Should you get T-bars for your Harley-Davidson

I've now traveled over 8,000 miles with my Thrashin Supply T-bars set up on my 2020 Harley-Davidson Road Glide Special. The question is, Should you get T-bars for your Harley-Davidson.
12 Days Behind bars series: • 12 Days Behind Bars (S...
Changed my bar setup: • From Apes to T Bars | ...
A Motorcycle Documentary: • A Motorcycle Trip Docu...
/ @fullthrottlehog
MY PRODUCTS: fullthrottleho...
CHECK OUT THE LINKS TO THE PRODUCTS I USE BELOW. These are affiliate links, and you can show your support for the channel at no cost to you.
#harleydavidson #harleydavidsonmotorcycles
Email: [e-mail]
_____________________________________________
Send Mail To:
FULL THROTTLE HOG
P.O. BOX 710532
Santee, CA 92072
_____________________________________________
This channel covers a lot of motorcycle vlog type of content. We talk about all things motorcycles, product review, video editing, and cinematic type of sequences. I ride a 2020 Harley Davidson Road Glide Special and we travel to as many motorcycle rallies and other events throughout the year. If you're into Motorcycle vlogs, or that style of content, please subscribe and follow along.
All products listed above I have personally used, owned, or benefited from. Being an Amazon associate, I earn from qualifying purchases at no cost to you.
FUN ACCESSORIES:
MY FAVORITE CUP HOLDER: amzn.to/3KpagPq
MY FLOORBOARDS: amzn.to/3jd0t1P
MID-FRAME HEAT DEFLECTORS: amzn.to/3jxeDYe
My GRIPS: amzn.to/3F4CtZg
MY SEAT: amzn.to/3L1mWNq
BAD KARMA Book by Paul Wilson: amzn.to/31ipUGh
CAMERA GEAR and EDITING
My main B-Roll Cinematic Camera 1: amzn.to/2XPE3eK
My B-roll ND Filter: amzn.to/3SVFyjZ
My favorite B-Roll lens: amzn.to/41PcOxc
My Vlog lens: amzn.to/3my11Dg
image stabilizer for cinematic footage (Cinema Combo): amzn.to/3IWDvYa
Stabilizer: amzn.to/3ITWrqv
My Editing PC: amzn.to/3ZrzMsS
My Editing Monitor: amzn.to/41QPFKL
__________________________________________________________
Main Action Cam: amzn.to/2XPEohw
My Action Cam 2: amzn.to/3ZsBtWO
Action Cam Mount Arm: amzn.to/3yaQKx2
__________________________________________________________
My Drone: amzn.to/32bIyi3
My Drone ND Filter: amzn.to/3j3xbPY
__________________________________________________________
__________________________________________________________
My Windscreen: amzn.to/2YjC7bR
2nd Windscreen: amzn.to/3IWEGXA
__________________________________________________________
My Road Glide Tour Pack: amzn.to/3KXnVyh
__________________________________________________________
My BEST Tie Downs: amzn.to/2FGrwRD
My Wheel Chock Stand: amzn.to/3j1odTo

[@beach_bum_dean]

T-bar setups really look right on certain bikes, but think them an odd look on my Road King Standard. So, went with the KST pathfinders; which have tons of adjustability so I can get about the same width of T-bars with a better hand position, for me that is. I'm not a big dude and have short arms.

[@FullThrottleHOG]

Nice! KST makes great products as well. Thanks for watching.

[@scooterbernieamputeeharleyride]

Thanks, I don’t think it would work on my Street Glide Special! Great vid! ✌🏼🇺🇸🇺🇸🇺🇸

[@FullThrottleHOG]

Thats probably a good point. But, thank you for watching anyway. Be safe.

[@2wheeltommy996]

Saw that bike in Waukon, Iowa. Looked really dope. Love Thrashin Supply.

[@FullThrottleHOG]

Thank you! I appreciate you watching the video. Be safe.

[@rafygolf67]

I have the same exact same t bars but I set up the gauges in front of t-bar clamp . I have about 5,000 miles on it. love this set up.

[@DeBa1226]

A 10-12” apes I think fit my riding. I think one day the beach bars we rode with 20 years ago, will come full circle and be a bar of choice. Bars are as important as our seat as they can make or break your riding experience.

[@ooc1977]

thank you, you are the only one that stated how tall they are, im 6,2 on my roadglide has 16" factory 47 and i want t bars

[@FullThrottleHOG]

Just a heads up for an update. I did change it out to the 9.5 inch pull backs. And its way better with the taller risers.

[@The_Lost_Alaskan78]

Those roads are so rad. It’s not even close to what I think of when I think about riding in California.

[@hdlstns]

This is the exact question I have. Currently riding with Fat Baggers Inc. 14" bars on my 2020 Road Glide. I Love the look of the Thrashin' Supply bars and risers plus top triple tree but I put 20k+ miles on my bike a year. You are taller than me so I think the same riser and high bend bars would be perfect on me without the spacer. Thank you again for another detailed review! I hope to catch up with you this year at the Stubborn American Rally.

[@joannewinters9616]

Thank you for all the great information Take care ride safe

[@frankeastwood7478]

Jeez you put your own pegs on, by yourself no less. I'm impressed, must be a real biker.😂😂😂

[@FullThrottleHOG]

Used my own Allen keys and everything. Ha ha.

[@ardyrides834]

Fads and Trends come and go. Easy Rider (Peter Fonda) was a Trend Setter. The Terminators "Fat Boy" became a Fad. Jax Teller was a Trend Setter (the Club Bike look). Holligan/Stunt Riders have adopted a Club Style look and with other upgrades have a Bike tall enough to do Doughnuts without scraping the Primary, and a seat and handlebar setup that helps pull a Wheelie on demand. To each his own...

[@BogeyBiker]

Great info! I just posted a new video today asking this very question. I bought a 2021 Road Glide Limited. It’s hard to understand what all you need to get this setup right for you, but this certainly helps. Thanks!

[@thetraveler5798]

Thanks for the input 👍🇺🇸‼️ 😎🤙

[@FullThrottleHOG]

Thank you for watching.

[@SJHixon-fi1ub]

I literally just asked this question. I have been looking at them for the last month.

[@FullThrottleHOG]

Nice! I hope this video provided you with some good info.

[@SJHixon-fi1ub]

@@FullThrottleHOG we shall see, I just bought them!!!!

[@BigBert]

Nice work mate, I’m glad you are still enjoying the new set up. It looks great 😎🤙🏻

[@JustGKue]

Just getting Tbar setup...I would say...it's cool...but I need more bend so I can comfortably lean into my back rest.

[@JeremiahHedrick-wc9hu]

I could totally see my house on this video….sick. If you’re ever in the neighborhood, stop by and say what’s up look for the black and yellow road glide just off of Mast couple streets past Carlton Hills. 😂

[@darrellochs6700]

I’m 5’11” on a great day I run the exact same setup on a 2021 RG but I have the 9 1/2 pullback risers. The way I have my gauges adjusted I see the same view of my screen as you do. I love the way it feels and handles. If any of y’all have any questions I’d be more than happy to help you out on this I’ve run this setup on a RG and SG.

[@DatzDog]

Hey bro, did you have to extend clutch and brake lines plus controls heated grips ect? Thanks

[@basedhardhands]

All the T-bar set ups I've seen have been for 2014 and up. Any idea if anybody does then for 2013 and older?

[@jimweagant8920]

Thanks for the great video 👍👍🇺🇸

[@stevem9766]

You see it like I do . Let’s go for a long ride ? N.C.

[@harryhowell5644]

I fail to see how t bars are comfortable. Plus they look goofy to me.

[@FullThrottleHOG]

To each their own.

[@jaimitindel5508]

What kind of go pro mount do you have in this video and how do you like its performance, TIA,

[@FullThrottleHOG]

Its the GoPro Grip Gooseneck mount. Works well, but definitely get the GoPro brand one. I've tried some other knock off versions but they were terrible.

[@papap.8006]

Nice

[@FullThrottleHOG]

Thanks PapaP. Be safe.

[@papap.8006]

@@FullThrottleHOG Will do and same to you!

[@MrAgentEcho]

Are you in lakeside? i saw 67 and 52 and i know those roads. I rode the 67 yesterday to get julian pie.

[@FullThrottleHOG]

I’m in Santee. Gotta love that Julian apple pie. 🤙🏻

[@Six5Rider]

Great stuff man! Quick question, what extension did you use for the additional rise on the riser? I feel like mine would be mor comfortable if I go up another inches or 2. I got the 9.5 + the high bend bar.

[@groundzero.]

Why do you call this a T bar setup, when its just a taller riser? I put 4" risers extensions on my 19 Road King so that I could keep the stock bars and the cover for the 3xtree mount.

[@The_Lost_Alaskan78]

FnA Cotton!! Now I have to find a way to get it past the wife.

[@ajoe2544]

I went with the Arlen Ness Method set up 1200 all said n done

[@louisgiardina8918]

I personally won’t get this set up I think they look really nice but 4 grand no thanks I’ll stay with my current set up witch is just fine

[@Six5Rider]

2k