(Short Version) Honda 50cc, 70cc, 90cc Semi Auto Engine Rebuild Part 1 of 3 "Short Block"

[@kostas8tar]

Wow !!!!!!!! What a fantastic job !!!!! Thank you very much !!!!! We appreciate it !!!!! Greetings from Greece 🇬🇷!!!!!

[@bigdonnie336]

Mini motor. Just want to thank you so much for posting the videos on the Honda engines. I recently purchased a 2003 Honda XR70R with a bad engine on it. It would not run. The foot crank was stripped out and could not crank it. I tore those engines down several years ago when my kids were small but it’s been a long time ago now. Thanks to you after finding you on the you tube videos I was able to get this transmission switched out and back together. I referred to your video several times through this operation. The videos were great and you have good working hands to put these engines together under your video camera. You do real good work in building engines. The motorcycle has been brought back to life and it looks good and runs perfectly now thanks to your video help.

[@dcxplant]

So happy I found this channel!! THANK YOU

[@dennisbrouns1920]

Cheers! This is better than the Haynes manual! Well done many thanks 🙏🏻

[@philippe165]

Just what I was looking for! Thank you very much, very well filmed and explained. I now feel a lot more confident rebuilding my k1 ct70, cheers

[@TheRealDogfart]

No doubt you get thousand of 'likes' but I wanted to tell you personally how helpful your videos have been to me. Mini Motor Man is my goto for CT70 know how. Thank you!

[@TS50ER]

I don't even own a Cub and enjoyed this superb, concise tutorial.

[@M1ST3RHYDE]

Thank you, your a good man for giving your time and description to us whom need it. My 1964 CA100 kickstart spindle broke and I'm trying to make a gather a shopping list and how to vids to minimize any untimely surprise's.

[@ghaziusa3172]

you are the best at explaining engine parts and assembly. i recommended your videos to my friends and everyone who asks me about engines. your channel is underrated. you deserve millions on subscribers.

[@danielnadj34]

Thank you very much my friend. This video helped my a lot!!! Greets from Germany

[@mikeb6431]

Excellent video! Just what I’ve been looking for. Thank you!

[@calegilley1792]

Your efforts are very well appreciated! This is by far, the most detailed and correct information on this subject. Your videos really boost confidence for a novice like myself. I have a genuine interest in small Honda engines and have really learned a lot from watching your videos! I am looking forward to other videos you have planned. Thanks from Virginia!

[@minimotorman5931]

Hey, my wife used to live in Arlington. It's been almost 20 years, but she still talks about memories and friends she had there. Anyway, glad you found it helpful, that's the purpose of these videos. One thing I find great about these engines is that even beginner mechanics can keep them running and make use of them.

[@ozarkdaredevils]

Amazing video I cant thank you enough , this series is what I needed.

[@anarchist78]

Thank you very much for all these detailed videos. Much appreciated

[@supulsaluka1513]

Very well explained. Thank you so much

[@stevem9144]

Thank you for posting this video, very informative and entertaining. I wish you had one for the CB175 engine as I about to attempt putting one of those back together.

[@TheJedsdead]

great video...thanks so much for the detail. I have a CT200 that I am trying to take apart. A little different, but most of the parts are similar. Really appreciate the video!!

[@dominicmccartan8427]

Brilliant explanation of rebuilding a little Honda engine and very helpful. I have a Chinese copy Z bike frame with a Honda C90 engine in it. Last year it went under water in the floods so I decided to give it a part restoration. I’ve powder coated loads of parts and the frame, along with painting the tank and forks. It’s looks great, now the engine which I’ve vapor blasted. I need to order some bearings and oil seals but I’m unsure of the year of the engine. I only have the engine number HA02E-1374452 with GB6 on the case too. Can you shed any light for me please as you seem super knowledgeable about these engines.

[@esmeben]

Excellent instructions

[@AdventuresWithNimby]

Great video! Better info! Ready to try and fix my shifting problem soon here.

[@fearnobeer9077]

Very clear and informative vid, thankyou sir!

[@adolfadolfvich3253]

Gut gemacht 👍! 🎥 👍

[@dinotravis9067]

Thanks for the video, it's help me alot

[@kapilsds7]

i had rebuild myself my dads old c90 1991 thanks for your video. replaced all oil seals , bearings, and rod,piston timing chain and wheels ect. i had order from ebay and aliexpress some tools. so my next try is Honda cd125. can you add some videos about CD125 benly.

[@abrahamx1]

Very very thank video, love videos :)

[@frankcaccamo3568]

Fantastic video. Thanks for thinking of us newbies 🍺🍺🍺🍺🍺💪💪💪💪💪🇦🇺🇦🇺🇦🇺🇦🇺🇦🇺

[@ViperViper6]

This video was EXCELLENT. I bought a used 2011 CRF50F and it clunks horribly shifting between gears, it is impossible to do smoothly like my yamaha... any idea what could be worn/broken that could be causing this I should look for? Thx

[@ДедМудрый-щ1я]

👏

[@Voydfun]

Thank you,sir!

[@chrissv650s9]

Hello,i have a kymco k pipe 50 and my semi clutch is acting weird. On a cold engine, i start an put it in 1st gear and the engine turns off, the bike wants to go drive, so i have to rev and then put it in gear, and keep reving till im driving. The clutch is ticking and when i slowly put it in 1st gear the ticking gets worse, then rev to prevent the engine turn off. Is seems the engine has to work hard and the bike wants to creep. Sorry for the bad English , im from the netherlands

[@barnycanuck6234]

At ~ 20:52 the green gasket seems to be blocking at least in part some of the openings in the cases.

[@minimotorman5931]

That area of the case is the crankcase vent tube and is supposed to be covered by that part of the gasket, so no problems there.

[@ayonrahman679]

I had a question. Did you use the old parts?

[@eltallerdechachin6711]

hello is motor honda c90????? saludos!!!

[@minimotorman5931]

Motor es para Chaly 50, pero proceso de ensamblaje C90 es mismo.

[@kapilsds7]

6,729 views but only 82 likes...............