Shovelheads Ironheads and an Evo

Ebay Store Link: stores.ebay.com...
T-Shirt Link: www.ebay.com/i...
New Design www.ebay.com/i...
Instagram Link: / frostcycleshack
Thanks to everyone for watching and I appreciate your support!
Subscribe here and follow me on Ebay and Instagram!

[@Jon95McC]

I'd love to see videos of these bad boys running. Maybe when it's a little bit warmer out?

[@jfrost77hd]

JJM Yeah I'll definitely get some videos of them running once it gets warmer out, thanks for watching and stay tuned!

[@douglasklukowski8308]

Good for u brother looks good and sounds amazing 🤙

[@Mississippigunclub]

I seen a dual throat S&S air cleaner on the shelf! That would look good with my dual throat S&S carb on my 68 Shovel!!!

[@angusandleigh]

Looking good!...that Evo looks about right to me, and if I had my way I'd have a place for it when you're done with it...that '65 is a pretty cool bike too.

[@jfrost77hd]

angusandleigh Hey Paul, yeah come on down and pick it up...I'll even let you pick the color! Haven't buttoned everything up yet but it runs and sounds great! As always thanks for watching man! 👍

[@Uncle_Chuck]

To get a 70’s springer sent to Australia complete is dear but what if I get one sent in pieces? I so want one

[@bassrogue8640]

been following you from new zealand wicked work man .. its very hard to get old harleys here i aspire to build a shovelhead bobber. ill be sure to source parts from you when i finally get there.. cheers keep up the good work

[@jfrost77hd]

Courtney Curtis-Smith Hey thanks man I really appreciate that. Stuff is getting fewer and prices are getting higher but it's still out there. Be glad to help you out when you find yourself one, cheers and thanks for watching!

[@bassrogue8640]

sweet man thats great. ive been lookin around im thinking getting a sportster frame would be best for a bobber build.. what do think? what year is the most versatile and will i have to do much fabrication to get a shovelhead in there.. being limited here in new zealand maybe i should settle for a evo?

[@jfrost77hd]

Courtney Curtis-Smith Yeah I'm guessing an Evo might be easier to find than a Shovelhead or Ironhead? Squeezing a shovel engine in a Sportster frame would be alot of fabrication.

[@robertashbrook3157]

good ta see yer vid. been doin the same tryin ta stay warm. Damn Ohio weather. put a top end on the 81 and I'm wiring the basket. Bought the starter lever for mine too. Well have a goodin and hope for warmer weather.

[@jfrost77hd]

Brooks Ashbrook Hey Brooks good hearing from you man! Yeah staying busy and trying to stay warm. Glad to hear your shovels coming along, I'm about ready to start on the next one. Take it easy man... the warmer weather will be here before we know it. 👍

[@brianfrazier5215]

Where can I get that starter lever at..?? I checked your eBay page.. couldn't find it

[@dannynoel993]

i got one of those stands lol after a couple of hits u will take that down one off. i take both off and put them under the table. And i notice the wheel clamps were different as soon as i unboxed it. works good.

[@jfrost77hd]

DANNY NOEL Yeah the old style lift the pedal mounts were squared and skid on and off, the new style down pedal has a round bolt set screw do it's a pita. I'll probably drill and pin it.

[@williamisaacs6569]

You have some nice bikes. I picked up a 1982 Roadster to clean up and may need some help but your to far away. But maybe I may buy one you already did up.

[@JostheRebel]

Hey brother ! Great to see ur doing so well ! Sure hope u can keep with paying the bills. The reason u have been missing my comments; Im just out off the hospital after removing a second even larger braintumor ! So i'm busy working on my recovery but its gone be slow. This one had a lot more impact on all normal fuctions in my body. But w'll get there. Just cant wait to take out the bike out like u buddy !! lol Keep up the great work and vids !! And stay Cool, but that comes naturall for us bikers right...

[@jfrost77hd]

The Rebel 22 Damn Jos, sorry to hear that! Glad you got it taken care of and hope you heal up and recover well. Wish the best for you and hopefully you can get back on two wheels before to long. As always thanks for watching!

[@ammetalworks]

Fuck I love your vids man!

[@jfrost77hd]

Adam Malleck Hey thanks for watching Adam!

[@michael7324]

I'm a shovel guy but I like that EVO

[@robert-hy9dq]

I see you have a couple of old S&S two throats are they for sale ?

[@lightning334-]

man that amf tank is cool

[@jfrost77hd]

Charles Barber Yeah I love the old Amf style tanks, kinda steals the show now from the rest of the bike. Thanks for watching!

[@billcarothers9182]

That bike is beautiful!!

[@billcarothers9182]

The shovel !!

[@JRTHATCHGREY]

bad ass as always. keep on with the good work man

[@adhdandme]

I need a front fender for an 84 sporty

[@maryspeight2840]

Damn , I miss my 84 FXSB . Keep up the good work. Cheers from G.S. in N.C.

[@jfrost77hd]

I've got one of those too, it needs work I haven't got around to messing with it yet. Thanks for watching!

[@samuelwhiting5051]

Really digging' your stuff brother! What happened to the 72 Ironhead you were building? Super hard to find bits and pieces here in Australia for that 70's style.

[@jfrost77hd]

Samuel Whiting Hey thanks man, yeah the good stuffs getting harder to find but still come a crossed it here and there. Sold the 72 to a buddy who sold to a customer of his. Its powdercoated some crazy candy apple green now. Didn't necessarily need it but the engine is getting overhauled top to bottom. I'll get video of it sometime. Thanks for watching!

[@moto238]

Once again, summer's just around the corner. Glad to hear that everything's workin out for you. Love the Tee-shirt!! always lookin forward to your video's Take Care Jared..

[@jfrost77hd]

jeff brown Hey Jeff thanks alot, yeah I'm getting the itch for warmer riding weather for sure. Like starting any business I guess, its scary but really enjoying doing what I love and its paying the bills...so far so good! Thanks again for watching buddy and glad you like the shirt!

[@my79kz]

The EVO 's are pretty descent engines I have a 02 XL never had a problem with it it's always ready for me to get on and ride.

[@jfrost77hd]

l_t_d I agree, I had an 01 XLC years ago that was a good running bike. Figured I better start getting more familiar with them again. Thanks for watching!

[@chrisronda17]

Hey bud, do you rewire the bikes different from stock. I've been looking for a video on wiring an ironhead.

[@jfrost77hd]

chrisronda17 Yeah usually that's one of the issues with older bikes. Over the years people bandaided this or that so I usually just rewire them as simple as possible. Have never made a video on it...usually not my favorite thing to do.

[@johncleaver1975]

WHAT DO YOU HAVE FOR SALE AT THIS TIME??? PLEASE SEND PICTURES AND PRICES$$$

[@mikeysmith3755]

Funs

[@tylernelson1993]

god damn. I love that Shovel with the king and queen seat. I wish I had some money to throw it at ya..

[@jfrost77hd]

1225tdnelson Yeah the bikes came a long way from where I got it, it runs great too! Thanks for watching man!

[@recluse1312]

great video brother. that AMF tank looks bad ass.

[@jfrost77hd]

Recluse 13 Yeah amf had some pretty cool tank designs. I've got a collection of original paint ones too. Thanks for watching man!

[@daveross5314]

Dang brother for a guy your age you are very knowledgeable! !!

[@jfrost77hd]

Hey thanks Dave I appreciate that, I definitely don't know it all but try to learn as much as I can and really enjoy these old bikes! Thanks for watching!

[@lightning334-]

checking in

[@tilleypatrickpt]

Hey buddy I am going through a 79 ironhead at the moment and ran into my first bump I pulled the engine and removed the primary cover and I think there is something broke and I have no idea what it is. something to do with the starter if I could send you a short video of what it is I know you could tell me what the deal is. any help is GREATLY appreciated

[@jfrost77hd]

Patrick Tilley Hey Patrick, if you pulled the primary and a brass washer fell out that's normal. It's the thrust washer that goes on the end of the shaft that goes into the primary.

[@tilleypatrickpt]

jfrost77hd the piece that has the reverse thread nut on the end slides in and out and appears to be broken on the end that slides inside the bendix. it didnt have a brass washer either.I don't know how to send you a picture or I would. thank you for the reply btw, much appreciated.

[@BillRiccio]

#tatromachine

[@williamisaacs6569]

Where are you located ? May need some work done.

[@jfrost77hd]

William Isaacs I'm just north of Dayton Ohio, mainly building bikes and selling parts right now. Plan to start servicing bikes once I get more space though, thanks for watching!

[@Yakcm2]

Glad too hear business is doing good, kinda curious though, what'd ya ever do with the 96" drag bike? That thing was bad ass!

[@jfrost77hd]

Kevin M. Hey thanks Kevin I really appreciated that. I still have the 93" Ironhead dragster, probably pull the engine for a ridiculous street bike this summer. Thanks for watching!

[@Yakcm2]

jfrost77hd cool, that would be a totally bad ass street bike, probably not very practical...but who cares? It's about the fun 🤘

[@jaymoe5.7]

Good to see one of your vids again, and i like those 60s and 70s bikes you have, those are sweet! And do you still have your Firebird? Its been a long time since you made a video on that.

[@jfrost77hd]

Hotrod Hemi Hey thanks man, yeah I try to stick with the older stuff. Sadly I sold the Firebird about 6 months ago, hated to do it but I was limited on space to start the business. The business is doing good but once again I'm out of space...funny how that happens. Thanks for watching!

[@jaymoe5.7]

jfrost77hd Haha yeah if it helped get money and space to start your buisness id say it was worth it, and i know the feeling, i built my garage once i needed space for projects, then i built a shed for storing more projects, and then another one because i have too much stuff, either way good to see ya back, take care man

[@papablista627]

Oh man you've gone to the dark side, See no EVO ,Hear no EVO ,Ride no EVO , Na just kidd'n I like a nice Evo looks like you have a fine one there, i have my 77 in pieces again , doing some starter and solenoid changing, I like that starter lever, that puny white wire from the controls always leaves me worried, May just have to get me one of those looks beefy too. Pray for warm Bro, Remember Wrench, Ride, Repeat, Now off to eBay to check out your stock. DMSears

[@jfrost77hd]

PaPa Blista I was waiting for that comment, knew that one would eventually come up! I know I know... but a good deals like walking away from money and I just can't do that. Honestly it was nice for a change of pace and I hadn't done a open belt drive so was a good learning experience. Just something to turn a buck on but it ended up being a pretty nice bike! Thanks for watching my friend!

[@papablista627]

You the man J-red I do like that EVO your building looks as classic as a EVO can you have the touch.BTW what camera setup are you using, I just purchased a Go Pro 3+ Silver wasn't my first choice but the price was right. My cam bit the dust back when I was doing the rewire on my 77 that's why it was never continued or updated ( BTW the wiring is nice like new ) I hope to put up some motovlogs and how to's out this summer, I wanna take a scoot out west RT66 I hope, I wouldn't mind stopping by your place also were only 50 miles apart give or take from each other. On another point I am going to need some of those Voss clamps for exhaust and some intake seals & and clamps, I'll get that order in soon. While working on my start system I found my intake seals are wrapped with Teflon tape, Go figure. When I pulled it in in fall It was starting to only fire on one jug (the rear) until it warmed up. Maybe that is the cause. Gotta find the time to get it back together spring is coming... Be safe brother...

[@jfrost77hd]

PaPa Blista Hey buddy, yeah been staying busy. I use a Sony Cybershot, I liked my older one better but it works pretty good. Yeah those intake gaskets are a pretty common replacement every few years, they dry out and crack then cause intake leaks. I'd probably throw some new plugs at it too. Be glad to send you out some stuff whenever your ready. Take it easy man and thanks for watching!

[@ryanschiavo5621]

how much for the shovel

[@jfrost77hd]

Ryan Schiavo Gotta crunch some numbers first but should have a price in the next couple weeks. Thanks for watching!

[@ryanschiavo5621]

Okay cool

[@elliottneville1801]

nice shovel! did that amf tank bolt straight on or did you have to make some adjustments?

[@jfrost77hd]

elliott neville Hey thanks man, its a king sportster tank. Front mount is bolted to a stock hole, rear I might run a spring from tab to tab. I might drop it lower in the front, I'll have to smooth some of the neck to squeeze it on. Thanks for watching!

[@elliottneville1801]

ok thanks for the info! :)

[@stratosjeff7007]

holy $hit i love that shovel!!

[@jfrost77hd]

stratosjeff Lol, yeah I'm pretty stoked about it too. Hate to sell it but I can't keep them all, thanks for watching man!

[@l.t.keefer9310]

Some nice additions there, what happened with the 93" Ironhead ? glad to see you doing vids , been awhile

[@jfrost77hd]

EnGraver L.T.K. I've still got the 93" Ironhead, it was by that new 65 Xlch. Still in the air on it but think its going in a titled frame for the streets. Now that will be a fun bike! Thanks for watching!

[@l.t.keefer9310]

93" Sleeper bike ?

[@jfrost77hd]

EnGraver L.T.K. Probably not a total sleeper but enough to get underestimated.

[@l.t.keefer9310]

Knew a guy had 103" Ironhead in stock looking bike , used to tear crotch rockets up with it