Shorty Tail Kit | Interceptor 650 | Continental GT 650 | Royal Enfield Twins | Chopped Frame

[@Thatsunsetstrip]

Okay! first thing first! this channel and products are so underrated! Dayyammmmmmm, that's so clean and well fitted rear end! I'm getting interceptor now!

[@elijahroman170]

You all prolly dont give a shit but does any of you know of a trick to get back into an instagram account? I somehow lost my login password. I appreciate any tips you can give me!

[@jeromecade5140]

@Elijah Roman instablaster :)

[@MKDESIGNSINDIA]

Thank You for your appreciation .

[@BurtoniMotors]

I bought it a few weeks ago and will install it today. Video coming soon!

[@sukilvarshan1831]

How much it costs bro

[@Mark-wx1ho]

Have you installed it?

[@Thatsunsetstrip]

@@sukilvarshan1831 check their website mate! it's well briefed there!

[@BurtoniMotors]

Video is live here: kzbin.info/www/bejne/bJewnGSOZrGqbck

[@jamesvasser2941]

That’s slick as hell! Looks really nice with either seat setup.

[@koujimoreno]

So I decided to try this mod to my bike with the XL Shorty Kit which is the same size as the stock seat. It requires cutting closer to the end of the frame because the male ends (of the shorty kit) that fits into the female slots (of the frame) are too large. In order to get the seat to line up with the end of the tail, you have to cut further in where the pipe increases in diameter. Only problem is, the piece that's suppose to slot in is too short width wise and the slot isn't big enough. Now I'm stuck trying to figure out what to do next. Probably going to go to a metal fab shop and have them recreate the piece with the appropriate length. Also, maybe I missed it, but I thought the shorty kit piece was metal, it's not, it's some kind of carbon fiber or hard plastic. You may want to avoid buying this.

[@MKDESIGNSINDIA]

Mentioned on the website, its Composite Fiber . Its high strength. Needs to be cut at 35 mm from the frame starting .

[@modusop8]

That is serious Im gonna do my GT as soon as the kit arrives !!!!

[@HOOKFISHINGMODES]

Nice job guys, good set up

[@DevRajput072]

Great work👍

[@amielterence]

Lovely stuff👍🏽

[@rammani7170]

I’m buying this next ❤

[@chunkyofc3132]

Can we use other tail lamps insted of the stip ones?

[@akshatrockport]

But wouldn't the structurally integrity of the chassis get affected?

[@tikiortaka]

It would. This suits a show bike or one you'd use for shorter rides. Long time owners wouldn't cut frames obviously.

[@albertobenito4307]

It wouldn't, because he's cutting the sub-chassis, not the chassis

[@ReevesTop]

He cut the back of the subframe not the frame that is connected to the motor! No structural rigidity is affected!

[@stevenguy2630]

@@tikiortaka no it wouldn’t. It’s the subframe. Has no structural significance whatsoever.

[@jonathanbonnett9456]

Surely weld the new hoop???

[@bandameedivishwateja4216]

How did u install the contential clip-on handle to the interseptor ... It looks frekin awesome 🔥🔥🔥🔥🔥🔥🔥🔥🔥

[@urveshkoli3918]

Why i cant modified my hunter 350 like this

[@sagarnegi9767]

Seat here and on the site are 2 different seats. Also cannot find the tapered tail kit on the site. I can see it on the images but not on the site.

[@MKDESIGNSINDIA]

One of the seats is RE Single seat and cowl , other is a custom seat . Tapered Kit is available too . Click on the product link , choose Model and then type of shorty Tail kit you want . We have 3 options available - Small , XL or tapered .

[@navjot_sidhu]

Professional work

[@DarthVader-ei3ju]

Will this mod void warranty?

[@som_visual_artes]

Nice! That tire from the video?

[@dj_gabru]

Which tyres are these.?? it has got same grip tires on both end.

[@gamaocares6264]

can you carry 1 more person with the brat seat or whit the short tail is not posible anymore ?

[@MKDESIGNSINDIA]

We have shorty Tail Kit XL , which is same length as stock seat . can use Brat seat XL along with it and then a pillion can sit . Shorty Tail Kit small is 100 mm shorter than stock seat and is for Rider only .

[@armanbakhshi4909]

I dont wanna chop my chasis…any other method

[@Ambiguousss]

Loved it!

[@drinksgeek]

Hey mate, great job. I've recently purchased your tail tidy kit. Can you please provide a link to the brakelight system you recommend using with it. Im based in NZ. Cheers

[@MKDESIGNSINDIA]

LED Strip Light is included with the kit , which has brake light and indicator system both. additionally for break light, can check this too- mkdesignsindia.com/product/led-tail-light-round/. and for turn signals - mkdesignsindia.com/product/turn-signals/

[@gahanfrost6318]

Hi, what tires and sizes are mounded on that green 650 ? Looks great!

[@The3dsGeek]

That's Pirelli Scorpion trail II 150/70 R18 Rear, 100/90 R18 Front. Costs around 14000 INR or 200USD

[@Rahul75559]

Harris Performance: Are we a joke to you?

[@KangSupreme]

What?

[@ihaveakrazyheart]

Hey mk designs a quick question can i bolt back the oem rear mud flap with this kit?! Just the metal part of rear mud flap

[@MKDESIGNSINDIA]

No , stock fender wont fit . but we have shorty tail kit fenders for the kit .

[@xxhotelcrazyxx]

Does this kit come with the rear beans light? If not where did you get the light from to pair with the frame kit

[@DrLongSchIong]

what is the name of the tool used to cut the frame?

[@nithintanneeru2249]

Hey can i pop in my dual seat occasionally on this frame , can it take on the pillions weight.

[@MKDESIGNSINDIA]

Use Shorty Tail Kit XL for Dual seat .

[@enfieldrunners]

No handgloves, buffing with part 4" cutting wheel.. typical indian style😎..

[@Wachuko-1]

Nah... not specific to India, that is globally acceptable home shop diy approach, he he he 😎.

[@aliston5028]

Can two ppl sear after this mode with normal seat without the couplar?

[@MKDESIGNSINDIA]

For that use Shorty tail Kit XL . Stock dual seat is compatible with it .

[@Wachuko-1]

I ordered the kit... not sure when I will install it (if I ever do). I just wanted to have the option to do so and have the kit ready if I decided to make this mod. But I question that I have is on those saddlebag/panniers supports. Where are those from? Who makes those?

[@Mark-wx1ho]

Would this pass a UK MOT with those indicators? If so, count me in.

[@Mark-wx1ho]

Apparently not. Distance between rear indicators has to be a minimum of 180mm. That whole rear LED measures in at 170mm in total. Bugger.

[@forrealCJ]

Ayo this vid is so underrated. Where to get those from?❤️😭

[@BurtoniMotors]

MK Designs... The people who made this video, make the product.

[@lechefski]

If I install the xl version that fits the original passenger seat, can I still have a passenger ride?

[@MKDESIGNSINDIA]

Yes, the weight limit for passenger will be 75kg

[@lechefski]

@@MKDESIGNSINDIA Excellent, thanks for responding to me!

[@GoodBalak]

What happens when it gets rainy? Thought about the wet road and tyres?

[@MKDESIGNSINDIA]

we have Shorty Kit Fender for that.

[@cruffin8790]

I really like the work u guys ship to the US? I def need a seat from u guys.

[@MKDESIGNSINDIA]

Yes we ship worldwide .

[@naponongmaithem5767]

Which tyre is it at the rear?

[@underfluked3832]

Hi, does this kit come with the lights? I checked the website but it isn’t explicitly stated, from what I could see. If not, could you link the light kit please?

[@Lquifi780]

It does come w it now

[@MKDESIGNSINDIA]

Comes with LED Strip Light .

[@buster8847]

Can you ship to UK?

[@Fregripe]

It comes with the led light?

[@MKDESIGNSINDIA]

Yes

[@tooturntup1314]

bro will the stock seat fits after chopped

[@MKDESIGNSINDIA]

Yes you can use the stock dual seat with the XL Shorty kit.

[@luckymutum9227]

Can two people fit on this ?

[@DarellTan]

Are they included the LED strip light on the kit?

[@MKDESIGNSINDIA]

yes , LED Strip light is included in the kit

[@tristandavies4381]

Hey guys, in the instruction, there is no mention of the wiring and the wiring doesn’t come pre-wired. Any chance you show us how that’s done? Maybe even just a photo of it wired so we can see which colours go where? This is a critical part of the installation and nowhere to be seen in the video.

[@MKDESIGNSINDIA]

kzbin.info/www/bejne/jpLaaGClm9aDaNUsi=rzVKBbE_ycl-xCqg We have its installation video too.

[@haorokchamdevi3735]

Where can i get the interceptor tank grip ? Can u pliz send me the link.

[@strklet]

Please make a video for shorty tail kit XL

[@GettingTheWordOutChannel]

Ok so maybe I’m naive or just need help to understand. How does this effect the integrity of the frame? I could see cutting the cross bar but it’s just the extension piece of the frame. If you’ve ridden this bike (which I own and do) the rider is positioned so far forward from this area and never comes in contact. Again I just want someone to help me understand this. I may order it but have not yet.

[@stevenguy2630]

It won’t affect the structural integrity at all. Of course you’ll never be able to ride two up again, but who cares

[@livfullthrottle]

@@stevenguy2630 pillion cares 🤣🤣

[@hawkrider88]

@@livfullthrottle With that seat...unless she REALLY loves you, the pillion probably won't want a second ride anyway.

[@lechefski]

@@stevenguy2630 Why not? What if you JB weld the seam?

[@kunalpachpund7425]

Can 2 people seat

[@hawkrider88]

Dang....this is a great product. The rear end of these bikes has always bothered me. REALLY bothered me. Whomever came up with this product gets kudos from me and I hope he makes a lot of money. PS: I just found out this is not steel. A bit of a bummer but OK as long as it's make of a heavyweight product of some sort and looks good close up.

[@MKDESIGNSINDIA]

Thank You for your appreciation . Its made of Composite fiber and has high strength .

[@khaleelahmed3385]

It looks like a simple yet elegant improvement but it doesn't follow the seat guidelines of ARAI, so do watch out for cops!!

[@RosZiOviC]

Which tyres?

[@abhimanuetj1830]

It's all fun and game's until it that's to rain.....and you check your back 🥲

[@MKDESIGNSINDIA]

Use a tyre Hugger or fender along with it . That will help .

[@vivekpanchmatiya8531]

Whats the handlebar?

[@danilopchen]

Hello,great job on the tail tidy, just wanted to know if this mod will fit the older 535 gt. If it does then , how can I buy it from you, please let me know, thanks 👍

[@MKDESIGNSINDIA]

We have a different product for GT535 . Check this link - mkdesignsindia.com/product/shorty-535/

[@DB__21]

Can it do the same work for Gt535?

[@MKDESIGNSINDIA]

Yes you can , here is the product link - mkdesignsindia.com/product/shorty-535/

[@jamesburns8968]

Would like to order

[@Castlebuilderarchitect]

Can we keep stock gt seats on this mod

[@GetYossedLol]

no bro it wont fit

[@MKDESIGNSINDIA]

Yes , Single seat cowl of Royal Enfield is compatible with Shorty Kit small . For stock dual seat , use shorty Kit XL

[@enderzebak2863]

@@MKDESIGNSINDIA will you guys make a medium length kit? which is not as short as this but not long as the xl version

[@66arnikraut37]

Can 2 people sit on the bike after installing the kit

[@MKDESIGNSINDIA]

No not on the Small version but you can use the stock dual seat with the XL Shorty kit.

[@DanishShaikh-es5fh]

Do we get the LED strip with the package? Also, can we cut the frame at any distance or just right till where it is shown in the video?

[@karankashyap9102]

Light is included

[@SpringXDValo]

What tail light is that?

[@MKDESIGNSINDIA]

That is a LED Tail light strip , included in the kit.

[@phaneendramulagala9287]

Can we use dual seat coul after installation of this kit

[@anuragmtr131]

dont think so

[@MKDESIGNSINDIA]

Yes , Use Shorty Tail Kit XL for using the Dual seat / Stock seat.

[@MKDESIGNSINDIA]

@@anuragmtr131 Yes , Use Shorty Tail Kit XL for using the Dual seat / Stock seat.

[@shawrmarolls]

The question here is not about structural integrity (We're Indians, let's just be Indians, we are into aesthetics). The real thing is, COPS ARE GONNA SCREW WITH YOU SO BAD AFTER THIS MOD. no chassis modification is allowed guys. you gotta take additional advanced permissions from ARAI to do 'stuff' to your vehicle. It's not like UK here. Be careful

[@hawkrider88]

Really? Cops actually look for "chassis modifications"? Would most police actually know what they are looking at? Glad we don't have anything like this here is the U.S.

[@buddhabob4168]

How/where do I get the full kit do do what you have done in this video ? Thanks

[@MKDESIGNSINDIA]

check link - mkdesignsindia.com/product/shorty-tail-kit

[@Born2BeSmart]

I want cowl seat full picture

[@AbhishekSingh-qz8gu]

Can this be installed without chopping the chassis

[@thecasualrider2668]

Obviously not. Thats why its called short tail, it becomes short after cutting

[@Strdyaftrnoon]

@@thecasualrider2668 I think he meant the light setup

[@santhoshrathod2062]

Bro...clipon handlebar tank ko touch nahi hora kya??

[@MKDESIGNSINDIA]

No

[@ourworld6848]

Fucked up the entire look of the bike

[@vishalbaba7137]

kaha remodling ka address bataye

[@swapnil321you]

The seat doesn't sit properly on the frame. There is visible uneven gap in-between. Otherwise, great upgrade!

[@eduardocordova1269]

Is this still enough space for a passenger?

[@MKDESIGNSINDIA]

No not on the Small version but you can use the stock dual seat with the XL Shorty kit.

[@batmandarkknight3850]

Where can we buy the light..?

[@MKDESIGNSINDIA]

it comes with the kit

[@ssislam786]

Anybody plz can tell me that how i get that LED tail light???

[@shawrmarolls]

look up their website

[@rolandwolfe7637]

Does the kit come with that tail light?

[@MKDESIGNSINDIA]

Yes , comes with LED Strip Light .

[@jayrajsander121]

Tell us about thos mirrors, guys at mk

[@The3dsGeek]

what is the material used? is it fully plastic/fiber? or metal?

[@ethan073]

Fiberglass hoop. other fittings are metal.

[@Petrolhead-qk4gm]

Amazing! such a video to watch!!

[@wasimakram4145]

meanwhile, in the rainy season, all the mud and water will splash at the back of you.

[@MKDESIGNSINDIA]

Add a shorty Kit fender to it for that .

[@jeanpooldelgado9111]

Hola estoy interesado en tener la pieza con envío hacia Arequipa - Perú! Como podrías ayudarme con el envío, podrían enviarlo

[@callamit100]

Now it does not vibrate😁😁

[@pedroigor5568]

Hi, do you sell this item? if so, what value? Send to Brazil?

[@MKDESIGNSINDIA]

Product link in description , Yes we ship to Brazil

[@Gearsandgrease]

You skip over the main part. Wiring the tail lights

[@MKDESIGNSINDIA]

Check here in detail - kzbin.info/www/bejne/jpLaaGClm9aDaNUsi=BX6FUlhH8HRLYtQZ

[@rmanusmare]

Indicators?

[@MKDESIGNSINDIA]

Comes with LED Strip Light which has all 3 functions - Brake , Stop and Turn signals .

[@pcr5306]

I want that for my bike!

[@vinayoruganti]

Sad to see the structural integrity of the frame being compromised for aesthetics. ☹️

[@mred7030]

i was waiting for the welder to start .

[@kumarprashant1110]

😲 काड डाला अब माड़ घड़ लगा या फिर बारिश में चला के बताना

[@D20kumar]

Finishing and design is not very symmetrical.. looks good but

[@abvlog8857]

Ek kami hai ek rear short fender bhi banaya bhout atcha hoga plz dont mind

[@MKDESIGNSINDIA]

Already made .

[@mr.wick1238]

Hey Brother Can I get the address?

[@BroZedd1]

I won't reccomend tampering with the original frame I'll prefer bolt on kits

[@humanfirst11]

How will someone shorten the frame with a bolt on kit?

[@BroZedd1]

@@humanfirst11 yeah right

[@humanfirst11]

@@BroZedd1 I was actually looking for a solution as I was planning to do it 😅

[@BroZedd1]

@@humanfirst11 don't do it , you'll ruin your bike , it is an irreversible process Go for slightly long aftermarket cafe racer seat ( a bit of compromise will save your chasis )

[@chillon2922X]

Shorten it by bolt on.. Hmm ;) Look at ducati monster tail. Everybody shorten it. Me too. No problem at all. And the frame from the gt 650 is way longer and looks very ugly. For me, the bike is only possible with a shorter frame. And when you cut it there, its not a problem technically.

[@samuraiwolf3669]

🙏❤️🙌👌

[@neeratiwari8895]

Bhai single seat kit kitne ka hai

[@YashGarg]

Check on RE website

[@The3dsGeek]

4500. Seat +Cowl

[@royalenfieldsalim1522]

Rajasthan auto centre Jaipur India my father shop 1949 royal Enfield

[@สุวิจักขณ์อุดมวรวัฒน์]

จะตัดไม่กาอะไรบิดบังล้อบ้างเหรอครับ

[@AbdulRaheem-yk1rf]

Pls Send me the link of tank pad

[@HemalathaS-nu5yx]

HORRIBLE PRODUCT AND HORRIBLE COMPANY!!! I got faulty product twice from these guys and the it’s definitely not my money or times worth. I had to send the faulty product back at my own expense and spend more on an already overpriced product. Any request for return or replacement was responded by a threat stating ‘return the product in original condition or forget the money’ and all these after sending them the pictures of faulty product immediately after being delivered.

[@MarcoRodriguez-fc8wj]

It Is Made out of plastic guys, MK should Let the customers know that

[@Wachuko-1]

Interesting... never even thought about asking what it was made from... I thought it was steel... Mine should be here in a couple of days...

[@Wachuko-1]

@@wpanik the MK is made out of fiberglass/resin. I have it. It is not made out of steel. Only the brackets that holds it to the bike and the bracket for the tag are made out of steel. Do not steer folks wrong please. It is a nice kit.

[@wpanik]

@@Wachuko-1 Well so it is…installed it yesterday and literally couldn't tell that it wasn't steel. Pretty impressive. Calling it "plastic" definitely isn't fair though. My frustrations came with the fact that the rear light isn't plug-n-play as it appears on the video and that there wasn't even a diagram explaining the wiring. So I had to figure all of that out before I could even splice on the old plug.

[@Wachuko-1]

@@wpanik yes. It is nicely made. Heavy feel that would I definitely not describe as plastic. That is why I made the clarification that is some sort of fiberglass resin with gel coat. It feels solid. Boat-building-like solid. Kit brings everything. But yes, you have to make the electrical install with the plug provided. I got the wiring diagram from the web... from a similar light sold on eBay that had the diagram. Then is was just a matter of matching to the factory harness. Not difficult, but time consuming. I have it all ready to go, but have not gotten the courage to cut the frame, lol. My plan is to make it so that I can switch back and forth between the short tail and the stock tail (for those times I want to use the bike on longer trips with luggage rack and saddlebags).

[@wpanik]

@@Wachuko-1 That's a great idea! Totally doable too since you don't have to weld the new piece in place. Yeah I definitely think the kit is worth the price, just would've like a *little* more direction.

[@carlosgooglemaps94]

Why throw money away??, you can easily make your own “shortie” with the rear loop you just chopped off as many already did!!

[@aurokris4182]

Lol yep 🤣

[@Wachuko-1]

Because the cost is not that high and everything is included. It was a no brainer for me. I place the order a few days ago. I might not use it, but in case I go this route, I have everything figured out as a kit. I do not even have to turn on the welder, or figure out a plate for relocating stuff... yeah, for what this cost shipped to the US, I would not bother trying to modify the stock item myself.

[@amzyvines]

Faltu bro y y to do all this things

[@DG85YT]

Put a sheet over the bike when your spraying grinding sparks everywhere ffs

[@bierlichen1]

Or not ffs.