Didn't fit your car because of the style, it fits others really well. This was a terrible and pointless review that actually proved that this could be a great replacement if you don't want to spend tons of money for something that does the same thing. Price doesn't equal value.
@dannyhampton5 ай бұрын
:,(
@ReSp3c7a2 жыл бұрын
No need to brake it ...
@F-rig Жыл бұрын
👍👍👍 Love the durability test.. 😂
@dredarko8174 Жыл бұрын
Had to subscribe when you said “everyone will know that your ga I mean that you didn’t spend enough money”
@dannyhampton Жыл бұрын
Glad you caught that 😅
@redeye2324 Жыл бұрын
🤣🤣
@bcoleman4135 ай бұрын
I'm not saying I'm gay but there will be signs
@leonardoluccisano5106 Жыл бұрын
I bought one of this for my GTI MK4, worked well until I reached 180km/h, then ,it flew away almost causing an incident. If you install one of these, make sure to put some extra screws and even though, not sure if it's worth
@_Volkhunter_ Жыл бұрын
You need to put support rods
@jhurlac761711 ай бұрын
i do quick check 360° everyday on my car before driving and weekly to make sure everything is good. Make it a habit
@JoyB258 ай бұрын
Same happened to mine I think you need tape also
@deporcali235 ай бұрын
I read maybe cris crossing the screws to add more stability to it … mine cracked at 80 mph the same day i installed it 🤦🏻♂️
@NoName-zi9qs16 сағат бұрын
180km/h is an accident waiting to happen.
@jmracing20103 жыл бұрын
I had the same one Disintegrated on the turnpike in doing 120
@dannyhampton3 жыл бұрын
Lol I bet. So flimsy
@t.b.5116 Жыл бұрын
I have mine for a few years now. You have to bolt them on with screws in both side you cant just leave it with the screws that it comes with thats why yours flew off.
@deporcali235 ай бұрын
@@t.b.5116 Can you elaborate on that lol … would appreciate it i just installed mine yesturday and after going 80 mph it broke from the middle and thats even reinforcing the middle with 1 screw ( im prob thinking maybe adding more screws in to lock it tight as possible ) ?
@deporcali235 ай бұрын
Mine at 80 mph the middle connecting piece broke 😂🤦🏻♂️ prob hit a small bump or pothole idk but thought it would last longer than that
@t.b.51165 ай бұрын
@@deporcali23 you have to lift the front of the car up then make holes (at least 8-10 ) throughout the bumper underneath the car. Then you have to bolt them on instead of just screwing it on the bumper. Once u install that it will never fly off on the highway or anywhere else! Idk if that helps
@garydeandeery2 жыл бұрын
Had mine on my rx8 fir 3 years now fitted the middle bit between the splash guard then the 2 end bits sat under the middle to help push up then rods so it don’t move still like it today but just the end wings can’t get level bend in a bit Now got new one and paint the front bit a different colour
@MrStasrock2 жыл бұрын
I just ordered same shit for my VW CC , well will see how it looks )
@BingimTV2 жыл бұрын
Bro, how does it look? I just ordered for my 2009 CC as well
@zeppie20023 ай бұрын
How a picture please!
@DeeMannMusic11 күн бұрын
Is it ABS?
@DELvEK4 күн бұрын
You dont even realize that wasnt even for you car at first and you analyzing data that are not even accurate + not even related to your lil change of the front head of the vehicule body.
@changzhouhonghangautoacces3616 Жыл бұрын
We produce this products. Have full kits, front lip, side skirt, rear spoiler, rear diffuser. For the purpose of protecting car body. On your side ,no need to buy universal lip, it's for cheap cars. You have a better choice for your car, If you have free time, I can introduce full body kit to you.
@YorumiTech5 ай бұрын
😮😮😮😮
@mfrfpv90792 жыл бұрын
It didn't follow the body line 😕
@angeloscirli8 күн бұрын
perchè comprare quelli economici ?
@alexferris72602 жыл бұрын
Why is your diff locked to 60/50😂
@RS6895 Жыл бұрын
Great job Danny hey bro I really like your calipers how’s look! what code of color is I love it!!
@bitchkilla2 жыл бұрын
It looks good to me . 🍚 is just an opinion 😎
@zamboanganbeatsАй бұрын
Dude just give it to a friend
@jeffflett9991 Жыл бұрын
Dang dude....got alil rage going on there...lol
@jewtubetruckers8 ай бұрын
You put the overlap over the middle splitter should of been on the bottom of the middle piece for a more contour look
@socksonfeet8125 Жыл бұрын
Thanks for the video, the front part looks too skinny for some bumpers like yours. It needs to be as wide as the parts on the side so you can fit it how you need to and have space to fit it further out or further in. Not very " universal" if its that skinny. Looks like I'll just make my own. I do like thats its flexible though, my car is already low and a splitter/lip will scrape on everything.
@raymondkhan27092 жыл бұрын
I think you bought the wrong size. It looks short on the wings.
@dannyhampton2 жыл бұрын
It's universal so no sizes
@raymondkhan27092 жыл бұрын
@@dannyhampton there are 2 or 3 kits. Universal does mean multi fit however check other units, the difference are width. Some cars are wider than others. In example, the wings should goto the end of the side ( towards the tire) this gives a property lip fitment n better finish result
@306_Zai2 жыл бұрын
It’s UNIVERSAL
@raymondkhan27092 жыл бұрын
@@306_Zai there are different sizes for the proper alignment/fitment. See product description. Normally the lip should extend to edge of the bumper (ie end to end)
@Solid_Snack5 ай бұрын
I used bricks too because i dont have a lift lol
@dannyhampton5 ай бұрын
I use bricks to pop the car up a little because jack it’s too low for jack.
@Solid_Snack5 ай бұрын
@@dannyhampton haha we both used it but for different reasons.. so did you decided to go with a different front splitter?
@logananderson29542 жыл бұрын
Yo dawg I absolutely love your ride
@dannyhampton2 жыл бұрын
Thanks man!
@tkh18454 ай бұрын
Leave the end caps on.. or give it away to a subscriber.. instead of breaking it
@TRILLIXOSA3 ай бұрын
Bro it’s cuz ur bumper looks like it has a spoiler 💀 on my car that lip looks good
@dannyhampton3 ай бұрын
It didn’t have anything
@hgrrdgz619 Жыл бұрын
I buy those pieces for my mustang 2015 it doesn’t fit
@josiahjalowiec4203 Жыл бұрын
Could you put it back on your car and wack a couple curbs?
@JustDaveslots Жыл бұрын
It looked good, just not on that car. If it was on a Honda or something. It would be nice. Kits don't look good on Audi.
@xProMvZ.4 ай бұрын
Dope video
@KkKk-px2le9 ай бұрын
A normal person would have drove the car and seen the durability before breaking it 🤔
@306_Zai2 жыл бұрын
Pretty strong shit
@Giova2774 Жыл бұрын
podrías hacerle lo mismo al Spoiler caro? quiero ver si soporta el maltrato
@brianamaez85052 жыл бұрын
Could've given it away.
@mtang652 жыл бұрын
Why do you need that piece? Doesn’t it add weigh to your ride?
@dannyhampton2 жыл бұрын
Solely for looks lol. Watch new vid to see the new one. Also cars wrapped now.
@Gdv.502 жыл бұрын
No, doesn’t even add more than a pound, won’t be a noticeable difference
@belligerent-irony Жыл бұрын
You know if your car was actually fast you wouldn't have to put stuff on it. Lmao
@dannyhampton Жыл бұрын
Turning Up The TTS! -Part 2 (All the POWER!) kzbin.info/www/bejne/gpOspHagjb-UnMU
@benjam2568 Жыл бұрын
Why the disrespect..😂you could of just not brake it and throw away
@rhijengabino1262 жыл бұрын
😂Title Video. I hate carbon fiber look!!!🤣🤣🤣
@florinel1812 жыл бұрын
Be thankful to KING JESUS for what you got !
@dannyhampton2 жыл бұрын
Always
@gatofelix2112 жыл бұрын
How old are you ???
@dannyhampton2 жыл бұрын
24
@carmelo6972 жыл бұрын
🍓
@jhurlac761711 ай бұрын
Too small and flimsy. Buy better quality universal ones. Its worth around double that price
@dugrafitiАй бұрын
playboy
@mbv51002 жыл бұрын
Why like this
@dhoyskie55862 жыл бұрын
"Looks pretty.... ehhh"
@12luv3652 жыл бұрын
What a waste! you could have sold it, got some coin back or gave to goodwill or to a subscriber.
@ironmb86 Жыл бұрын
Maxton designs make cheap ass front lips… they’re the same quality as eBay.
@dannyhampton Жыл бұрын
I know. Sadly no one else makes them for this car.
@Lizardmonster Жыл бұрын
When your parents are rich and spend your dads money lol what a waste 😂
@dannyhampton Жыл бұрын
Hamptontuning.net
@michaeltipler567422 сағат бұрын
Very childish of you Can yell your privileged
@gshotthat32793 жыл бұрын
lmfaoooo
@robertriddle9452 жыл бұрын
Waist of anybodys time...you won't learn anything from this video
@dannyhampton2 жыл бұрын
Ty
@KevinNguyen-zn4vv2 жыл бұрын
Skin it with real carbon fiber. That's my plan.
@dannyhampton2 жыл бұрын
Ahhh good idea
@henrysuarez9590 Жыл бұрын
lame
@59ripodb3 ай бұрын
🧠🚮🤦♂️🤡
@dannyhampton3 ай бұрын
Thanks bb
@s9intvfx2 жыл бұрын
Bruh what a waste
@danielbentley81032 жыл бұрын
It's garbage 🗑
@That.red.seat12 жыл бұрын
Daniel Bentley I’ve had mine for months, taken it way above 100mph and it’s still holding up perfectly 🤷🏻♂️
@deporcali235 ай бұрын
@@That.red.seat1 how did you install yours ? Mine broke at 80 mph the same day i put it on lol
@That.red.seat15 ай бұрын
@@deporcali23 this was a long time ago now but it was put on with self tappers from the bottom and 3 bolts , one in the middle and one on each edge