EDgun Leshiy 2 9mm

[@bluewater454]

I’ve been waiting for someone to review the leshiy 2 in 600mm. Love it. Want one

[@aislerunner_605]

I have a Leshiy 2 in .22 cal 350mm barrel. I tuned it to shoot 24.8 NSA slugs. One thing to keep in mind when it comes to Leshiy 2’s Alpha Precision barrel is that the bore diameter is slightly bigger than some of the other popular barrels in the same caliber. For example, I use .219 for my Leshiy. If you use Patriot .217 or .218 the accuracy won’t be good. I absolutely love that gun. I can hit a golf ball at 100 yd with that gun no problem! Great little walk and stalk hunting setup for quails and rabbits, even turkeys too here in CA.

[@williamr9537]

A very good review of the Leshiy 2 9mm. I have the Leshiy 2 with the FX/Huma barrel port adaptors that allows me to use FX barrels and liner kits in .22, .25 and .30 calibers. In only a few minutes you can easily change calibers. The Leshiy 2 is such a rugged and quality rifle and well as having a great hammerless design. I would consider the 9mm pretty much a medium to larger game caliber for critters like groundhogs and coyotes. So shot count would not need to be high so what was your shot count as the rifle was set-up.

[@amazingairguns6350]

My father was a master gunsmith. So I grew up, started shooting at a very young age. I always had the tightest groups, the best shooting guns, and everything that I’ve taught people on my channel about barrels. They’ve used an award for them. And I gave that away free I bought eight of those junk guns with their junk liners and there are three piece valves which break and leak constantly. When I had those guns, I could not believe how terrible they shot. You look at my first video the truth about airgun slugs you’ll see I was really excited about shooting those guns right about the guns I bought barrels I put a barrel in the Krell puncher breaker, bonded the barrel to an external liner, and he just very well done, and that things shot like junk. Then I got my other guns from them which I tried to hold back on. I bought it one time Rick I start shooting these guns and they all were the same palace. They were great slugs holy crap all over the place. So what did I decide to do? I decided to make a video about their liners at the time of Utah, so I can get it out there while Matt Dahmer was out there and use his own inflated ego on him. If I didn’t do that I probably would only got I don’t know three 400 views but because I did that and he with that big eagle had to make a video about me I got 36,000 views and everybody saw what those liners are. And at the end of my video when I was telling people all the issues with those liners. Do you know what I Cedric? I said don’t take my word for it check your liners. If you got the gun, you got the liner right there take that slugger that pull it and drop it through the barrel push it through and you’re gonna see what it does. You push a pallet a slug down the barrel it’ll it’ll be tight at first maybe loosen I’m gonna hit another tight spot in fall through 8 inches till it gets tight again. That’s because you can’t press rifling in externally when the tubes are not true. That’s why their slut barrels have to have a choke wreck because they are junk and the choke might make them more accurate than if it didn’t have a choke, but a choke makes a slug in accurate, and that’s a fact.

[@behindtheseeyesiseewhatyou8953]

I disagree. It is made beautifully. The tech developed, engineering time, manufacturing in low numbers is worth a great deal. This gun is in the Top percentile in quality and reliability. It has spawned many copies. If you comment on price I can appreciate the comment for sure. It’s an almost unaffordable hobby. Like Hockey and Saltwater Aquariums.. don’t forget boats! I wish I had this, I’ve shot it and loved it. I was hoping to have one this year, medical issues has put it on hold but I live through these videos!

[@shooter1721]

@@behindtheseeyesiseewhatyou8953 thank you for watching and commenting I appreciate it. I hope and pray your medical issues and you get well soon.

[@thebeardedairgunner]

Phenomenal work brother! Excellent rig! Definitely looking forward to seeing what the future holds with this one! Great video as always brother!

[@shooter1721]

@@thebeardedairgunner thank you 👊

[@mikecarter4412]

Excellent gun just massive. Personal experience with the 450. The beauty of the L2 is compactness

[@williamwilson2624]

Edgun makes some nice rifles. Great video!

[@PaulPurchase-s7n]

Rick.There is also a tool kit in the hand grip.

[@CJMann-zg6fu]

Thank you very much for another great review. This is a great gun, well made, and very accurate. As always, excellent shooting Salute

[@shooter1721]

@@CJMann-zg6fu appreciate you 👊

[@CJMann-zg6fu]

@@shooter1721 Likewise

[@jjssnb3790]

That’s an awsum gun Rick and as always amazing shooting my friend 🤙

[@shooter1721]

Thank you

[@jjssnb3790]

@@shooter1721 rite on 🤙

[@gutiguti3914]

Un espectáculo de rifle 👍👍👏👏👌👌👊👊🧉🇦🇷 saludos

[@delmarcurrier]

Wow that’s amazing gun both all of them are in ur hands

[@ElmehdiMaroof]

Как вам произведение нашего Эдуарда? Не перевелись еще в России Кулибины)))

[@UpNorthAirGunner]

Damn! Drilling a hole in that steel with that thing! Great shooting Rick!

[@shooter1721]

@@UpNorthAirGunner 👊👊👊

[@fieldpro5041]

awesome video and shooting as always brother. thats a keeper

[@LRF1-9-7-2]

I own 6 L2’s and over 20 of the top of the line air guns. They all can have there issues with leaking and creeping regulators, it happens to the best of them. The L2’s are great guns. Easy to work on. Learn how to work on them and you could fix them yourself. Brian has good videos on how to fix some of the problems you can run into.

[@mikecarter4412]

Amen!

[@oldmancrypto6190]

Ok great video. Also can you do a Airgun review video on the Rattler 357 and the 457 from Western Airguns

[@gbitencourt]

This manufacturer has true legendary status, albeit it's founder personal politics controversies. It's way above what you get from other players in terms of engineering and quality. Everywhere else it's just a 10cc above last iterations for the same overpriced cnc machined piece of aluminum.

[@jbhk7977]

Eduards stands on politics are legit my friend. Do fall for the "na rrative".

[@gbitencourt]

@@jbhk7977 all of them are criminals with their thoughts, the nato "work" in the area, that stupid progressive clown but specially the russian genius.

[@hunterx2210]

There is a jet inside the forward plug. it's 0.7 default factory. You can change the size of that jet to many different size and it gives different result. The smaller it's, it push more air out (air cost). That's why some case with 30 cal this gun can go over to 1000+ FPS. I haven't test on 9mm caliber yet. It's a very good rifle but yet not being mention in many "top airgun".

[@TheAsa1972]

Iv had my .177 over 1000 fps

[@offroadfreak8582]

I have 2x .2 jets and the reg at 180 bar. It’s a blast literally (9mm 350mm barrel)

[@mackattack8627]

About Time This Gun In The Correct Hands ✌

[@shooter1721]

@@mackattack8627 👊👊👊👊

[@HarryPredator]

Nice videos....best shot hunting video 💯 great 👍

[@Jesusreyes-in6xi]

That is a well built machine love my 5.5

[@faustotinoco779]

U should make a comparison with the leshi 2 vs the fx impact m4

[@scottkelly379]

Lovely gun ,great video 👍

[@HitokiriRaiden]

If I could only own one pcp this would probably be it. Definitely a costly rifle but a really nice rifle,

[@macabespeed]

Just got mine too!

[@Reviewbuddy296]

I have the 600mm same as you and I can’t get it to group. What kind of scope would you recommend and is there any kind you wouldn’t put on it. I was told the lpvo I have on it is the reason it won’t group. Is there any validity to that?

[@gwhitfield4239]

Wow😮❤

[@ericteipen]

$3200 plus tax. Yeah I'll pass. I didn't pay that much for my custom Horizon Vandal in 22 Creedmoor I also own a bunch of PCP guns too but 3K is just a stupid price for any air gun. I thought that my Airforce guns were too expensive but WOW. lol

[@User65400]

В России он стоит 2400 долларов в заводском исполнении, без улучшений

[@marianol1727]

What is your jet and plenum configuration to get 897fps with FX hybrids??? I can not reach more than 860fps with that ammo....0.1+0.1 installed and 195bar at reg

[@chrisfigueroa3361]

I want one 😍😍😍

[@amazingairguns6350]

Rick, can you more elaborate on the comment you just made. About the MCA are the 7000 psi feel pressure the regulated 4500 psi I’ll put pressure. Can you elaborate on that why you say that they are not good

[@shooter1721]

@@amazingairguns6350 Please tell me where and when I said this ?? I don’t remember saying that … happy to elaborate

[@bladimirkroutska3707]

After the hype AEA brought to the industry it's been nothing but bordom ever since. I'm wondering if and when I'm going to be intreagued buy a rifle again.

[@Peter-tb3pq]

@@bladimirkroutska3707 What AEA is making the mcar 1000 yards air rifle and it shoot 1 moa at 1000 yards.it will fill to 7000 psi .reg pressure will be 4500 psi

[@Peter-tb3pq]

@@bladimirkroutska3707 if that doesnt exited you I dont know what will

[@chriswedgworth]

Nice

[@AZBADBOYz]

GAWD DAMN, $3200.00

[@scinner28]

it is expensive but ..all high end semi are..see the western airguns etc .Can i buy 1 maybe .will my wife say buy 1 hmmm 🤣🤣🤣 if you look for a cheap 1 go hatsan?

[@AZBADBOYz]

@scinner28 I get it, I have an FX all decked out but that's my limit for a PCP. If I lived in a commie state and couldn't own real pew pews then I'd consider but I don't.

[@hypno18s]

if you want a cheap 9mm semi auto pellet gun the T9 is only $899

[@hypno18s]

@@scinner28 True semi auto are expensive as crap and require more care tbh.

[@jbhk7977]

@@hypno18s I have both the T9 and L2, it's like a Prius and European build Mercedes. In the end, both will get you where you want to be, but the Prius does it with more hickups. The T9 .357 is okay but it's semi auto technology is still fully dependent on the flimsy magazines (achilles heel for AEA/BinTac) granted, they are alloy for the T9 but the plastic transp. cover is still a weak link. The L2 pushes your pellets through the magazine. No probe, no hammer just pfffffft air.

[@Peter-tb3pq]

What is the twist rate on the MC aR 457. I mean you’re already putting it down what’s the twist right on that baby huh? How is it able to shoot such tight groups at 1000 yards. I mean FX can’t shoot 300 yards without an 8 inch group. So please explain to us, Rick why that gun is crap because that’s kind of what you said.

[@shooter1721]

Again …when and where was this said ?

[@heithwatkins]

It's almost as accurate as the Gauntlet 2SL 30CAL 😂

[@Davidtheinfidel]

What ammo are you shooting

[@shooter1721]

@@Davidtheinfidel 81 JSB pellets and at the end FX 68 gr Hybrids

[@rolis.j]

Shooter1721 hey did you not checking yuor audio?sounds bad,change a mic or change a mic placment

[@shooter1721]

@@rolis.j yep it’s my fault I finally found the problem it will be fixed in the DRS video coming up .

[@nickhathaway4617]

I honestly think it doesn't sound bad​@@shooter1721

[@steveburlingame1935]

Whats the fpe and how many shots

[@amazingairguns6350]

And here’s another thing about working pressures 1700 psi 2000 psi is not enough to get real accuracy out of slugs. My K-1 has been set up for a year and a half now shooting 1150 FPS and it’s 22 caliber using 40 grain slugs. I should under a half inch rack is that just a lock rack? Of course I laughed and polish the barrel, like I always do but how many half inch when the gun started out it was under an inch it was 7/8 of an inch, which is still great. This is the fabric you said what that I don’t know what I’m talking about. Let me tell you a fact , three years ago, I said the pressures have to go off wreck because it more duplicate a firearm, the higher, the pressure, the harder the smack duplicating fire arm pressures much better than low pressure. My 10-year-old kid knows that why don’t you

[@Hubenairguns]

Hello I would like to come to p.a and shot with you I have a couple big bore Airguns I want to test

[@LessThanLethalGamerZ]

These 9mm used to be a good deal at under 3k. Why did edgun west increased the price by a whopping $500 ?☠️

[@nickhathaway4617]

How the hell do you not have over 100,000 subs what is wrong with people

[@shooter1721]

@@nickhathaway4617 I ask myself the same question some days

[@gofy8481]

I owned a Leshy 2 in 25 with their expensive moderator. After a few months it was all over the place on an accuracy basis. The tank would not hold air for very long. Took it to Brian, Edgun West, and they charged me to fix it! I had their mod kit, everything. These guns are good short term, but long term they are crap. You'll never know that from these type of quick evaluations. Also, most of these people are not buying these, and in many cases are working WITH Edgun West. I got rid of the gun. Keep your money, and buy an FX or a Daystate or something else. I owned 2 Edguns, and just about every other high end gun. EDGUN was the worst, and Edgun West has the worst customer service.

[@Xplawd]

I just love how you pretty boyz advertise FX😂 It's just amazing. But like i said on the other comments. "SKOUT EPOCH" is catching fire. FX is not even close on its so called technological advancement. And SKOUT EPOCH IS WAY CHEAPER AND MORE ADVANCE, NOT TO MENTION THEIR PACKAGE BUNDLE. SO, YEAH KEEP SHOUTING HAHAHHAA P.S. This is Semi-auto Tack Driver(Leshi) The so called most advance "FX M4" would probably do this say.......when it reaches....."FX M15"??!!!😂😂😂 or not. Hahahah

[@jbhk7977]

@@Xplawd You are so right my friend. FX is the only brand where flaws are called "points of interests for essential upgrades" but when another brand has issues they start bashing hahahaha

[@Reculse]

Get AGT Vulcan 3 HP...its simple and reliable gun.

[@Peter-tb3pq]

So so you’re going to judge a gun by your issues. Did you overfill the gun ever .

[@Peter-tb3pq]

So so you’re going to judge a gun by your issues. Did you overfill the gun ever . And I also agree that you cannot charge it any of these guns by the short little crappy review. These guys get paid a lie

[@janrobertbos]

...NICE!!!😀

[@HarryRaykage]

Huuuu coming man😅

[@arkaroy7531]

😮 marksman.

[@amazingairguns6350]

I would think that any honest person with a channel they want to keep and have people know that they’re honest would run from FX right now, if they weren’t being paid Ricky

[@shooter1721]

What’s your zip code ….. Arizona maybe ???

[@Peter-tb3pq]

And now that company is in such extreme financial trouble. If they haven’t filed bankruptcy yet I wouldn’t know why. The guns of auburn flops everything they’ve made, since the impact has been low sales. There’s a reason for that wreck. People have bought those guns with the Promise because the things you said on extreme accuracy and those guns never delivered. If you watch arrow, Hunter Girard, he shows you the 3 inch group his brand new DRS pro shoots and he’ll tell you why it’s a good group. Which is a joke these PRS guys that bought those are rifles it safe to say there’s gonna be a class action lawsuit.

[@KINGBREAKBARREL]

This guy can do the same thing using a umarex fusion 2😂😂

[@JerimyCarter-gi9pk]

I don't know.I still think I like the hubin k1 more.

[@amazingairguns6350]

Over the years air gun nation has been paid to take down. Any negativity about FX products people feel that there is nowhere for them to go to get the issues taken care of with the product they bought that is not what they saw it doing on FX videos, I think that this would be a great time to have a class action lawsuit. Because FX has not delivered. Their barrels are the worst going wreck and you know it. I have fixed those barrels. I will not do another barrel I had guys asking me to do the barrels. I’m gonna have to charge them 600 bucks to fix an FX liner. I told him just go get another barrel and I’ll machine that’s what we did. We put CZ barrels on their guns and they became half inch to three-quarter inch groups at 100 yards every time no flyers.

[@shooter1721]

@@amazingairguns6350 I agree about the CZ barrels they are great . But I shoot FX liners and do not have that problem .

[@amazingairguns6350]

@@shooter1721 if you say you didn’t, but I have to believe you I’ve seen you shoot those guns. But here’s a fact Brett just really pissed me off. I watch a video Matt Dobre with his panthera one year review. Watch the video look at the group. Years ago he showed it to be a quarter inch. It really pissed me off rick. And then I watched air, Hunter, Girard, DRS, pro precision and accuracy right. Don’t know if you watched it but watch that video when you were going to see why I have said the things I’ve said Rick. That gun shot 2 inch and a half groups with a 1 inch spread between them and he said that that was great why because he got 10 and one whole and three in another group, is that great to me that’s not am I asking too much for me it’s what Matt said I shouldn’t be looking for Matt and his video says don’t look for precision look for the inch and a half cup. It’s better. Rick just watched the videos and you’ll see what I’m talking about. You don’t have to go and say anything about these guns. And you certainly don’t ever have to tell me even if you feel the way I do that you do feel that way about the guns. And I get it you’re reviewing airguns it’s just a lot of shit lies going around there’s big money here Rick. And I don’t think you ever lied. I cannot say that I ever saw you lie.

[@shooter1721]

@@amazingairguns6350 I’ve heard complaints about a lot of guns through 10 yrs of doing this. I do care and listen to as many people as possible. If there is truth to it I will look into it .

[@amazingairguns6350]

There may not be an FX by next year because their stuff still isn’t selling. Your responsibility to the people that watch your videos and buy guns because of what they see is to tell them the truth rick. And by telling them the truth if I were you, I wouldn’t do any more FX reviews until that company is solid and I really don’t see that happening. They have taken too hard to hit from the junk. They make nobody’s buying the DRS pro. Nobody’s buying the maverick. Nobody’s buying the dynamic. Nobody’s buying the panthera all flops. But if you look at AAA, they’re skyrocketing. They should be there the world champions, right Rick Dave 12 years in a row now at the covered in Utah BS competition they destroyed F X, and their junk.

[@stedyone1090]

Low shot count 😮

[@JulianaCooper-m1f]

When will you be shooting the bin tech MCAR 1000 yard air rifle. That gun fills to 7000 psi 4500 regulated will shoot a 310 grain 457 slug at 1185 FPS 5 inch group at 800 yards. I very much doubt you’ll ever review that since her in the pocket of f(x).

[@shooter1721]

@@JulianaCooper-m1f Ha ha ha ha if you only knew what you are talking about . You assume way too much

[@JulianaCooper-m1f]

@@shooter1721 Well, that’s what you’re here for explain that to me.

[@JulianaCooper-m1f]

@@shooter1721 you do know there’s videos of that gun out there shooting you do know that right. And that gun is in its infancy it just came up so I doubt very much that the person who is shooting that gun test at a lot of different ammo so we’re going to see just how accurate that gun is and if you’re saying that 950 FPS is the mark you’re saying that because that’s all FX can do. The true innovator in the airgun market now is China AEA and huben. Have made the best products on the planet. You have no idea who my daddy is. My daddy knows more than any of you morons you’re just a guy who put the gun and a bunch of shoes that you don’t know anything about internals so you calling anything out you’re a joke.

[@shooter1721]

@@JulianaCooper-m1f I sent you another reply.

[@AaronHarbin-h5b]

We can,t tell what the numbers are

[@Peter-tb3pq]

You made the comment to a 10-year-old just own up to it.

[@shooter1721]

@@Peter-tb3pq Where and when ?

[@User65400]

Привет из России! У нас L2 стоит 2400$ в заводском исполнении.

[@amazingairguns6350]

Here’s a fact fick FX pays anybody who will make contact for them. Why because the more guns that are seeing all over KZbin the more people who don’t shoot airguns well think that they are so great that everybody wants them right Rick. And the fact that these creators of content lying about the accuracy and facts doesn’t care they’re happy with that. These guys will lie to do anything to get paid. Now that’s a fact rec because if you watch Matt dubber from four years ago where he shows a quarter inch group at 100 yards with slugs and you watch his one year with a panthera where the gun at 30 yards is shooting an inch and a half group, you tell me what the truth is Rick

[@amazingairguns6350]

Here’s a fact wreck. FX pays anybody who will make contact for them. Why because the more guns that are seeing all over KZbin the more people who don’t shoot airguns well think that they are so great that everybody wants them right Rick. And the fact that these creators of content lying about the accuracy and facts doesn’t care they’re happy with that. These guys will lie to do anything to get paid. Now that’s a fact rec because if you watch Matt dubber from four years ago where he shows a quarter inch group at 100 yards with slugs and you watch his one year with a panthera where the gun at 30 yards is shooting an inch and a half group, you tell me what the truth is Rick

[@JulianaCooper-m1f]

Rick remember the comment you made about the MCAR. Because next year we’re gonna be revisiting this and my 10 year old little girl I’m gonna be doing a video on you and how wrong you are. My dad warned me about people like you.

[@shooter1721]

@@JulianaCooper-m1f you got me mixed up with someone else . I didn’t talk about the MCAR at all . I hope you get things sorted out. I have nothing against the MCAR at all. And I am no longer sponsored by FX . You assumed way too much. Know the facts before you comment.

[@Peter-tb3pq]

You told a 10-year-old if you only knew what you were talking about ha ha ha you assume way too much to a child

[@shooter1721]

@@Peter-tb3pq yeah like I’m gonna believe you that it was a child. I think we all know who it is and it’s not a child. Just give up now Peter you’re trying to create drama out of nothing.

[@azajuegapro7667]

Súper tiro

[@Peter-tb3pq]

You made that comment to a 10-year-old. Explain it Rick explain what you meant about the MCA are calling the kid delusional answer or this is gonna explode like you’re not gonna believe you’re beating up on a 10-year-old.

[@shooter1721]

@@Peter-tb3pq Where ?

[@Peter-tb3pq]

@@shooter1721 Juliana about mcar

[@Peter-tb3pq]

You made a comment now explain your comment to her

[@Peter-tb3pq]

You made a comment now explain your comment to her

[@shooter1721]

@@Peter-tb3pq where

[@amazingairguns6350]

Why don’t you tell people about act USA is being closed because I have asked lost $6 million last year because nobody’s buying their junk

[@shooter1721]

Pure hater it’s a shame .

[@amazingairguns6350]

You should do a video on howAEA a relatively new company is destroying with their designs with their on believable market leading advancements 7000 fill pressure. Then being able to shoot a 319 grain slug 1145 FPS and sub ammo weigh at 800 yards Rick. Icy up north airgunner is trying to show how FX our guns can shoot long-distance that is the farthest thing from the truth. It’s all smoke and mirrors. 900 foot pounds of energy that MCAR max FX 35 CAL 200.fpe . You made the comment about the gun already that is not good in so many words, right Rick you’re gonna eat your words . And a fax then gonna make it another year if they’re lucky why don’t you do a show on how their guns didn’t sell in a cost him $6 million in the hole that they’re blaming on FX USA.

[@ErickvdK]

Didn't understand one word of this novel...😮

[@amazingairguns6350]

No that gun you’re reviewing right now Leah’s 2 that’s a good gun. It’s accurate with pellets, and not too bad with slugs either. But a really good power out of it it’s weakness is it valve system and the plastic parts. You will never get real power out of it. You’ll get average power. So for how much three grand invested in that gun, you get the power of a demon chief. Yeah, I’m not seeing a wreck. I’m not seeing the value to the performance and I’m certainly not seeing the value to the performance with an FX product, and if you look, there’s new comments truthful about FXB in the bottom of the barrel everywhere you look now Rick it’s come around the truth is coming out the only way for people to be able to judge better what products are good for them is for affects to go away because they’re corrupt way of paying everybody to put contacts out on KZbin to make it look like they’re so good that everybody wants them that’s got to go away. It’s all ally for profit. Of course it’s a corporation. What do you expect. I don’t know if you know how a corporation works wreck. I don’t think you do. Whatever is good for the corporation and that is it lied she beg steal whatever you have to do as long as it helps the corporation that’s what’s going to be done.

[@deaczorz]

Not doing papper = useless shill review

[@shooter1721]

@@deaczorz oh it’s paper keyboard warrior …..didn’t shoot paper so the gun isn’t accurate ….so let’s hide the shots on painted steel ….get out of here with that nonsense.

[@deaczorz]

@@shooter1721 yea yea cant hide anything on paper so why not do it? takes you 5 mins to do a set, unless you need to cherry pick :D

[@Peter-tb3pq]

Here is how I see it from watching you on your videos. You constantly and consistently always rave about FX. I’ve even watched you shoot distances that make them look good like that all the yard you did. You say it’s 50 bullshit I’m: 30 where is shot at their ears of that groundhog right. You did that to make it look like the gun was very accurate, but when you got it out to honored that poorly made air rifle by FX shot a 3 inch group. But you say you already put it in peoples minds that a shot great at that 30 there’s a lot of games you play rec. And you do that so you can get the pay from that company. Why do you think you don’t have the subscribers? Why is that Ricch people see what you do. I watch to do a review on the Diana bull pup they Hatin flash pop and the wildcat. The Hatsan extremely annihilated the FX groups. So what did you do you kept shooting it till it went off the regulator to make it look like a big group right wreck now that subliminal and some of the mind even though you said, you shut it off the rack at what point takeoff the reg. And then at the end of the video, it became a promotional video for FX. Even though I got slaughtered by the Hatsan. That’s because you get paid to live Rick. I can’t wait to see your comment of this your reply, and if you don’t reply, everything I said is true.

[@shooter1721]

Nothing you said is removed true not even close . You are a delusional keyboard warrior. I feel sorry for you. I hope life gets better for you 👊

[@Peter-tb3pq]

@@shooter1721 so instead of answering questions, you insult all right that’s that’s the best you can do Rick. It’s still leaves everything out that I just said you that you’re running from now you can insult and say whatever you want but everything I said is a fact.

[@shooter1721]

@@Peter-tb3pq like I said delusional no facts . You are the one that accused me with lies. Hang in there

[@fabiosantos8591]

This rifle is not worth the price it has.

[@scinner28]

Why not? TBH .EAE/Bin tec do better semi auto?Western airguns do better???Maybe ?The rattler .sidewinder..did you look at the price??Bin Tec/AEA much cheaper yes..Western airguns in the Netherland much more expensive then Edgun.So why to expensive ???I want to learn..We talk about semi auto yeah?

[@gbitencourt]

At least it's not your usual overpriced side lever gun

[@hypno18s]

@@gbitencourt True...... seriously how can all these company's sell these things at those prices like damn they take less engineering then the semi and full autos but cost way way more.

[@3Dima]

The rifle worth money you ready to pay for it. 🤷‍♂

[@JulianaCooper-m1f]

A gun that advanced you will keep hidden from your channel. Do you want to shoot that old design junk of a fx . The barrels will not allow you to shoot over 950 FPS accurately because they have a choke in the poorly made. DMCAR has a heavy bull barrel.

[@shooter1721]

@@JulianaCooper-m1f I hear only very good things about it . Why did you mention FX ??? This channel has a lot of other guns ? Nothing wrong with the MCAR just don’t have one yet ?

[@FoxMurder22]

Ребята,пора бы уже усвоить истину-лучшее оружие делают в России!

[@3Dima]

У них Л2 стоит как ФХ у нас. Действительно, слегка дороговато. Но, во-первых, аналогов у винтовки, по сумме характеристик, действительно нет. Опять же, если пользователь готов потратить сумму и купить Л2, значит она стоит этих денег. Так понимаю, что особых проблем с отсутствием спроса нет. Опять же, для них это немного другие деньги.

[@amazingairguns6350]

And here’s another thing about working pressures 1700 psi 2000 psi is not enough to get real accuracy out of slugs. My K-1 has been set up for a year and a half now shooting 1150 FPS and it’s 22 caliber using 40 grain slugs. I should under a half inch rack is that just a lock rack? Of course I laughed and polish the barrel, like I always do but how many half inch when the gun started out it was under an inch it was 7/8 of an inch, which is still great. This is the fabric you said what that I don’t know what I’m talking about. Let me tell you a fact , three years ago, I said the pressures have to go off wreck because it more duplicate a firearm, the higher, the pressure, the harder the smack duplicating fire arm pressures much better than low pressure. My 10-year-old kid knows that why don’t you

[@amazingairguns6350]

Over the years air gun nation has been paid to take down. Any negativity about FX products people feel that there is nowhere for them to go to get the issues taken care of with the product they bought that is not what they saw it doing on FX videos, I think that this would be a great time to have a class action lawsuit. Because FX has not delivered. Their barrels are the worst going wreck and you know it. I have fixed those barrels. I will not do another barrel I had guys asking me to do the barrels. I’m gonna have to charge them 600 bucks to fix an FX liner. I told him just go get another barrel and I’ll machine that’s what we did. We put CZ barrels on their guns and they became half inch to three-quarter inch groups at 100 yards every time no flyers.

[@Peter-tb3pq]

You told a 10-year-old if you only knew what you were talking about ha ha ha you assume way too much to a child

[@amazingairguns6350]

No that gun you’re reviewing right now Leah’s 2 that’s a good gun. It’s accurate with pellets, and not too bad with slugs either. But a really good power out of it it’s weakness is it valve system and the plastic parts. You will never get real power out of it. You’ll get average power. So for how much three grand invested in that gun, you get the power of a demon chief. Yeah, I’m not seeing a wreck. I’m not seeing the value to the performance and I’m certainly not seeing the value to the performance with an FX product, and if you look, there’s new comments truthful about FXB in the bottom of the barrel everywhere you look now Rick it’s come around the truth is coming out the only way for people to be able to judge better what products are good for them is for affects to go away because they’re corrupt way of paying everybody to put contacts out on KZbin to make it look like they’re so good that everybody wants them that’s got to go away. It’s all ally for profit. Of course it’s a corporation. What do you expect. I don’t know if you know how a corporation works wreck. I don’t think you do. Whatever is good for the corporation and that is it lied she beg steal whatever you have to do as long as it helps the corporation that’s what’s going to be done.

[@amazingairguns6350]

You should do a video on howAEA a relatively new company is destroying with their designs with their on believable market leading advancements 7000 fill pressure. Then being able to shoot a 319 grain slug 1145 FPS and sub ammo weigh at 800 yards Rick. Icy up north airgunner is trying to show how FX our guns can shoot long-distance that is the farthest thing from the truth. It’s all smoke and mirrors. 900 foot pounds of energy that MCAR max FX 35 CAL 200.fpe . You made the comment about the gun already that is not good in so many words, right Rick you’re gonna eat your words . And a fax then gonna make it another year if they’re lucky why don’t you do a show on how their guns didn’t sell in a cost him $6 million in the hole that they’re blaming on FX USA

[@shooter1721]

You are beyond delusional …..that’s for sure . You hate Fx so much you are blind to the truth. I’m not going to eat any words because I have no beef with AEA at all kinda weird you have your try hard pants to try and start something here . I wonder why that would be ?