ShowXpress Generator Tutorial

[@pushermode]

Straightforward and informative. Thank you.

[@fg281]

How do I add intimidators to an existing project?

[@maxtaiani]

It is no different than adding any other fixture to an existing project/database. You will want to go to the fixtures menu. Make sure you have an address free for your new fixture you would like to add. Ensure you set your light with the correct address. Then it’s pretty much the normal programming procedures from there.

[@Gonzalez33veracruz]

Brother can you please make videos on doing maby different functions with spot 360 and strobing etc...

[@maxtaiani]

It’s been a while since I have uploaded a video. When I next get the fixture out I’ll try and get something together showing the functions and building them into the live editor

[@Reeper212]

Question... is there a way to change the light's idle pose in showxpress?

[@maxtaiani]

As far as I am aware this would be within the firmware of the fixture. So unfortunately you wouldn’t be able to override value 0 with a different position of the fixture. Some fixtures will probably have this functionality within the settings but doing something like this remotely via showxpress isn’t possible.

[@DJJEZA718]

what if we want it to do for multiple lights , not on the same address ?

[@maxtaiani6279]

You would need to add another fixture block into ShowXpress. Then address the second fixture with the next free available address. It would just be a case of repeating the same steps as shown in the video.

[@maxtaiani]

As per Max's comment below. If you have any issues feel fee to ask. Though your comment was posted well over a year ago so would assume you would have sorted this apologies.

[@brandoncubahiro3001]

why when i click on the fixture the circle don't come? anyone can help me please

[@maxtaiani]

@@brandoncubahiro3001 You need to select the channel that the generator is going to control eg Pan/Tilt, Dimmer, shutter etc.. on the later version of ShowXpress I believe this is a tickbox on the right side of the draw box