Short Shots EP1 : Lubing Your Pellets & FX Javelin (Exciting News)

[@robertpiontkowski2164]

Yes !!! More short shots !!! Useful information!!

[@budfarkus]

Yes short shots ! Thank you Joe

[@markbostic4706]

Thank you Joe, Yes on the short shot

[@simonnoble7589]

greetings from England , enjoyed the show .. cheers Simon ..... yes shorts shots

[@kingfishphill4120]

( Very good information JOE thanks 🎯 )

[@EdBraunbeck]

Yes to short shots 🏁

[@Camera1931-p5v]

Great information as usual thanks!

[@frankcross2297]

Thumbs up on the short shots.

[@kingfishphill4120]

Short shots yes

[@paulgroth3345]

Short shot yes. Even little bits of information are useful like change in your pocket.

[@airmojo]

I've been using Krytec bicycle chain wax lubricant on my pellets for many years for my spring piston airguns... it's important to wash your pellets of the residue first... I dump a tin a pellets in a screen strainer, rinse in warm water, add a couple drops of Dawn dish washing soap, scrub them with an old soft toothbrush under running water... dump them onto an old towel in a flat baking pan, dry the excess moisture off, then dump them into to pan... let them air dry, or use a hair dryer to dry them completely... dump the pellets in a plastic tupperware type container, spray a few drops (I still have a few cans of the aerosol Krytec), put the plastic lid on, and swish the pellets around... then dump them a different container to dry completely, then put them back in the pellet tin (I wipe it out clean before hand), and label the tin as being "Kryteced". The lubed pellets work well, and keep the barrel fairly clean... from what I can tell. I only have one PCP, a Career III 707 carbine... I use STP "One Lube" on those pellets, using the same process as above. It took me longer than 3 minutes to type all that !

[@briangipperich1933]

Yes these are great

[@rickrazz7136]

Love the short shots 👍

[@AirGunScientist]

yeah we gotta do some more, we have some really good ones lined up

[@garyeyser3949]

Yes, I loved it!!!! Quick and to the point.

[@justinstevens2032]

Shortshots good.

[@nickmeinert6255]

short shots very good

[@ResidentialRepairs]

Love the short shots and that Alkin compressor you sold me is working out great.

[@AnthraxVX]

i think your autocorrect did somethin there ;) but nice, alkin compressors are so nice, im jealous :D

[@ResidentialRepairs]

@@AnthraxVX Thanks for pointing that out.

[@Jeeper1378]

I spray one spray in a plastic sandwich bag. Dump tin in the bag and massage around, dump back in tin, done.

[@jefftencate4826]

Short shots, no Joe! Like the longer version. Thank you, And keep up the good work👍🏻

[@harveywhalen239]

Yes short shots. I always learn something. Or reminds me things I might overlook. Good idea. Thanks for in. I do have FXs plus more PCPs. 👍

[@briangray6372]

Yes

[@stevecotton7599]

yes please,more. and im loving my great white tank!

[@5198641202]

Very good ! Keep them coming

[@AirGunScientist]

Just uploaded another a few minutes ago, and saw these comments.

[@AnomadAlaska]

Short shots are perfect for my attention span.

[@AirGunScientist]

Just came out with another one a few moments ago.

[@hondocalrissian8532]

I noticed a box of NSA slugs on your display case. I believe those are shipped from the factory pre-lubed. Might be worth mentioning.

[@jesslanders1700]

I use a 100% silicone cloth and roll them around so there is no leftover, just a coating. Like the video

[@hollowell427]

on my big bore 457 i use Dupont Wax based chain lube. Spray them down on a cookie tray and let them dry. I havent tried lubing my 25 or 22's.

[@AirGunScientist]

Thanks for the tip!!!

[@MichaelJones-yl9gz]

Yes for short dhots

[@RobertLeeAtYT]

Hey Joe, glad youre posting more often. Yes, good idea for a series. Looking forward to slug reviews. Hopefully you’ll cover more than just the FX guns, but include slug performance in your other top selling rifles. Oh, might I suggest a lapel mic. better audio quality that way, not that it’s poor now.

[@AirGunScientist]

Check out our newest video on the new EdGun Leshiy2. It's being uploaded as I type this message.

[@JuanDoe1776]

It would have been nice to see how to lube the pellets.

[@AirGunScientist]

Thank you. Follow the directions in the video, just lube the foam in the lid, roll pellets, and dump. Repeat as necessary.

[@KevinWood44]

Hey, question....have you (or anybody else) ever lubed pellets/slugs with hBN? Or their bores? hBN is a great dry lube for bullets and rifle bores....curious if any airgunners have used it.

[@patrickpirelli7897]

I washed and lubed my pellets last night lube them with silicone spray lube tried the pellets today now I have to buy a new tin of pellets as the accuracy as gone south...never again will I lube them

[@AirGunScientist]

That is one of the reasons I say DON'T OVERLUBE (which is probably what you did, adding additional weight, and destabilizing.) That's why I said "It's better to NOT lube than to over-lube". You can probably clean off the excess by washing in detergent. Cheers

[@patrickpirelli7897]

@@AirGunScientistI've bought a fresh tin of jsb exacts and done nothing with them and my gun feels different and even sounds different and the pellets fit snugly in the barrel as apposed to the washed ones

[@peterago1082]

like the longer videos

[@AirGunScientist]

OK, That's feedback I'd like to know. We want to publish what YOU want to see. Thanks for the feedback, Joe

[@FreeFloridaAirgunner]

I understand about WD-40, but what about WD-Silicone?

[@AirGunScientist]

Silicone is fine, but not sure of what is WD-Silcone. Also, some silicone is like heavy grease. The viscosity will not be good for hammers, valves, etc., as it might cause stiction.

[@seyhmusaltunsoz3675]

👍

[@smokingunclefrank6037]

👍👍👍

[@johnparkerthegimpygardener]

Did you take my advice ? And yes it will help you be more regular .

[@limonjoardar909]

I want to buy a airgun ''Fx impact m3'' How price it.?

[@AirGunScientist]

Just call or order from www.TopGun-Airguns.com

[@greedygringoprospecting6941]

were do you shoot at i havent shot anything in a while ?

[@AirGunScientist]

I shoot a a few private places. Best luck to you.

[@dca7222]

Wd-40 contains lubricants but shouldn't be used more bc it's a petroleum based product and orings are rubber. Ballistol and silicone shock oil are my go to's for lubing.

[@AirGunScientist]

EXACTLY!!!

[@patrickpirelli7897]

Is silicone spray lube ok to use ???