Honda Civic Sedan Carbon Fiber Chin Splitter from ebay.(JDM)

[@semper_fi_centeno]

Thank you so much for your video. It was the only one I found where everything was explained thoroughly AND you showed us how it looked under the car. So helpful. I'm about to do my own now!

[@DrivenbyGears]

Awesome glad it helped some what.

[@passenger3]

Mine came today aswell 😃

[@passenger3]

Looks Sick

[@fabiancarrillo1134]

@@DrivenbyGears has your lip held up so far

[@TopFlightSecurity415]

Was told to have this installed by a professional but this looks very simple , I'm going to give it a try on my own

[@lth1999]

looks clean as hell! thanks for putting in the pictures with a walk around. too many videos are on youtube of people installing mods and then rambling for 20 minutes about something unrelated. i’m getting a similar one for my elantra gt soon, really excited

[@DrivenbyGears]

Thanks 4 watching

[@InfiniteGamerXI]

Awesome video man! Love how smooth the install was and how simple your explanations were ! Looks awesome ! Loved the music too!

[@DrivenbyGears]

I appreciate that it's so hard to find ebay music that works. Thanks 4 watching

[@aldee3018]

i hate to say it but so many car guys are doing exactly what you did and made it look so much harder than it really was and didn't come out anywhere near as good as yours. i'll be looking in from time to time for pointers.

[@jameschestnut7786]

Looks really good, follows body lines perfectly 👌

[@toddmccallum3879]

I have a '15 civic lx..love the addition to your car's front..way more aggressive..

[@dlo__3929]

Looks good. Going to do the same to my wife’s civic. Lol needs some love on her car.

[@DrivenbyGears]

Heck yea got more mods coming

[@bluerayan1001]

Did you drilled holes in car for installing splitters?

[@CappuccinoTheCat]

I have the same question!

[@super8bitvideos]

Ended up with one of these after I found out the sport spec lip for my volvo was $500 unpainted. Did not trust the hardware it came with so I spent an extra $10 on some bolts and heavy mounting tape. Does not budge. It is very obviously a $50-$80 lip. I wouldnt trust it in an area with a lot of debris and rocks on the road. Too much give and it being a 3 piece assembly leaves some pretty bad failure points where the pieces connect. If you use the small screws it came with, expect it to get ripped out under your tires at some point.

[@AnTran-rc8yj]

Wow huge different in the look. Nice!

[@static_Tricolor_camry]

It doesn't look too bad, but the problem with these eBay Front splitter is they don't fit perfectly and it sits kind of far inside the bumper. I prefer a Front Splitter that sticks farther out.

[@robertjames9547]

It looks like it comes with the car

[@edgarroach6472]

Looks great! Greets from San Antonio 👊🏽

[@DrivenbyGears]

Thanks 😊

[@saveJDM]

Smooth steps my guy

[@MTF1Gaming]

Hey, i am at work i know your vid but i can't rewatch now, did u have to drill any new holes ?

[@kiddgodz2339]

Hey nice video what is that black thing you used that lifts up the car?

[@DrivenbyGears]

Car ramps off amazon let me get the link

[@DrivenbyGears]

amzn.to/3vDkP7f

[@vernonkaris9462]

Hi may i ask where you bought yours from please i like the way your gos together ty Vernon 🙏

[@deporcali23]

Have you ever exp your lip cracking from highway speeds ? Perhaps hitting a bump or pothole etc im trynna figure out how to install my lip the second time bc the first broke in the middle section even with the stock screws idk how to secure it more maybe adding more screws in

[@TopFlightSecurity415]

@@deporcali23 mines fell off also, ordered another one and I'm going to have professionally installed this time

[@vinnyg5675]

Does this drill into plastic part of the front bumper or does it drill into the actual lip on it

[@DrivenbyGears]

drills underneath the car

[@beardedkountry]

Do you recommend maybe adding some double sided tape or do the screws gold it fit around the edge where the lip and bumper meet up?

[@DrivenbyGears]

It wouldn't hurt so far its held up good plus I added some struts in front.

[@reallyontiming2.0]

@@DrivenbyGears Did you remove the bumper to install the struts ? if not how did you do so , i bought the same exact lip & liking to get some rods , but can’t find any instillation videos specifically for this car.

[@oorileyxx2427]

@@reallyontiming2.0 You can screw the rods into the front license plate then into the lip

[@reallyontiming2.0]

@@oorileyxx2427 i already installed them like 2 months ago lol just took the whole bumper off and did it that way, thank you though

[@psx1986]

Looks clean af! Btw, is car lowered or stock height?

[@2.SlowHoonda]

Has this gotten any sun damage since the installation? Also have you had any issues with scraping? I know some civics are somewhat low as is, and driveways and parking garages can be an issue

[@Rasaal]

A year late but I don’t know about sun damage but I do know that scraping this is better than scraping up ur actual bumper

[@lsjionredlinesupercharged2049]

Looks clean 👌

[@DrivenbyGears]

Ty

[@deblon21]

Great 👌 video man, thanks

[@Tutorialesalexg]

Looks clean 🧼 got the same one

[@anthonye.4999]

My kit came with what looks like the pin stripe tape, what's it for?

[@ryzendragon9206]

I just installed this 2 weeks ago and I hit an uphill floor and it breaks on a 10 mph, this is good looking but easy to get break 😂

[@REDCLOUDENTERTAINMENT]

same had one put on had it on for 12 hours went 70 MPH and it flew off smh

[@KingKhan-fv6bs]

What size were the screws mate??

[@anthonyamador1235]

Hi! Have you had any issues with the chin spoiler causing the under liner for the center or the wheel liners coming loose? Thanks, Anthony

[@keylostax]

You put links to everything else except the front splitter

[@mlscruz]

nice vid. is this a universal splitteer? can it fit with other civic models?

[@cuan_jarlos0980]

Lol hank hill got himself a Si from selling propane, all jokes aside lol nice car

[@FK8DB]

What year is your civic sedan? I have a 2019 would this work

[@inchefnito6737]

Did u just screw threw the rivets?

[@Bird0fPrey7]

Sharp. You ever finish up?

[@vernonkaris9462]

Hi I got one coming for my 2016 crv

[@hazardstyles]

Do you have to drill in holes on the bumper or does the bumper already have existing holes?

[@DrivenbyGears]

Has only the bolt holes on the ends you line up honda not going have pre existing holes from factory.

[@PhOeNiXpIoLe]

Would this be light enough to be supported by double sided tape? I really don’t want to drill holes if I can avoid it

[@tedusmc]

You need 3m type from Home Depot.

[@bigo9293]

Definitely not

[@mrdj-qb7os]

Hey man. This is universal or design for civic? Coz many item like this says universal

[@jjwill9982]

looks good but why u did not get the 1 piece? i read in some forums this 3 piece falls off easily at high speed.

[@DrivenbyGears]

It's the wife's car she don't even get over 65

[@TheDuke085]

@@DrivenbyGears Lmaooooo

[@locoMS]

Did u have to drill holes? Cuz i dont see any holes under my bumper

[@DrivenbyGears]

Yea no holes why would it have them Hondas not going put them there from factory!!! You line up the bolt holes on the end . Then work your way around .

[@bhknova198]

Hey great video, I just wanted to ask what year civic you have? I found the kit you’re using and really like it. I’m trying not to remove the whole bumper like other ones.

[@DrivenbyGears]

2019

[@Ares_561]

Does it fit 19 civic with the sports trim

[@vergellim7361]

Hey there. How many holes did you drill total?

[@DrivenbyGears]

The holes are already there

[@reborninsanity]

What songs did you use?

[@fabiancarrillo1134]

Do you add double sided 3m?

[@baggedtuned8569]

Chin spoiler Item is out of stock. any other sellers that carry it?

[@kanyeasada2042]

Did it clear the ramps going down?

[@DrivenbyGears]

No it didn't

[@slyfoxtrades]

@@DrivenbyGears so did it get damaged coming down?

[@DrivenbyGears]

@@slyfoxtrades no I added 2 x 4s on the ramps in back

[@blacksheep1749]

Does it fit on any Honda ?

[@DrivenbyGears]

That one is specific to civic

[@elvinmendoza5978]

Exelent

[@mashuu_]

does this come with hardware?

[@ahmedibrahim4689]

does it work on the 2021 sedan?

[@DrivenbyGears]

Not sure

[@DrivenbyGears]

Fog lights ebay.us/7iGJGJ Rear bumper pieces ebay.us/rmCIb3 Side SKirts ebay.us/2S5SKW Chin CPoiler ebay.us/asm8j7

[@spicykevy]

did you use a drill bit or did you just force the screw straight threw the bumper?

[@joejones6968]

Looks great man!! But you must take those ugly ass splash guards off...( if you still have the car ...???)

[@monkeybrass3240]

Great

[@9oo9o]

Very nice how much

[@DrivenbyGears]

Click the link.

[@tjs193]

How does it hold up against high speeds ? Don’t want it breaking loose at 150mph in the si

[@DrivenbyGears]

I put some struts on it in front but it's solid

[@fabiancarrillo1134]

Just scree the middle in then adjust

[@thecontinuingadventureso-qs5zm]

I didn't think it was possible to make those look even WORSE!!! ; - )

[@brianmena7077]

who else paused at 3:43 😋😋

[@donnienimfo]

that things gonna bust

[@DrivenbyGears]

Still holding strong bro