ShopSabre CNC - Plasma Control Functionality

[@edanfultz]

Great video! Very informative with simplicity. I would like to see a "trace" video from the cardboard as mentioned.

[@shopsabre]

Thanks for the feedback and for watching!!

[@WhirlyWheelBirdFeeder-ts1lr]

What program do you use to put a path on it? Or is it built in the the machine software

[@marvinons1863]

Shopsaber thank you for the support ,it was really helpfull

[@shopsabre]

Glad we could help. Thank you!

[@edanfultz]

Best video to date!

[@danielarriaga5716]

You talk about all the setting but how do you use them. For instance how do you set the fast home setting? Or how do you set the fee rate for circles only and still have fast for line cuts?

[@shopsabre]

This is handled in your ProNest LT software or you adjust the feed rate by material in the material library

[@danielarriaga5716]

So do you have a video on how to trace, mark points (what points to mark), export, tool path, export and import back and cut it. Is that all done on the screen you were on or in enroute????

[@shopsabre]

Yes the entire process is done on the screen, the manual has a step by step direction on how to do this or you can call support and they will walk you through it.

[@PerfectEtchTx]

I'm having the same issues w/ my 5 x 5' table. Its basically new, but it recently went through an upgrade via Burn Tables that took 18 months. I have zero confidence in the table, and I can't seem to cut out a part.. Is anyone else having similar issues? has anyone else tried Dustin's recommendation on the CandCNC product to resolve the issues?

[@shopsabre]

Hello there, if you're a ShopSabre customer you have access to our technical support team who can assist. Reach out to them. We've got incredibly knowledgeable, Minnesota based support staff. That said, we do not build a 5x5 table so we suspect this is not a ShopSabre table.

[@marvinons1863]

hi my name is Marvin .i work for a company caled SIB SIGNS & DESIGNS, we purchesed a shopsaber sidekick 10. somethimes the Z doesn't go down over the material what could be the problem . we calles a tech Jeff ad Shopsaber but this issue still accurse

[@shopsabre]

Our techs are not on here, so it won’t get any exposure. Please give tech support a call back and ask for Logan or Ben. They will make sure you get taken care of. Thank you

[@nelsonvelez8300]

When I execute a program it does it well but the next program, being the same, it comes out 3 mm offset

[@shopsabre]

You can contact our tech support line, they will be able to help you with this issue.

[@n3o30]

What about aligning a skewed plate?

[@shopsabre]

We do have the ability to reference multiple points to help you set a skewed plate.

[@danielarriaga5716]

So how do you load setting for load sheet? You talk about it but don’t show how it’s done.

[@shopsabre]

The controller comes pre-loaded, if you need to create something outside of the normal Hypertherm settings you go into the setting and click add and then fill out the questions.