelljacob7955]

Where is Euro Asian Bob??? Bob! Find Hoovie a Solara V6 Convertible. Needs a win!

[@Raider19582]

$175 an hour for those exotic cars 🚗 is probably cheap! I wish I had a Wizard here in Illinois to work on my 94 Z28!

[@CarWizard]

Trust me. There are idiots that say its overpriced.

[@rogersmith7396]

@@CarWizard Used to be $65 an hour. Like an MD.

[@01Bouwhuis]

​@Car Wizard I am one of them...vw mechanic works on vw, porsche, lamborghini. Still gets the same pay. What are the additional costs?

[@pawsnpistons]

​@@rogersmith7396When? 30 years ago?

[@AutoEnthusiastJC]

agreed. I believe most Porsche dealer rates are at least $200 now, probably more after plandemic.

[@heyitsfranklynn168]

Gosh im going to miss that mercy. That car is what got me into lambos. Thats what introduced me to the channel. Thats why i love orange cars. Ill miss your friend as well.

[@RyanRoadReaper]

So sad to see the Murcielago gone

[@Hotlog69]

It was well passed it's time.

[@zepedrofd]

"Fits like a glove"...and Harry laughing with his Testarossa fitting a boat engine in the front with room for bottles...🤣

[@01gtbdaily30]

It’s almost like that chassis of the 599 was designed to have a V12 in the back lol.

[@dth2brny121]

Hoove, great to see you back up again after getting knocked down as hard as you have (and no, I'm not quoting Chumbawamba, LOL). Keep pushing on, and DRIVING ON 😁

[@luiseduardodelgadoflores4497]

Loving these videos! Keep em coming Hoovie!!!

[@Neophobic]

The 599 is my absolute goal dream car. There arents a lot of videos like yours going thhis in-depth. So, I 've got to thank you for this experience. Not sure if i'll ever get to get into one myself

[@TheBobes]

Damn, that Mustang sounds amazing! :O

[@mrgentley]

Hey Dan, I had to take a second look. Long time no see. I'm glad to see you're doing well.

[@podoodop]

Call Matt Farrah. I think he's been working on a story about these guys.

[@skeetamacgyver1821]

I would be removing the oil sump and checking that the connecting rods had been properly torqued to specs. If they missed three or four head bolts/ nuts they could have missed a few rod bolts as well.

[@herculesrockefeller8969]

Good luck Hoovie! 🙂

[@theboogeyman9813]

The high kick is back boys. It must be a good day down there.

[@KarelBeelaertsvanBlokland]

599 - 456 GT - the Mustang --- You are such a lucky guy having these beauties!

[@texasknight5175]

Will the hanger become the new Hoovie lair? Also, if you ever need a 4th for pickleball, send me a note... ;)

[@admranger]

Yeah, saw the court and thought that was a great use of the space. How many balls have hit the cars though?

[@Sonic-gy7kq]

I love your channel hoovie you and wizzard are so wholesome. Stand up guys

[@DanielJamesEgan]

Hoovie should get the GTO grill for the 599. Looks so much better IMO, especially on a dark car. The factory grill looks a little busy, especially for such a sleek car design. It looks like it should be on something angular and funky from the late 80s.

[@johnniemiec3286]

"Yeah, don't do that. You might fall and hit yourself on the ground again."-- Wizard gold right there. 19:09

[@Fasteddiebreakshearts]

If you do it yourself…you’ll know it was done rite 😎 Wrench 🔧 Everyday 🤙🏾

[@rogersmith7396]

Or at least it was done. Sort of. Well worth a Craigs List warranty. If only you can find the receipts.

[@deanwinchester7179]

You forgetting which channel this is? If Hoovie did the head gasket it would either not get done or be back at Omega within a month lol

[@justinminer1354]

Of all the cars I'd agree with you on, an old V12 Ferrari is way at the bottom of the list 😂

[@Billybadassboi]

Gotta love man that works on his own cars…whether Ford or Ferrari ❤

[@richardsenkBeachwalker]

i fix it myself as much as I can

[@joevanlear7566]

At least the door didn't attack your leg!!!😂

[@dwalker112]

That Phaeton in the back 😍😍😍

[@craigpilgrim5793]

"I need to get this out of your hair" (on "wizard"s beard, he has no hair on head). Good episode though, I really enjoyed it ALL the way from Brisbane, Australia.

[@ModelA]

So, Tyler is living in the friend's hangar now...

[@saywhatnow57]

Have always assumed it belongs to his dad. I think the Blazer you see in the background on the videos is his dad's. There's also an old video of them having his son's birthday party there, which would be a weird place to do that if it wasn't just a family spot.

[@ModelA]

@@saywhatnow57 Was wondering. In a previous video, he called it a "friend's hangar"

[@daakrolb]

“I’m goofy hoofy! Look how silly I am! Yuk yuk yuk! I act silly!”

[@jowarrior]

6:10 Mr monopoly didn’t had a monocle, Mandela effect strikes again.

[@dpwellman]

Mr Peanut does, however.

[@ZGryphon]

Probably mixed him up with that _other_ icon of ostentatious luxury, Mr. Peanut.

[@andrewfletcher5584]

Saw the engine on the table at Omega a week ago, can't believe it was this bad!! Holy moly! Had never seen a V12 that far torn down before.

[@BigSteve_Gaming187]

That is one thing I learned when buying a car, even from family. Just because a coolant overflow tank looks healthy, it doesn't mean the coolant inside the engine is. I change my coolant here in Wisconsin every couple years just to be safe. Letting old coolant turn nasty eats at stuff and can eventually cause internals to rust. Particularly when people in an emergency throw regular water, which often has a high mineral content in to get them going again and forget to remove all of it with fresh stuff. Point is for those who don't know, now you know...

[@anthonyslazas6413]

That's definitely my favorite car of yours Tyler. Especially after the manual conversion.

[@kerrylewis2581]

Tyler has had some curves thrown at him lately. I hope the fan views help him get back on track.

[@manher4335]

It's true. Those v12's have a good length compared to v8s. No wonder it's for distinct applications, with compromise likely. I absolutely love em', probably my favorite layout.

[@jowarrior]

Also wasn’t EAG known for scamming customers? Wasn’t tavarish / Ed bolina / Matt Farah refusing to engage with them due to the scammy nature of it?

[@ronwhitmill7068]

Care to expand on that?

[@EDITURSTYLEUSA]

Can I just say something here for a second? We have all come to love "the man" and the content incredibly. I have been watching the last few videos, and there is obviously something financially amiss. So, today I started thinking, has the time not come to give something back? 1.51 million subscribers, if we all pay it forward $1, our boy is hopefully out of the woods and back in the game... $1, less than the can of Coke, what say you people, can we do this? No more, no less, $1 to keep us all happy and give something back...

[@thafather414]

Imagine feeling bad for someone that was foolish with their money and giving them yours

[@EDITURSTYLEUSA]

Not foolish, entertainment...

[@yep-that-happened]

Ferraris are beautiful cars. They always look amazing on the back of a tow truck.

[@rogersmith7396]

They really class the tow truck up.

[@AxLWake]

I'm always amazed at how much is wrong and need fixing on cars that have such few miles on the counter.

[@ChrisPatrick-q6k]

So excited, and a Phaeton too!!!

[@TundeEszlari]

You are a very good KZbinr. ❤

[@luisruelas9763]

Great video Hoovie, has been quite time seeing your hoovie cars getting dialed and fix.👍

[@naradaian]

Supercar dan has to be the most boring person to fill 10 minutes with....what a snore...no more of him

[@xiukn8]

Wizard complains that he charges too little in comparison to the other shop but Hoovie literally said they would do it for half that estimate… then wizard says that he would do it for a little more then half… so I guess their prices are similar. Hoovie went to them with 1 car… and got the same price like at wizards with hundreds of cars and “bulk” prices 🙄 And consider that wizard would replace only 1 not 4 valves for that price 😂

[@bobulele]

Hoovie Friday!

[@stephengreen3566]

When the Wizard said, "I deffinatly need to raise my rates.", I was eating and nearly spit out my food. LOL

[@AaronSmith-kr5yf]

You can feel the utter contempt Danielson has working on that W12 Phaeton. No hesitation when Hoovie asks him if he prefers wrenching on the V12 Ferrari. Despite that being A HUGE ASS job that you need to be very meticulous about. The Ferrari just seems like it is logically laid out and maybe doesn't suffer quite so bad from the "10 pounds of shit into a 5 pound bag" like the W12.

[@MA_808]

NEVER show a vendor you paid more for something.

[@grabsme]

Well he didn't pay more for something. If you listen with the ears on your head he said he didn't pay full shop price lol.

[@ermias75ermis2]

Even so he paid almost double than the Wizard . If you used your brain you would have understood a discount can only go so far. Therefore he was still robbed by them.

[@grabsme]

@@ermias75ermis2 he literally said in the video he DID NOT pay the amount it said on the invoice. Also he didn't get it fixed there. He did the shit that it took to get him back to Kansas. The rest of the work will be on the wizard. Do you guys all have a problem with your ears or?

[@ermias75ermis2]

@@grabsme It´s a scam.Nevermind he didn´t pay the whole amount.If i charge so much a fraction at the end is still too much.Get it? It´s the principle that counts. You make it sound that he dodged a bullet when it is the exact opposite and aart from that the Wizard is still expensive.

[@6B8RX]

I love Dan's t-shirt! When my friends and I were racing Fiats, we joked that Ferrari's symbol was a prancing horse, so ours should be a begging puppy.

[@jongib6096]

Can’t believe Asian wifey was cheating on him, sucks biting the hand that feeds you!

[@grantbuxton]

Hoovie! The smartest automotive channel on KZbin!

[@markdagostino4891]

Dudes prob going through a divorce with all these financial issues he claims and having to sell so many cars??

[@superregera799]

It's really none of your business, but if you watch him regularly, that should have been obvious for months.

[@markdagostino4891]

@@superregera799 oh so it is true? Thats sad didn’t they just have a new baby?

[@superregera799]

@@markdagostino4891 Don't know sorry, not my business.

[@fransb8543]

That manual swapped 599 is a real treasure. If you had to pick only one of your cars to keep, it would be the one for me.

[@richardsenkBeachwalker]

Its a good choice.

[@prezzzrock]

First!!! Not sure why that's important to me. Sort of disappointed in myself.

[@rogersmith7396]

Get a vasectomy.

[@ToolsPlus-z7k]

I enjoy watching you guys.

[@brandonhornung4489]

Please keep this going i will keep watching and supporting you through youtube.